headlights NISSAN X-TRAIL 2019 Owners Manual

Page 7 of 400



> (GLW    0RGHO 7$@
GUID-7CE 776F2-0199 -429C-BE30 -880769DCFED A
JVC0642X
1. Engine hood(P.3-22)
2. Windshield wiperandwasher
Ð Switch operation (P.2-47)
Ð Window washerfluid(P.8-19)
3. Headlight cleaner*(P.2-44)
4. Front camera* (P.4-10, 2-37,5-39)
5. Sunroof* (P.2-52)
6. Power windows (P.2-50)
7. Front viewcamera* (P.4-10) 8.
Recovery hook(P.6-12)
9. Headlights andturn signal lights(P.2-39)
10. Foglights* (P.2-45)
11. Sonar (parking sensor)system* (P.5-50)
Ð Park Assist (PA)* (P.4-17)
12. Tires
Ð Tires andwheels (P.8-36, 9-7)
Ð Flat tire(P.6-2)
Ð Tire placard (P.9-9) 13.
Outside mirrors(P.3-29)
14. Sideviewcamera* (P.4-10)
15. Sideturnsignal light(P.2-44)
16. Doors
Ð Keys (P.3-2)
Ð Door locks (P.3-4)
Ð Intelligent Key system* (P.3-10)
Ð Remote keylessentrysystem* (P.3-7)
Ð Security system(P.3-20)
*: ifequipped
Illustrated tableofcontents
0-3
EXTERIOR
FRONT
&RQGLWLRQ
([FHSWIRU&KLQD


Page 74 of 400



> (GLW    0RGHO 7$@
2-18
Instrument sand controls
High beam assist indicator light(if
equipped)
GUID-50 DB9FD6-A5 BA-4734-B4 8F-5B6262B 538DF
The indicator lightilluminates whentheheadlights
come onwhile theheadlight switchisin the ªAUT Oº
position withthehigh beam selected. Thisindicates
that thehigh beam assist system isoperational. (See
ªHeadlight andturn signal switchº (P.2-39) .)
High beam indicator light
T32A1308 27-409109 9F-CB07-4 276-B667-3BD074F2E 546
The high beam indicator lightilluminates whenthe
headlight highbeam ison. The indicator turnsoffwhen
the low beam isselected. (SeeªHeadlight andturn
signal switchº (P.2-39) .)
Hill descent controlsystem onindicator
light (ifequipped)
T32A130 827-28B7FC 03-C4D5-4C6 C-8BFA-9E756 1E98498
When theignition switchisplaced inthe ªONº position
the hilldescent controlsystem onindicator light
illuminates brieflyandthen turns off.This indicates
that thehilldescent controlsystem isoperational.
The light illuminates whenthehilldescent control
system isactivated.
If the hilldescent controlswitchison and theindicator
light blinks, thesystem isnot engaged.
If the indicator lightdoes notilluminate orblink when
the hilldescent controlswitchison, the system may
not befunctioning properly.Have thesystem checked
by aNISSAN dealer.
For additional information, seeªHill descent control
systemº (P.5-30) .
Hill Start Assist system onindicator
light (ifequipped)
GUID-5D3BB 4C2-B651-4D95-98B6-BBF04E320 8E8
The light illuminates whentheconditions ofthe hillstart
assist system aresatisfied whenthevehicle isstopped
on ahill.
Then, thelight blinks whenthebrake pedalisreleased,
which indicates thatthehillstart assist system is
activated.
For additional information, seeªHill Start Assist
systemº (P.5-30) .
Malfunction IndicatorLight(MIL)
T32A1308 27-5D3C46 85-4828-40 4C-A15D-A0 C96B37A7ED
CAUTION:
. Continuing vehicleoperation withoutproper
servicing ofthe engine control systemand/
or Continuously Variable Transmission (CVT)
could leadtopoor driveability, reducedfuel
economy, anddamage tothe engine control
system and/orCVTsystem, whichmayaffect
the vehicle's warranty coverage.
. Incorrect settingofthe engine control sys-
tem may lead tonon-compliance oflocal
and national emission lawsandregulations.
When theignition switchisin the ªONº position, the
Malfunction IndicatorLight(MIL) illuminates. After
starting theengine, theMIL turns off.This indicates
that theengine control system and/orCVTsystem is
operational.
If the MIL illuminates whiletheengine isrunning, itmay
indicate thattheengine control system isnot
functioning properlyandmay need servicing. Have
the vehicle checked, andifnecessary repaired,bya
NISSAN dealerpromptly . If
the MIL blinks (ifequipped) whiletheengine is
running, itmay indicate apotential malfunction inthe
emission controlsystem. Inthis case, theemission
control system maynotfunction properly andmay need
servicing. Havethesystem checked, andifnecessary
repaired, byaNISSAN dealerpromptly .
Precautions:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o reduce oravoid possible damagetothe engine
control system whentheMIL blinks:
. Avoid driving atspeeds above70km/h (43MPH) .
. Avoid sudden acceleration ordeceleration.
. Avoid goingupsteep uphillgrades.
. Avoid carrying ortowing unnecessary loads.
Rear foglight indicator light(if
equipped)
GUID-3BE98C 0D-E553-453A-8DD7-D10 AB9D1576E
The rear foglight indicator lightilluminates whenthe
rear foglight ison. (See ªFog lightswitchº (P.2-45) .)
Security indicator light
T32A130 827-CAB130 D8-5BB2-4700-9816-9 655A9AA77 D6
The security indicator lightblinks whentheignition
switch isin the ªLOCKº ,ªOFFº position. Thisfunction
indicates thesecurity system* equipped onthe vehicle
is operational. (*immobilizer)
If security systemismalfunctioning, thislight will
remain onwhile theignition switchisin the ªONº
position. (SeeªSecurity systemº(P.3-20) foradditional
information.)
&RQGLWLRQ
([FHSWIRU&KLQD


Page 79 of 400



> (GLW    0RGHO 7$@
Stop/Start (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
T o change thestatus, warnings orturn onoroff any of
the systems/warnings displayedinthe ªStop/Startº
menu, usethe
switch
*
1
to select andthe
ENTER
*
1
to change amenu item:
. Display
Ð Stop/Start displayON/OFF
. Trip CO2 saving
The ªTrip CO2 savingº andengine stoptimemode
shows theCO2 saving andengine stoptimesince
the last reset. TheCO2 saving andengine stop
time canbereset bypushing theENTER
*
1
(T ype A)or
*
2
(T ype B).
. Total CO2 saving
The ªTotal CO2 savingº andengine stoptime
mode shows:
Ð The estimated CO2exhaust emissions pre-
vented.
Ð The engine stoptimethattheengine hasbeen
stopped bythe ªStop/Start orIdling Stopº
System.
NO TE:
The ªTotal CO2 savingº andengine stoptime
values cannot bereset andshow accumu-
lated ªStop/Start orIdling StopºSystem
information sincethevehicle wasbuilt.
ECO Drive Report (ifequipped) :
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Display:
This setting allowsthecustomer toenable/disable the
ECO Drive Report inthe vehicle information display.
1. Use the
switch
*
1
to select ªECODrive
Reportº . 2.
Press theENTER
*
1
to turn ON/OFF theECO
management displayinthe vehicle information
display .
View History:
This setting allowsthecustomer toreset thepast
history ofthe fuel economy andthebest fueleconomy .
Welcome Effect:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
Y ou can choose whether ornot todisplay thewelcome
screen whentheignition switchisplaced inthe ªACCº
or ªONº position. You can also choose thefollowing
items todefine howthewelcome screenlooks:
. Dial andPointer
. Display Effect
Select ªWelcome Effectsº usingthe
switch
*
1
and press theENTER
*
1
to select thismenu. Usethe
switch
*
1
to navigate between themenu options
and press theENTER
*
1
to turn each function ON/
OFF .
V ehicle Settings
GUID-41BC 8E41-F48A-4F7F-9C6 C-781FDBBDDD1D
The vehicle settings allowsthecustomer tochange
settings forthe following settings.
. Lighting
. Turn Indicator
. Unlocking
. Wipers
The vehicle settings canbechanged usingthe
*
1
, and theENTER
*
1
switches.
Lighting:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ªLightingº menuhasthefollowing options:
. Welcome Light
The welcome lightingcanbeset tobe ON orOFF .
From theªLightingº menu,selectªWelcome
Lightº .Use theENTER
*
1
to turn thisfeature ON
orOFF .
. Int.Lamp Timer
The internal lighttimer canbeset tobe ON or
OFF .From theªLightingº menu,selectªInt.Lamp
Timerº .Use theENTER
*
1
to turn thisfeature ON
or OFF .
. Auto Lights
The sensitivity ofthe automatic lightingcanbe
adjusted. FromtheªLightingº menu,selectªAuto
Lightsº .Use the
switch
*
1
and theENTER
*
1
to select therequired sensitivity .The following
options areavailable:
Ð On Earliest
Ð On Earlier
Ð Standard
Ð On Later
. Headlight Offdelay (ifequipped)
The duration ofthe automatic headlights canbe
changed from0to 180 seconds. Fromthe
ªLightingº menu,selectªHeadlight Offdelayº .
Use theENTER
*
1
to change theduration.
T urn Indicator:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The ª3Flash Onºovertaking featurecanbeset tobe
ON orOFF .From theªTurn Indicatorº menu,selectª3
Flash Onº.Use theENTER
*
1
to turn thisfeature ON
or OFF .
Unlocking:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
There arethefollowing optionsinthe ªUnlockingº
menu:
. I±KeyDoor Lock
When thisitem isturned on,the request switchon
the door isactivated. FromtheªUnlockingº menu,
select ªI-KeyDoor Lockº.Use theENTER button
to activate ordeactivate thisfunction.
Instrume ntsand controls
2-23
&RQGLWLRQ
([FHSWIRU&KLQD


Page 87 of 400



> (GLW    0RGHO 7$@
22. Battery Voltage LowCharge Battery
warning
GUID-1F3B1 DD2-74A2-40F0-99DD -0C12928BF4BE
This warning appears whenthebattery voltage islow
and thebattery needstobe charged.
23. Shipping ModeOnPush Storage Fuse
warning
GUID-EF187 6C4-3B83-41A8-8C73-D10D23C4 3B8F
This warning mayappear ifthe extended storagefuse
switch isnot pushed in(switched on).When this
warning appears, pushin(switch on)theextended
storage fuseswitch toturn offthe warning. Formore
information, seeªExtended storagefuseswitchº (P.8-
26) .
24. Headlight systemfaultwarning (if
equipped)
GUID-CB55 8F6A-E537-4F05-9A4F-E8 9B7379F99C
This warning appears ifthe LED headlights are
malfunctioning. Havethesystem checked bya
NISSAN dealer.
25. Power willturn offtosave thebattery
warning
GUID-3C3 13D28-5CF D-467B-9FC2 -AD5A25FA3340
This warning appears afteraperiod oftime ifthe shift
lever hasnotmoved fromtheªPº (Park) position while
the ignition isin the ON position foracertain periodof
time.
26. Power turned offtosave thebattery
warning
GUID-097 0ABC5-CB 0F-4B5F-A53 3-E364CA5A37F0
This warning appears aftertheignition switchis
automatically turnedOFFtosave thebattery .
27. Turn offheadlights warning
GUID-DB 00B5D9-C8 87-4399-9B3 9-3A515068CC94
This warning appears whenthedriver sidedoor is
opened withtheheadlight switchisleft ON and the
ignition switchisplaced inthe ªOFFº orªLOCKº
position. Placetheheadlight switchinªOFFº or
ª AUT Oº(ifequipped) position.Foradditional informa-
tion, seeªHeadlight andturn signal switchº (P.2-39) .
28. Press brakepedalwarning (forelectronic
parking brakeequipped models)
GUID-3E24 20B9-A238 -4616-97EB -11057AE20 0E0
This indicator appearsinthe following situations:
. The driver triestorelease theelectronic parking
brake manually withoutdepressing thebrake
pedal.
. Thevehicle isstopped onasteep hilland there is
a possibility ofmoving backward, evenifthe
electronic parkingbrakeisapplied.
29-30. Timeforadriver break? indicator
GUID-5B 6EF421-7 42A-4370-B6 98-64A84139A090
This indicator appearswhenthesetªTime foradriver
break?º indicator activates. You can setthe time forup
to 6hours.
31. Low outside temperature warning(if
equipped)
GUID-634E FF16-8C9D-4 93C-A41A-0932E824F6C 2
This warning appears ifthe outside temperature is
below 38C(378F) .The warning canbeset not tobe
displayed.
32. Chassis controlsystem faultwarning
GUID-F718EB 94-63B5-48EE-A64D-71 D88651FC6D
This warning appears ifthe chassis controlmodule
detects anerror inthe chassis controlsystem. Have
the system checked byaNISSAN dealer.(See
ªChassis controlº(P.5-28) .)
33. Speed limiterindicator (ifequipped)
GUID-E39 2035D-EAB2 -4999-AC5F-53B566DC 53DF
This indicator showsthespeed limitersystem status.
The status isshown bythe color.
For more details, seeªSpeed limiterº(P.5-41) .
34. Cruise indicator (ifequipped)
GUID-B56BF2 89-E01D-4B32-9422-29430209390 4
This indicator showsthecruise control system status.
The status isshown bythe color.
See ªCruise controlº (P.5-43) fordetails.
35. Continuously Variable Transmission (CVT)
position indicator (Continuously Variable
T ransmission (CVT)models)
GUID-9E3 23961-6ABA- 4FB7-B081-E0ED83362DE3
This indicator showstheautomatic shiftposition.
In the manual shiftmode, whenthetransmission does
not shift tothe selected gearduetoatransmission
protection mode,theCVT position indicator willblink
and achime willsound.
See ªDriving withContinuously Variable Transmission
(CVT)º (P.5-13) forfurther details.
36. ECO mode system indicator (ifequipped)
GUID-B9 E98019-342F -40AE-9C95-C4EB5F3AEDA6
The ECO mode indicator appearswhentheECO
mode system isturned on.
(See ªECO modesystemº (P.5-47) .
37. System faultwarning (ifequipped)
GUID-18 8904A7-896 7-4328-9B5E-8F5DDC 264F2B
This warning appears whentheBlind SpotWarning/
Lane Departure Warning systems arenot functioning
properly .(See ªBlind SpotWarning (BSW)/Lane
Departure Warning (LDW) systemsº (P.5-31) ,ªBlind
Spot Warning (BSW) system(ifequipped forEurope)
º (P .5-36) orªLane Departure Warning (LDW) system
(if equipped forEurope)º (P.5-39) .)
Instrume ntsand controls
2-31
&RQGLWLRQ
([FHSWIRU&KLQD


Page 94 of 400



> (GLW    0RGHO 7$@
2-38
Instrument sand controls
System operation
GUID-7C2E FAA2-1216- 43AB-AED6 -957C5B6F66 8D
The traffic recognition systemdisplays thefollowing
types ofroad
sign:
JVI1004X
JVI0973X
*
A
Latest detected speedlimit.
*
B
National speedlimit
*
C
No speed limitinformation.
*
D
No-overtaking zone.
*
E
End ofno-overtaking zone.
*
F
Conditional speedlimit,withthefollowing
available conditions:
*
G
Snow
*
H
Slip (rain 1)
*
I
Rain (rain2)
*
J
T owing
*
K
Generic
CAUTION:
. The Traffic SignRecognition (TSR)system is
intended asan aid tocareful driving. Itis the
driver's responsibility tostay alert, drive
safely, andobserve allroad regulations that
currently apply,including lookingoutfor
road signs.
. The Traffic SignRecognition (TSR)system
may notfunction properly underthefollow-
ing conditions:
Ð When rain,snow ordirt adheres tothe
windshield infront ofthe TSR camera
unit.
Ð When theheadlights arenot bright due
to dirt onthe lens orifthe aiming isnot
adjusted properly.
Ð When strong lightenters thecamera
unit. (Forexample, thelight directly
shines onthe front ofthe vehicle at
sunrise orsunset.)
Ð When asudden changeinbrightness
occurs. (Forexample, whenthevehicle
enters orexits atunnel orunder a
bridge.)
Ð In areas notcovered bythe navigation
system.
Ð Ifthere aredeviations inrelation tothe
navigation, forexample duetochanges
in the road routing.
Ð When overtaking busesortrucks with
speed stickers.
&RQGLWLRQ
([FHSWIRU&KLQD


Page 96 of 400



> (GLW    0RGHO 7$@
2-40
Instrument sand controls
position
T32A1308 27-7DA4961D-ADB9-4 8C2-AF3E-CB8FF4FAA66E
The
position turnsonthe headlights inaddition to
the other lights.
AUT Oposition (ifequipped)
T32A1308 27-42005CFF -F09D-4D2E-B51A-E A900BA8AB9 5
When theignition switchisin the ªONº position and
the headlight switchisin the ªAUT Oºposition, the
headlights, frontclearance lights,instrument panel
lights, rearcombination lightsandother lights turnon
automatically dependingonthe brightness ofthe
surroundings.
The headlights willturn onautomatically attwilight orin
rainy weather (whenthewindshield wiperisoperated
continuously) .
When theignition switchisplaced inthe ªLOCKº or
ªOFFº position, thelights willturn offautomatically
.
JVI0510X
CAUTION:
Do not place anyobjects ontop ofthe sensor
*
A
. The sensor senses thebrightness leveland
controls theautolight function.Ifthe sensor is
covered, itreacts asifitis dark, andthe
headlights willilluminate.
Headlight beam
T32A130 827-9CEFEA 7E-F212-4D2D -A4BD-2DF 2318D931E
JVI0856X
T ype A
JVI0994X
T ype B
T o turn onthe high beam, pushthelever towards the
front position
*
1
.
T o turn offthe high beam, returnthelever tothe neutral
position
*
2
.
T o flash theheadlights, pullthelever towards the
rearmost position
*
3
. The headlights canbeflashed
even when theheadlights arenot on.
If equipped, whenthelever ispulled towards the
rearmost position
*
3
after theignition switchis
placed inthe ªOFFº orªLOCKº position, theheadlight
will turn onand stay onfor 30 seconds. Thelever can be
pulled 4times forupto2minutes.
High beam assist (ifequipped)
GUID-A9E4 4EB1-B8C0 -468F-A5B4 -1A9C35090997
The high beam assist system willoperate whenthe
vehicle isdriven atspeeds ofapproximately 40km/h
(25 MPH) andabove. Ifan oncoming vehicleorleading
vehicle appears infront ofyour vehicle whenthe
headlight highbeam ison, the headlight willbe
switched tothe low beam automatically .
Precautions onhigh beam assist:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
WARNING:
. The high beam assist system isaconve-
nience butitis not asubstitute forsafe
driving operation. Thedriver should remain
alert atall times, ensure safedriving prac-
tices andswitch thehigh beam andlow
beam manually whennecessary.
. The high beam orlow beam maynotswitch
automatically underthefollowing condi-
tions. Switch thehigh beam andlowbeam
manually.
Ð During badweather (rain,fog,snow,
wind, etc.).
Ð When alight source similar toahead-
light ortail light isin the vicinity ofthe
vehicle.
Ð When theheadlights ofthe oncoming
vehicle orthe leading vehicleareturned
off, when thecolor ofthe light is
affected duetoforeign materials on
the lights, orwhen thelight beam is
out ofposition.
&RQGLWLRQ
([FHSWIRU&KLQD


Page 97 of 400



> (GLW    0RGHO 7$@
Ð When thereisasudden, continuous
change inbrightness.
Ð When driving onaroad thatpasses over
rolling hills,oraroad thathaslevel
differences.
Ð When driving onaroad withmany
curves.
Ð When asign ormirror-like surfaceis
reflecting intenselighttowards thefront
of the vehicle.
Ð When thecontainer, etc.being towed by
a leading vehicleisreflecting intense
light.
Ð When aheadlight onyour vehicle is
damaged ordirty.
Ð When thevehicle isleaning atan angle
due toapunctured tire,being towed,
etc .
. The timing ofswitching thelow beam and
high beam maychange underthefollowing
situations.
Ð The brightness ofthe headlights ofthe
oncoming vehicleorleading vehicle.
Ð The movement anddirection ofthe
oncoming vehicleandtheleading vehi-
cle.
Ð When onlyonelight onthe oncoming
vehicle orthe leading vehicleisillumi-
nated.
Ð When theoncoming vehicleorthe lead-
ing vehicle isatwo-wheeled vehicle. Ð
Road conditions (incline,curve,theroad
surface, etc.).
Ð The number ofpassengers andthe
amount ofluggage.
High beam assist operations:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVI0974X
T ype A
JVI0996X
T ype B
T o activate thehigh beam assist system, turnthe
headlight switchtothe ªAUT Oºposition
*
1
and push
the lever forward
*
2
(high beam position) .The high
beam assist indicator lightinthe meter willilluminate
while theheadlights areturned on.
If the high beam assist indicator lightdoes not illuminate
inthe above condition, itmay indicate that
the system isnot functioning properly.Have thesystem
checked byaNISSAN dealer.
When thevehicle speedlowers toless than approxi-
mately 25km/h (16MPH) ,the headlight remainsthe
low beam.
T o turn offthe high beam assist system, turnthe
headlight switchtothe
position orselect thelow
beam position byplacing thelever inthe neutral
position.
Ambient imagesensor maintenance:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
JVI0975X
The ambient imagesensor
*
1
for the high beam
assist system islocated infront ofthe inside rearview
mirror. To keep theproper operation ofthe high beam
assist system andprevent asystem malfunction, be
sure toobserve thefollowing:
. Always keepthewindshield clean.
. Donot attach asticker (including transparent
material) orinstall anaccessory neartheambient
image sensor.
. Donot strike ordamage theareas around the
ambient imagesensor. Donot touch thesensor
lens thatislocated onthe ambient imagesensor.
If the ambient imagesensor isdamaged duetoan
Instrume ntsand controls
2-41
&RQGLWLRQ
([FHSWIRU&KLQD


Page 98 of 400



> (GLW    0RGHO 7$@
2-42
Instrument sand controls
accident, contactaNISSAN dealer.
Daytime runninglightsystem
T32A1308 27-03F4324 C-0702-4A59- BBC8-01F30381336D
Even ifthe headlight switchis* position, thedaytime
running lightswillcome onafter starting theengine.
When thelight switch isturned tothe
position, the
daytime runninglightwillturn off.
HEADLIGHT AIMINGCONTROL
T32A1308 27-A1D7D00 9-92AF-4459-81E1-BE4387A9587 0
JVI0477X
Manual type
T32A130 827-76E07 AD9-CA96-4 4FA-AB9E-4D 2046E5D91B
The headlight aimingcontrol operates whenthe
ignition switchisin the ªONº position andtheheadlight
is on toallow theheadlight axistobe adjusted
according tothe driving condition.
When driving withnoheavy load/luggage ordriving on
a flat road, select thenormal position ª0º.
If the number ofoccupants andload/luggage inthe
vehicle changes, theheadlight axismay become higher
than normal.
If the vehicle istraveling onahilly road, theheadlights
may directly shineonthe rearview andoutside mirrors
of avehicle aheadorthe windshield ofan oncoming
vehicle, whichmayobscure otherdrivers' vision.
T o adjust tothe proper aimingheight, turntheswitch accordingly
.The higher thenumber, designated onthe
switch, thelower theheadlight axis.
Select theswitch position byreferring tothe following
samples.
&RQGLWLRQ
([FHSWIRU&KLQD


Page 100 of 400



> (GLW    0RGHO 7$@
2-44
Instrument sand controls
Automatic type
T32A130 827-66387 FF4-1CC3-4 BDA-8563-2 7530E2881E3
The headlights areequipped withtheautomatic
leveling system. Headlight axisiscontrolled automati-
cally .
BA TTER YSA VER SYSTEM
T32A130 827-61CE9F9 B-3E2D-4043-B79E-11558E12A2B 4
The light reminder chimewillsound ifthe headlight
switch isin either the
or
position andwhen
the driver's doorisopened withtheignition switchin
the ªOFFº orªLOCKº position.
T ype A:
If the ignition switchisplaced inªOFFº orªLOCKº
position whiletheheadlight switchisin the
or
position, thebattery saverfunction willturn offthe
lights afteraperiod oftime toprevent thebattery from
being discharged. Thelights willturn onwhen the
doors arebeing opened.
T ype B:
If the ignition switchisplaced inªOFFº orªLOCKº
position whiletheheadlight switchisin the
or
position, thebattery saverfunction willturn offthe
lights afteropening thedriver's sidedoor.
HEADLIGHT CLEANER(ifequipped)
GUID-1CA8 4B69-AE3D- 46F1-9857-AC 539E6A CDC6
JVI1002X
Headlight cleanerswitch(ifequipped)
The headlight cleaneroperates whentheheadlight is
on and theignition switchisin the ªONº position.
T o operate theheadlight cleaner:
. Push theheadlight cleanerswitch(ifequipped)
. Pull thewindshield washerswitchtoward you.
Ð The headlight cleaneroperates withthewind-
shield washer operation. Thisoperation acti-
vates onceeachtimeeither theignition switch
or the headlight switchisturned offand on.
Ð After thefirst operation, theheadlight cleaner
operates onceatevery fifthoperation ofthe
windshield washer.
See ªWiper andwasher switchº (P.2-47) .
CAUTION:
. Donot operate thewasher ifthe window
washer fluidreservoir isempty.
TURN SIGNAL SWITCH
T32A1308 27-37FAA258-28 0A-4947-AF4 4-BF748654 C1C2
JVI0857X
T ype A
JVI0995X
T ype B
CAUTION:
The turn signal switch willnotbecancelled
automatically ifthe steering wheelturning angle
does notexceed thepreset amount. Afterthe
turn orlane change, makesurethattheturn
signal switch isreturned toits original position.
&RQGLWLRQ
([FHSWIRU&KLQD


Page 118 of 400


 
> (GLW    0RGHO 7$@
2-62
Instrument sand controls
T32A130827- 5C15C98D-642F-4C71-AF7 E-6F66116BDA94
CAUTION:
. Donot leave thelight switch onwhen the
engine isnot running forextended periods
of time toprevent thebattery frombeing
discharged.
. Turn offthe lights whenyouleave the
vehicle.
INTERIOR LIGHTSWITCH
GUID-335 88F23-81BB -4ED3-B174-2DED4A67 B768
JVI0626X
*
1
The interior lightcanbeturned ONregardless of
door position. Thelight willgooffafter aperiod
of time unless theignition switchisplaced inthe
ªONº position whenanydoor isopened.
*
2
The interior lightscanbeset tooperate when
the doors areopened. To turn offthe interior
lights when adoor open, pushtheswitch, the
interior lightswillnot illuminate, regardless of
door position. Thelights willgooffwhen the
ignition switchisplaced inthe ªONº position, or
the driver's doorisclosed andlocked. Thelights
will also gooffafter aperiod oftime when the
doors areopen.
CONSOLE LIGHT
GUID-331 8167A-8EF4 -47AF-94BE-3AB215F DD69E
JVI0627X
The console lightwillturn onwhenever theclearance
lights orheadlights areilluminated.
MAP LIGHTS
GUID-BC9C 460F-9745-4 A52-9DAA-D5 14D2C8FB5 2
JVI0628X
Push thebutton toturn themap lights on.To turn them
off, push thebutton again.
ROOM LIGHT(ifequipped)
GUID-4A18 97F6-1FD4- 45F4-94D1-2 917001B299 E
SIC2063A
The room lighthasathree-position switch.
When theswitch isin the ªONº position
*
1
, the room
light illuminates.
When theswitch isin the ªDOORº position
*
2
, the
room lightilluminates whenadoor isopened.
The interior lighttimer willkeep theroom lightonfor
approximately 15seconds when:
. The keyisremoved fromtheignition switchwith
the driver's doorclosed. (modelwithout Intelligent
K ey system)
. Theignition switchisplaced inthe ªOFFº position.
(model withIntelligent Key system)
. The doors areunlocked bypushing theªUN-
L
OCKº
button (ontheremote controller or
Intelligent Key) orthe request switch(Intelligent
K ey system equipped models),with theignition
switch inthe ªLOCKº position.
. Any door isopened andthen closed withthe
ignition switchinthe ªLOCKº position.
The interior lighttimer willbecancelled when:
. The driver's doorislocked.
INTERIOR LIGHTS
&RQGLWLRQ
([FHSWIRU&KLQD


Page:   1-10 11-20 next >