fog light PEUGEOT 1007 2008 Owners Manual

1
18
PETROL MANUAL GEARBOX AND "2 TRONIC" GEARBOX INSTRUMENT PANELS

1. Trip distance recorder zero
reset and total/trip distance
recorder display button.

2. Emission control system
warning light.

3. Service warning light.

4. Anti-lock braking system (ABS)
warning light.

5. Electronic stability control
(ESP/ASR) warning light.

6. Handbrake, brake fl uid level
and electronic brake force
distribution warning light.
7. Maximum coolant temperature
warning light.

8. Engine oil pressure warning light.

9. Punctured wheel warning light.

10. Battery charge warning light.

11. Left direction indicator.

12. Fuel gauge.

13. Low fuel level warning light.

14. Central STOP warning light.

15. Speedometer.
16. Speed limiter/cruise control
indicator light.

17. Service indicator, engine oil
level gauge and total/trip
distance recorder.

18. "2 Tronic" gearbox indicator.

19. Foot on brake warning light
("2 Tronic" gearbox).

20. Rev counter.

21. Right direction indicator.

22. Dipped headlamps indicator light.

23. Main beam headlamps indicator
light.

24. Front fog lamps indicator light.

25. Rear fog lamp indicator light.

26. Door open warning light.

27. Seat belt not fastened warning
light.

28. Passenger air bag disarmed
warning light.

29. Front, steering column, side and
curtain air bags warning light.

30. Lighting rheostat button.

1
19
DIESEL MANUAL GEARBOX INSTRUMENT PANEL

1. Trip distance recorder zero
reset and total/trip distance
recorder display button.

2. Emission control system
warning light.

3. Service warning light.

4. Anti-lock braking system (ABS)
warning light.

5. Electronic stability control
(ESP/ASR) warning light.

6. Handbrake, brake fl uid level
and electronic brake force
distribution warning light.
7. Maximum coolant temperature
warning light.

8. Engine oil pressure warning light.

9. Punctured wheel warning light.

10. Battery charge warning light.

11. Left direction indicator.

12. Fuel gauge.

13. Low fuel level warning light.

14. Central STOP warning light.

15. Speedometer.
16. Diesel engine pre-heat warning
light.

17. Water in diesel fi lter warning
light.

18. Speed limiter/cruise control
indicator light.

19. Service indicator, engine oil
level gauge and total/trip
distance recorder.

20. Rev counter.

21. Right direction indicator.

22. Dipped headlamps indicator light.

23. Main beam headlamps indicator
light.

24. Front fog lamps indicator light.

25. Rear fog lamp indicator light.

26. Door open warning light.

27. Seat belt not fastened warning
light.

28. Passenger air bag disarmed
warning light.

29. Front, steering column, side and
curtain air bags warning light.

30. Lighting rheostat button.

5
86
LIGHTS STALK
Lights off Automatic switching on
of lights.
Side lights Dipped/main beam
headlamps Dipped/Main beam change
Pull the stalk fully towards you.
Front fog lamps and rear fog
lamp
Rotate the ring
B or C forwards to
switch on and backwards to switch
off. The status is displayed by the in-
dicator light on the instrument panel.
Vehicles fi tted with a rear fog
lamp (ring B)
Rear fog lamp
Vehicles fi tted with front fog
lamps and a rear fog lamp (ring C) Front fog lamps (1st rotation
of the ring forwards)
These operate with the side lights
and dipped headlamps.
Lights on
With the ignition off, a buzzer sounds
when the driver’s door is opened, if
you have left your lights on.
If the dipped headlamps remain
on, with the ignition off, they will be
switched off automatically after thirty
minutes maximum to prevent dis-
charging of the battery.
This can only operate with the dipped
and main beam headlamps.
Front and rear lights
Selection is by turning ring
A .

5
87
Front fog lamps and rear
fog lamp (2nd rotation of
the ring forwards)

Note : to switch off the rear fog lamp
and the front fog lamps, turn the ring
backwards twice in succession.
Notes:
When the main beam headlamps are
switched on, the front fog lamps are
switched off.
When the lights are switched off au-
tomatically, with the engine running,
the front fog lamps and the side lights
will remain on (turn the ring back-
wards to switch the fog lamps off).
Direction indicators (fl ashers)

Left: downwards.

Right: upwards.
When the lights are switched
off automatically or when
the dipped headlamps are
switched off manually, with
the engine running, the fog
lamps and the side lights will
remain on.
In good or rainy weather, both day
and night, the front fog lamps and
the rear fog lamp are dazzling and
are prohibited.
Do not forget to switch them off when
they are no longer needed. Follow me home lighting
Leaving the dipped headlamps on
temporarily, after switching off the ig-
nition, facilitates the driver’s exit from
the vehicle when the light is poor.
Switching on

 With the ignition off, "fl ash" the
headlamps.

 A second "headlamp fl ash"
switches the function off.
Switching off
The follow me home lighting is
switched off automatically following
locking of the doors, after a specifi ed
time.

9
122
Rear lights

1. Brake/side lights
(P21 W/5 W).

2. Direction indicators
(P21 W).

3. Reversing light
(P21 W), left side.
Fog lamp (P21 W), right side.
These 4 bulbs are changed by re-
moving the light:

 Remove the access fl ap in the
corresponding boot side trim to
access the light,

 Remove the two light fi xing nuts
inside the boot,

 Unclip the harness,

 Remove the light pressing on the
retaining tabs,

 Remove the seal,
 Remove the bulb holder moving
aside the two tabs A ,

 Turn the bulb a quarter of a turn,

 Remove the bulb and change it.

Note: if necessary, use the wheel-
brace to remove the nuts.
When refi tting, proceed in the re-
verse order and take care to position
the bulb holder, the seal and the light
correctly. Third brake light
(4 W 5 W bulbs)

 Using a 10 mm box spanner, un-
screw the 2 fi xing nuts A .

 Release the lamp unit by push-
ing it outwards.

 Disconnect the connector and
the rear wash-wipe pipe.

 Turn the bulb holder a quarter of
a turn and remove it.

 Remove the bulb and change it.
When refi tting, proceed in the reverse
order and ensure that the lamp unit
seal and the rear wash-wipe pipe have
been put back in place correctly.
Do not tighten the nuts more than is
necessary at the risk of breaking the
light.
Number plate lights (W 5 W)

 Insert a thin screwdriver into one
of the external holes of the lens.

 Push it outwards to unclip it.

 Remove the lens.

 Remove the bulb and change it.