set clock OPEL MOKKA X 2017 Manual user
Page 83 of 247
Instruments and controls81If outside temperature drops to
0.5 °C, a warning message is
displayed in the Driver Information
Centre.9 Warning
The road surface may already be
icy even though the display
indicates a few degrees above
0 °C.
Clock
Date and time are shown in the
Info-Display.
Info-Display  3 101.
Graphic-Info-Display Press  MENU  to open the respective
audio menu.
Select  Time and Date .
Set Time
Select  Set Time  to enter the
respective submenu.
Select  Auto Set  at the bottom of the
screen. Activate either  On - RDS or
Off (Manual) .
If  Off (Manual)  is selected, adjust
hours and minutes.
Repeatedly select  12-24 HR at the
bottom of the screen to choose a time mode.
If the 12-hour mode is selected, a
third column for AM and PM selection
is displayed. Select the desired
option.
Set Date
Select  Set Date  to enter the
respective submenu.
Select  Auto Set  at the bottom of the
screen. Activate either  On - RDS or
Off (Manual) .
If  Off (Manual)  is selected, adjust the
date settings.
7'' Colour-Info-Display
Press  ; and then select  Settings.Select Time and Date  to display the
respective submenu.
Set Time Format
To select the desired time format,
touch the screen buttons  12 h or 24 h .
Set Date Format
To select the desired date format,
select  Set Date Format  and choose
between the available options in the
submenu.
Auto Set
To choose whether time and date are
to be set automatically or manually,
select  Auto Set . 
Page 84 of 247
82Instruments and controlsFor time and date to be set
automatically, select  On - RDS.
For time and date to be set manually, select  Off - Manual . If Auto Set  is set
to  Off - Manual , the submenu items
Set Time  and Set Date  become
available.
Set time and date
To adjust the time and date settings, select  Set Time  or Set Date .
Touch  + and  - to adjust the settings.
8'' Colour-Info-Display Press  ; and then select the
Settings  icon.
Select  Time and Date .
Set time
Select  Set Time  to enter the
respective submenu.
Select  Auto Set  at the bottom of the
screen. Activate either  On - RDS or
Off - Manual .
If  Off - Manual  is selected, adjust
hours and minutes by touching  n or
o .
Touch  12-24 Hr  on the right side of the
screen to select a time mode.
If 12-hour mode is selected, a third
column for AM and PM setting is
displayed. Select the desired option.
Set date
Select  Set Date  to enter the
respective submenu.
Note
If date information is automatically
provided, this menu item is not
available.
Select  Auto Set  at the bottom of the
screen. Activate either  On - RDS or
Off - Manual .
If  Off - Manual  is selected, adjust the
date by touching  n or  o.
Clock display
Select  Clock Display  to enter the
respective submenu.
To turn off the digital clock display in
the menus, select  Off. 
Page 120 of 247
118LightingHeadlight range adjustment
Manual headlight range
adjustment 
To adapt headlight range to the
vehicle load to prevent dazzling: turn
thumb wheel  ? to required position.
0:front seats occupied1:all seats occupied2:all seats occupied and load
compartment laden3:driver's seat occupied and load
compartment laden
Dynamic automatic headlight
levelling  3 119.
Headlights when driving
abroad
The asymmetrical headlight beam
extends visibility at the edge of the
road at the passenger side.
However, when driving in countries
where traffic drives on the opposite
side of the road, adjust the headlights to prevent dazzling of oncoming
traffic.
Vehicles with halogen headlight
system
The adjusting screws are located
above the headlight.
Turn the adjusting screws with the
screwdriver clockwise by half a turn.
To reset to left-hand traffic mode, turn
adjuster elements on both headlight
housings anticlockwise by half a turn.Caution
Have the adjustment of the
headlights checked after
deactivation.
We recommend consulting a
workshop.