phone NISSAN XTERRA 2006 N50 / 2.G Navigation Manual

2 Getting startedControl buttons and functions............................... 2-2
Control panel ................................................ 2-3
Opening/closing the cover of the Liquid Crystal
Display (LCD) (350Z only). ................................... 2-5
How to open the cover of the LCD .................... 2-5
How to close the cover of the LCD .................... 2-6
Start-up screen ................................................. 2-7
Menu screen types and how to operate ................... 2-8
Menu screens and their purposes ...................... 2-8
Using controls to adjust values, levels, etc. ......... 2-10
Map menu screen ........................................ 2-11
Functions disabled while driving .......................... 2-14
Operating maps ............................................... 2-15
How to view map screen ............................... 2-15
Map screen types ........................................ 2-16
Switching map view ...................................... 2-17 Moving around within a map
........................... 2-19
Changing the scale of a map .......................... 2-20
Storing your home location/address ...................... 2-21
How to store your home ................................ 2-21
Character (letter and number) input screen ........ 2-24
Phone number input screen ............................ 2-26
List screen ................................................. 2-28
Setting a destination ......................................... 2-29
Searching for a destination ............................. 2-29
Starting route guidance ................................. 2-32
Deleting a route ........................................... 2-34
Setting the voice guidance ................................. 2-36
Turning voice guidance on/off ......................... 2-36
Adjusting voice guidance volume ..................... 2-38

PHONE NUMBER INPUT SCREENYou can enter a phone number as a search
method to look for a business or facility.
INFO:
Only the locations included in the database in
the map DVD-ROM can be searched by the
phone number.
NAV2723
1. Use the joystick to highlight a number on the displayed keyboard.
NAV2724
2. Push <ENTER> . The highlighted number is
entered.
2-26
Getting started

4 Setting a destinationDestination screen.............................................. 4-2
Basic operation ............................................. 4-2
Setting a street address/residence as the
destination ........................................................ 4-4
Setting a Street Address ................................. 4-5
Setting a City Center .................................... 4-10
Setting an Intersection .................................. 4-14
Setting from map ......................................... 4-20
Setting a stored location as the destination ............ 4-22
Setting your home ........................................ 4-23
Setting from Address Book ............................ 4-25
Setting a previous destination ......................... 4-28
Setting the previous starting point .................... 4-30Setting from stored routes
.............................. 4-32
Setting a facility as the destination ....................... 4-33
Setting a point of interest ............................... 4-34
Setting a freeway entrance/exit ........................ 4-43
Setting by phone number ............................... 4-46
Setting a nearby place .................................. 4-47
Operations after setting a destination .................... 4-50
Available setting items ................................... 4-50
Adjusting the location of the destination ............ 4-51
Adding additional destinations to a route ........... 4-52
Viewing information about the searched
location ...................................................... 4-53
Storing a location ......................................... 4-54

.Others
— Phone Number:
Searches for a destination by the tele-
phone number.
— Nearby Places: Searches for a business/location near
your vehicle.
— Previous Starting Point: Sets the previous starting point as the
destination.
— Stored Route: Selects a stored route.
— Freeway Entrance/Exit: Searches for a destination from a free-
way entrance/exit.
— Intersection: Searches for a destination from inter-
sections.
— City Center: Sets the center of a city as the destina-
tion.
Setting a destination
4-3

When you are setting the destination to a facility,
the following methods are available.. Setting a Point of Interest
This allows you to find a facility by type, and
then have the system calculate a route to
that destination. Specify the region and city
of the destination to find it more quickly.
. Setting a Freeway Entrance/Exit
This allows you to set the destination to an
entrance or exit of a freeway, and then have
the system calculate a route.
. Setting by Phone Number
If you know the telephone number of the
facility, use this to find the facility by entering
the number, and then have the system
calculate a route.
. Setting a Nearby Place
This allows you to set the destination to a
facility located near the current vehicle
location or another location that you move
to by scrolling the map, and then have the
system calculate a route.
If there is any particular facility type that you
intend to use frequently, you can store it in
the list of nearby facilities.
“CUSTOMIZING NEARBY PLACES”
(page 6-33)
SETTING A FACILITY AS THE
DESTINATION
Setting a destination
4-33

NAV2787
SETTING BY PHONE NUMBER
INFO:
. If the area code of the specified telephone
number does not exist in the map data, the
system will not search for the location.
. Only the locations included in the database
in the map DVD-ROM can be searched by
the phone number. Personal phone numbers
cannot be used to search for a location.
1. Highlight [Others] and push <ENTER>.
NAV2815
2. Highlight [Phone Number] and push
<ENTER> .
The telephone number input screen is
displayed.
NAV2816
3. Enter the telephone number including the
area code.
4. After finishing the entry, highlight [Map] and push <ENTER> .
“PHONE NUMBER INPUT SCREEN”
(page 2-26)
4-46
Setting a destination

VIEWING INFORMATION ABOUT THE
SEARCHED LOCATIONInformation (street address and phone number)
about facilities stored in the map DVD-ROM
data can be displayed.
NAV2868
1. Set the destination using an appropriatemethod.
2. Highlight [POI Info] and push <ENTER>
.
NAV2869
3. Information about the location is displayed.
4. Push
<ENTER> , or highlight [Back] and
push <ENTER> to return to the previous
screen.
Setting a destination
4-53

MINOR ADJUSTMENT OF THE
STORED HOME AND LOCATIONSWhen you select [Edit], you can edit the
following items of the home or stored location.. Show Icon on Map
. Name (only for stored locations)
. Icon
. Sound
. Direction
. Distance
. Phone No.
. Group (only for stored locations)
. Entry Number (only for stored locations)
NAV2953
Show Icon on MapDisplays the home icon or the stored location
icon on the map.
1. Highlight [Show Icon on Map] and push
<ENTER> .
2. The indicator illuminates when the item is set. Then the system displays the icon on
the map.
NAV2954
Name (only for stored locations)Changes the name of a stored location.
1. Highlight [Name] and push <ENTER>
.
A character input screen is displayed.
Storing a location/route
6-17

NAV2963
2. Highlight the preferred distance option andpush <ENTER> .
The indicator of the selected distance
illuminates.
Available distance options: . 150 feet (50 m)
. 300 feet (100 m)
. 1000 feet (300 m)
. 1500 feet (500 m)
NAI0421
INFO:
Once you set the direction and distance to
sound an alarm, the system will sound the alarm
when the vehicle icon passes a half circle outline
on the map, as shown in the figure.
Example: Set to 300 feet (100 m) distance,
upward direction
&1Stored location icon
&2Vehicle icon
&3Setting range
NAV2964
Phone No.Stores the telephone number of the home or a
stored location.
1. Highlight [Phone No.] and push <ENTER>
.
The telephone number entry screen is
displayed.
6-22
Storing a location/route

NAV2965
2. Enter the telephone number of the home orstored location.
“PHONE NUMBER INPUT SCREEN”
(page 2-26)
3. Highlight [OK] and push <ENTER>.
The telephone number is stored.
INFO:
If the phone number of your home or a location is
stored, the phone number can be used to search
for the destination even if it is not included in the
map DVD-ROM data.
NAV2966
Group (only for stored locations)This allows you to group the stored locations.
By grouping the stored locations, you can utilize
the [By Group] option of the sort function more
effectively.
1. Highlight [Group] and push <ENTER>.
NAV2967
2. Highlight the preferred group and push
<ENTER> .
When the indicator of the selected group
illuminates, the stored location is classified
into the applicable group.
Storing a location/route
6-23