check engine NISSAN XTERRA 2013 N50 / 2.G Quick Reference Guide

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
STARTING/STOPPING THE ENGINE
AUTOMATIc TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to P (PARK).
Turn the ignition switch to ST ART.

MANUAL TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to N (NE UTRAL).
Depress the clutch pedal to the floor.
Turn the ignition switch to ST ART.

TURNING THE ENGINE OFF
For an automatic transmission, move the shift lever to the P (PARK) position, apply the parking



brake and turn the ignition switc
h to the LOCK position.
For a manual transmission, apply the foot brake, place the vehicle in 1st gear, apply the parking



brake and turn the ignition switc

h to the LOCK position.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
7
OUTSIDE MIRROR CONTROL SWITCH (if so equipped)
The outside mirror control switch is located on the



left side of the instrument panel.
To select the left or right mirror, move the switch
01 .
Adjust eac
h mirror to the desired position using the
switc

h
02 .
To prevent accidentally moving the mirror, move this
switc

h
01 to the center “neutral” position.For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
02
01
1275731_13_Xterra_NAM_QRG_102612.indd 710/26/12 11:18 AM