PEUGEOT 1007 2007 Owner's Guide

2
34
MONOCHROME DISPLAY C
(without RD4 audio equipment)
General menu
Press the "MENU" button to access the general menu:
- trip computer (see corresponding section),- personalisation-configuration.
Turn the navigator to select the menu required, then confirm by pressing the navigator.
Presentation
It displays the following information:
- the time,- the date,- the exterior temperature (this flashes if there is a risk of ice),- the accesses check (doors, boot,...),- the warning messages (e.g.: "Antipollution system faulty") or information messages (e.g.: "Automatic headlamp lighting acti-vated"), displayed temporarily, can be cleared by pressing the "ESC"button,- the trip computer (see correspond-ing section),
Parameter configuration
There are three buttons and a navi-gator to enable you to control the screen:
- "MENU" to display the general menu, - "MODE" to change the permanent application (trip computer, date,...),- "ESC" to abandon the operation in progress,- Rotation of the navigator: move-ment on the display or changing of a setting,- Press on the navigator: confirma-tion of the selection.
"Personalisation-Configuration" menu
Once this menu has been selected, you can access the following func-tions:
- define the vehicle parameters,- display configuration,- selection of the language.

2
35
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the fol-lowing equipment:
- wiper linked with reverse gear,- "follow-me-home" lighting and duration.
Example: "Duration of the "follow-me-home" lighting"
Display configuration
Once this menu has been selected, you can access the following set-tings:
- brightness-video setting,- date and time setting,- selection of the units.
Once you have selected a setting, press the navigator.
Turn the navigator to change its value.
Press the navigator to record the change and move on to the next set-ting or press the "ESC" button to cancel.
Selection of the language
Once this menu has been selected, you can change the language used on the display (Deutsch, English, Espanol, Français, Italiano, Nederlands, Portugues, Portugues-Brasil).
For safety reasons, it is imperative that configuration of the multifunction displays by the driver takes place when stationary.

2
36
MONOCHROME SCREEN C
"Audio functions" menu
With the RD4 audio equipment switched on, once this menu has been selected, you can activate or deacti-vate the functions linked with the use of the radio (RDS, REG, RadioText), the CD or the CD changer (introscan, random play, CD repeat).
Presentation
This displays the following informa-tion, via the RD4 audio equipment control keypad:
- the time,- the date,- the outside temperature (this flashes if there is a risk of ice),- the audio source displays (radio, CD, ...),- the status of the accesses (doors, boot, ...),- the warning messages (e.g.: "Antipollution system faulty") or information messages (e.g.: "Automatic headlamp lighting acti-vated"), displayed temporarily, can be cleared by pressing the "ESC"button,- the trip computer (see correspond-ing section).
General menu
Press the "MENU" button to gain access to the general menu:
- audio functions,- trip computer (see corresponding section),- personalisation-configuration,- telephone (hands-free kit).Press the "" or "" buttons to select the menu required, then con-firm by pressing the "OK" button.
"Personalisation-Configuration" menu
Once this menu has been selected, you can gain access to the following functions:
- define the vehicle parameters,- display configuration,- selection of the language.

2
37
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the fol-lowing equipment:
- wiper linked with reverse gear,- "follow-me-home lighting" and duration.
Example: "duration of follow-me-home lighting"
Display configuration
Once this menu has been selected, you can gain access to the following settings:
- brightness-video setting,- date and time setting,- selection of the units.
When you have selected a setting, press the "OK" button, then press the "" or "" buttons to change its value.
Press the "OK" button to record the change and move on to the next set-ting or press the "ESC" button to cancel.
Selection of the language
Once this menu has been selected, you can change the language used by the display (Deutsch, English, Espanol, Français, Italiano, Nederlands, Portugues, Portugues-Brasil).
For safety reasons, it is imperative that configuration of the multifunction displays by the driver takes place when stationary.

2
38
COLOUR SCREEN DT
General menu
Press the "MENU" button on the RT3 audio/telephone to access the general menu and select one of the following applications:
- navigation - guidance,- audio functions,- trip computer,- directory,- telematics,- configuration,- map,- video.For further details regarding these functions, refer to the corresponding section.
Presentation
This displays the following informa-tion, via the RT3 audio/telephone control panel:
- the time,- the date,- the outside temperature (if there is a risk of ice, you are warned by a message),- the audio source displays (radio, CD, ...),- the telematic system displays (tel-ephone, services, ...),- the status of the accesses (doors, boot, ...),- the warning messages (e.g.: "Fuel level low") and vehicle function status messages (e.g.: "Automatic headlamp lighting activated") dis-played temporarily,- the trip computer display,- the satellite navigation system dis-plays.
In order to enable you to use all of your system's functions, you have two CD-Roms:
- one, "Configuration", contains the software and the various display languages and spoken informa-tion,- the other, "Navigation", contains the satellite navigation system map data.

2
39
"Configuration" menu
This provides access to successive confirmation windows.
Define the vehicle parameters
This enables you to activate or deac-tivate certain driving and comfort functions:
- wiper linked with reverse gear,- "follow-me-home" lighting and duration.
Example: "Automatic switching on of the lights"
Display configuration
The "Display configuration" menu provides access to the following parameters:
• "Select the colours": selection from the palette of colours available for the display,• "Brightness and intensity": setting of the brightness and intensity of the display,• "Sound": setting of the voice syn-thesiser (for the male/female voice parameter: insert the configuration CD-Rom); setting of the voice com-mands; activation of the auxiliary input AUX,• "International parameters": setting of the date and time (12 or 24 hour mode, adjustment of the minutes on GPS); selection of the units (l/100 - °C or mpg - °F),• "Selection of the language": selec-tion of the language of the dis-play, information and voice com-mands (Français, English, Italiano, Portugues, Espanol, Deutsch, Nederlands: insert the configura-tion CD-rom ).

2
40
For safety reasons, it is imperative that configuration of the multifunction displays by the driver takes placewhen stationary.
A FEW DEFINITIONS...
Superimposed display
This is a window which appears tem-porarily over the current application to announce a change of status of another application.
Permanent application
This is the main application currently in use, displayed as the main screen window.
Contextual menu
This is a menu, limited to the main functions of the main application currently in use, displayed as the main screen window.
"Video" menu
You can connect video equipment (camcorder, digital camera, DVD player, ...) to the three audio/video sockets, located in the glove box.
Videos can only be displayed when stationary.
Select the "Video" menu from the general menu:
- "Activate video mode" to activate/deactivate the video,- "Video parameters" to set the dis-play format, the brightness, the contrast and the colours.Pressing the "MODE" or "DARK"button disconnects the display from the video.
Successive presses on the "SOURCE" button permit the selec-tion of an audio source other than that of the video.

3
42

3
43
VENTILATION
1. Windscreen de-icing or demisting vent.
2. Side window de-icing or demisting vents.
3. Side vents.
4. Central vents.
5. Air outlets to the front footwells.
6. Air outlets to the rear footwells.
7. Temperature sensor.
Recommendations for use
If the interior temperature remains very high following a long period parked in the sun, do not hesitate to ventilate the passenger compartment for a few minutes.
For an even air distribution, make sure that you do not block the out-side air inlet grille, the vents and the air outlets to the footwells.
In certain cases of particularly ardu-ous use (towing the maximum load on a steep gradient in a high temper-ature), cutting off the air conditioning permits recovery of the engine power and therefore improvement of the towing capacity.
Ensure that the passenger compart-ment filter, located underneath the windscreen, in the engine compart-ment, is in good condition. Have the filter elements replaced regularly. If you drive in a dusty environment, change them twice as often.
Operate the air conditioning system for 5 to 10 minutes, once or twice a month, to keep it in perfect working order.
To guarantee correct operation of your air conditioning system, we also recommend that you have it checked regularly.
The condensation created by the air conditioning results in a flow of water underneath the vehicle when station-ary which is perfectly normal.
If the system does not produce cold air, do not use it and contact your PEUGEOT dealer.
Do not cover the temperature sensor 7, it is used for regulation of the air conditioning.
The air conditioning system does not contain chlorine and does not present any danger to the ozone layer.

3
44
Turn the control from blue (cold) to red (hot) to adjust the temperature to your requirements.
Turn the control from posi-tion 1 to position 4 to obtain a flow of air sufficient to ensure your comfort.
To maintain a certain level of comfort in the passenger compart-ment, avoid position 0 as much as possible.
However, in position 0, a slight flow of air, due to the movement of the vehicle, can still be felt.
HEATING/VENTILATION
The heating and ventilation can only operate when the engine is running.
1. Temperature adjustment
2. Air flow adjustment
Version with button and indicator light
Version with manual control