PEUGEOT 1007 DAG 2005 Workshop Manual

52 -Audio equipment and telematics
01-10-2005
53
-Audio equipment and telematics
01-10-2005
RDS SYSTEM
Using the RDS (Radio Data
System) function on FM
Most FM radio stations use the RDS
system.
This system allows you to continue
listening to the same station, whatever
frequency it is using for the region you
are going through.
This screen indicates
the name of the sta-
tion selected. The
audio/telephone con-
tinuously searches for the transmitter
which transmits the same programme
with the best reception. This search
may cause slight interference with the
transmission.
The function can be switched on or
off via the "RDS" button or the "AU-
DIO FUNCTIONS" main menu.
The screen will show:
- "RDS" if the function is active and
available for the station selected.
- "RDS" crossed out or "RDS"
greyed out on the screen* if the
function is active but is not avail-
able on the station.
If the station to which you are listen-
ing does not have several frequen-
cies in the region through which you
are travelling, you can switch off the
automatic frequency following. Trafic information programme
Press the ''TA/PTY''
button to switch the
function on or off.
The multi-function
screen will show:- TA if the function is selected,
- TA crossed out or greyed out*
if the function is selected but not
available.
Any trafic information lash will be
given priority, whatever source you
are listening to (radio, CD or CD
changer).
If you wish to interrupt the broadcast-
ing of a message, press the ''TA/
PTY'' button.
Notes: the volume of the trafic
information is independent of the
volume of normal audio/telephone
listening.
You can adjust it by using the volume
button. The setting will be stored and
will be used when the next messages
are broadcast.
You must be on the FM waveband.
During station search or automatic
storing phases, if the "TA" function
is selected, transmitters which are
compatible with the broadcasting of
these messages will be tuned to or
stored irst.
The station being listened to must
indicate via the RDS system that it
broadcasts trafic information. Stations which are organised in a
network (EON) have regional trans-
mitters which broadcast their own
programmes: you can listen to one
of these stations and switch to the
network station which broadcasts the
trafic information messages.
RDS station following Regional following mode (REG)
When they are part of a network,
certain stations broadcast regional
programmes in the various areas
they serve. With regional following
mode you can keep listening to the
same programme.
You can choose to follow:
• Either a regional station only.
• Or the entire network, with the pos-
sibility of listening to a different
programme.
The function can be switched on or
off via the "AUDIO FUNCTIONS "
main menu or by pressing the "RDS"
button for more than 2 seconds.
The multi-function screen will show:
- REG if the function is active,
- REG crossed out or greyed out*
if the function is active but not avail-
able.
* According to screen

54 -Audio equipment and telematics
01-10-2005
55
-Audio equipment and telematics
01-10-2005
PTY function
This allows you to listen to stations
broadcasting a speciic type of pro-
gramme, selected from the list of
available types below:
NEWS SCIENCE
AFFAIRS VARIED
INFO POP M
SPORT ROCK M
EDUCATE EASY M
FICTION LIGHT M
CULTURE OTHER M
WEATHER LEISURE
FINANCE JAZZ
CHILDREN COUNTRY
SOCIAL NATIONAL M
RELIGION OLDIES
PHONE IN FOLK M
TRAVEL DOCUMENT
When FM is selected, press button
"TA/PTY"
for more than two seconds
to switch the function on or off. To ind a
PTY programme:
- select the PTY button,
- turn button G to scroll down the
different types of programmes of-
fered, then conirm your choice,
when the programme of your choice
is displayed press button M or N to
carry out an automatic search (after
an automatic search the PTY func-
tion is switched off if no station has
been found).
In PTY mode the different types of
programmes can be stored in the
memory. To do this, press the prese-
lection buttons "1" to "6'' for more
than two seconds. To recall the type
of programme stored in the memory,
briely press the corrresponding but-
ton. EON system
This system connects stations which
are part of the same network. It
enables the broadcast of trafic in-
formation or a
PTY programme, by
a station that is part of the same
network as the station to which you
are listening.
The service is available when you
have selected the TA trafic informa-
tion programme or the PTY function.
Audio functions menu
Select the "Audio functions" menu
from the general menu to:
- "Activate/Deactivate RDS fre-
quency following",
- "Activate/Deactivate regional
mode" ,
- "Activate/deactivate Radio Text
display" , broadcast by the radio
station if available ("RT" is displayed
at the bottom of the screen).
- "Activate/deactivate CD details
display" , also permits MP3 dis-
play.

54 -Audio equipment and telematics
01-10-2005
55
-Audio equipment and telematics
01-10-2005
Contextual menu
By pressing knob
G, the contextual
menu allows you to access the fol-
lowing functions:
- "Inputting a frequency" ,
- "List of stations" to access the
30 stations picked up locally di-
rectly,
- "Refresh list" to update this list,
- "Display Radio Text" broadcast
by the radio station if it is available
("RT" is displayed at the bottom of
the screen).
When you are in radio mode, press-
ing knob G enables you to call up
the Radio contextual menu to select
"Read Radio Text" (information
broadcast by the station concern-
ing the programme to which you are
listening) (example: name of singer,
title of the song...).COMPACT DISC
Selecting CD mode
After inserting a disc, printed face
upwards, the CD drive starts auto-
matically.
If a disc has already been inserted,
press the ''SOURCE'' button to se-
lect CD mode. Selecting a track
Press button
M to select the follow-
ing track.
Press button N to return to the start
of the current track or to select the
previous track.
Press several times in succession to
skip several tracks.
Press button B to
eject the disc from the
drive.
If the CD is not re-
moved within 10 to 15 seconds fol-
lowing ejection, it is re-inserted into
the drive automatically but is not
played.
Ejecting a disc Accelerated play
Press and hold button M or N for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Notes:
• Before inserting a CD, press button
B to check that the drive does not
already contain a CD.
• When the navigation CD is in the drive, it is not possible to listen to a
CD in CD mode .

54 -Audio equipment and telematics
01-10-2005
55
-Audio equipment and telematics
01-10-2005
Contextual menu
By pressing knob
G, the contextual
menu allows you to access the fol-
lowing functions:
- "Inputting a frequency" ,
- "List of stations" to access the
30 stations picked up locally di-
rectly,
- "Refresh list" to update this list,
- "Display Radio Text" broadcast
by the radio station if it is available
("RT" is displayed at the bottom of
the screen).
When you are in radio mode, press-
ing knob G enables you to call up
the Radio contextual menu to select
"Read Radio Text" (information
broadcast by the station concern-
ing the programme to which you are
listening) (example: name of singer,
title of the song...).COMPACT DISC
Selecting CD mode
After inserting a disc, printed face
upwards, the CD drive starts auto-
matically.
If a disc has already been inserted,
press the ''SOURCE'' button to se-
lect CD mode. Selecting a track
Press button
M to select the follow-
ing track.
Press button N to return to the start
of the current track or to select the
previous track.
Press several times in succession to
skip several tracks.
Press button B to
eject the disc from the
drive.
If the CD is not re-
moved within 10 to 15 seconds fol-
lowing ejection, it is re-inserted into
the drive automatically but is not
played.
Ejecting a disc Accelerated play
Press and hold button M or N for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Notes:
• Before inserting a CD, press button
B to check that the drive does not
already contain a CD.
• When the navigation CD is in the drive, it is not possible to listen to a
CD in CD mode .

56 -Audio equipment and telematics
01-10-2005
57
-Audio equipment and telematics
01-10-2005
Contextual menu
By pressing knob
G, the contextual
menu permits you to switch the fol-
lowing functions on or off:
- playing of the start of a track ("Intro- scan"),
- random play ("Random"),
- programming of the track playing order,
- list of tracks.
Do not use copied CDs as
these could damage your
player.
Insert circular compact
discs only.Playing MP3 CDs
Following the insertion of an MP3
CD, playing of the irst song of the
irst MP3 directory begins. You can
select the track to be played using
buttons M or N or the MP3 directory
using buttons H or I.
Note: when the navigation CD is in
the drive, it is not possible to listen to
an MP3 CD in CD mode . MP3 contextual menu
Selecting a track
To display the list of MP3 directories,
press the MODE button to enter MP3
mode. When the knob G is pressed,
the contextual menu permits display-
ing of the "list of tracks" . In MP3 mode, pressing the knob
G
enables you to switch the following
functions on or off:
- Playing of the start of each track on the CD ("Introscan").
- Random play ("Random").
- Repeating of the tracks in the cur- rent MP3 directory.
- List of MP3 tracks.
This equipment enables you to listen
to music which is usually protected
by copyright in accordance with cur-
rent national and international regu-
lations.
Please refer to these regulations and
comply with them.
The playing and displaying of an
MP3 compilation may depend on the
recording programme and/or the pa-
rameters used.
We recommend use of the ISO 9660
recording standard.
Using buttons H or I,
select the MP3 direc-
tory to be played.
To open an MP3 di-
rectory, press knob G.
Using buttons M or N, se-
lect the track to be played.
Conirm by pressing knob G.

56 -Audio equipment and telematics
01-10-2005
57
-Audio equipment and telematics
01-10-2005
COMPACT DISC CHANGER
Selecting CD changer mode
Press the
''SOURCE'' button several
times. Selecting a track
Press button
M to select the follow-
ing track.
Press button N to return to the start
of the current track or to select the
previous track.
Press several times in succession to
skip several tracks. Contextual menu
By pressing knob
G, the contextual
menu permits you to switch the fol-
lowing functions on or off:
- playing of the start of the track ("In- troscan"),
- random play ("Random"),
- programming of the track playing order,
- list of tracks.
Selecting a disc
Press one of the buttons ''1'' to ''5''
on the audio/telephone to select the
appropriate disc. Accelerated play
Press and hold button
M or N for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Buttons H and I allow
you to select respec-
tively the previous or
following disc in the
changer.
Playing of the irst
track on the disc be-
gins automatically.
Following each change
of source, on returning
to CD changer mode, play will resume
where it stopped.

58 -Audio equipment and telematics
01-10-2005
59
-Audio equipment and telematics
01-10-2005
TELEPHONE
This function is a GSM dual-band tele-
phone (900 and 1 800 MHz) incorpo-
rated in the RT3 GPS audio/telephone
system.
It is a
''hands free'' telephone. This
function is provided by a microphone
located next to the front courtesy
light, the speakers, a steering col-
umn control and voice commands
which allow access to most of the
functions (the audio/telephone con-
trol panel buttons allow access to all
the functions).
Display of the principal ''mobile''
type functions, as well as consulta-
tion of the indexes, is provided by the
multi-function display.
This function is active, whatever
position the ignition key is in even af-
ter thirty minutes, when the message
''Economy mode active'' appears
on the multi-function display. "Telephone and telematic
services" menu
Press the
MENU button then, using
the knob G, select the "Telephone
and telematic services" application
and conirm to gain access to the fol-
lowing options:
- "Call" .
- "Service" , permits access to the
PEUGEOT services.
- "Telephone functions" , permits
setting of all of the telephone func-
tions.
- "Text messages (SMS)" , permits
management of all of the functions
for the text messages (SMS). Contextual menu
Press button
D to display the tele-
phone contextual menu.
This menu enables you to gain ac-
cess to the following functions:
- "List of calls" .
- "Enter number" .
- "Access to directory" .
- "Access to your voice mail" (mes-
sage service of your GSM operator).
Note:
Do not allow yourself to become
distracted when you are behind
the wheel and comply with current
national legislation. The driver is
advised to stop in order to hold a
telephone conversation or carry out
certain actions (manual dialling of a
number, for example).

58 -Audio equipment and telematics
01-10-2005
59
-Audio equipment and telematics
01-10-2005
Within each menu:
Move around and se-
lect a function by turn-
ing the G button then
validate by pressing
the button. Using the alphanumeric keypad
For a given button, to input a charac-
ter in the second or subsequent rows
press until you obtain the character
required.
Buttons Associated characters
[1]
1 or space
[2] 2 or A B C 2 or a b c 2
[3] 3 or D E F 3 or d e f 3
[4] 4 or G H I 4 or g h i 4
[5] 5 or J K L 5 or j k l 5
[6] 6 or M N O 6 or m n o 6
[7] 7 or P Q R S 7 or p q r s 7
[8] 8 or T U V 8 or t u v 8
[9] 9 or W X Y Z 9 or w x y z 9
[0] 0 or + (long press)
[#] # or validation
[*] * or erasing of last character
input (long press)
Cancel an operation using the ''ESC''
button.
Using the menus, example
"Telephone functions"
Press the
''MENU'' button to display
the general menu . Select the "Tele-
phone and telematic services"
application, validate "Telephone
functions" to access the principal
telephone functions, then the vari-
ous menus, in order to reach the one
required.
This menu allows you to access the
following functions:
- "Network": allows you to select
the network search mode and to
see the networks available.
- "Duration of calls": allows you
to consult the duration recorder of
calls made and zero re-set.
- "Process the PIN code": allows
you to use or modify the PIN code.
- "Call options": allows you to con-
igure the calls with entering of my
number, automatic answering after
X rings, speciication of ring options
and allows you to conigure the
diversion number for the text mes-
sages and clear the list of calls and
the text messages.

60 -Audio equipment and telematics
01-10-2005
61
-Audio equipment and telematics
01-10-2005
Installing the SIM card
Open lap
L by pressing the point of a
pencil on the circular opening above
the lap.
Insert your SIM card, available from
a mobile telephone operator, as in-
dicated in the graphics, then close
the lap.
Note: removal or insertion of the SIM
card must only be carried out after
the RT3 audio/telephone has been
switched off (key in position S (igni-
tion switch) and screen off).
If you have a duplicate card, when
carrying out the irst installation or to
update your directory you must insert
your mobile telephone's SIM card
then transfer its information to the
RT3 audio/telephone directory - refer
to the Directory main menu. Input your PIN code using the al-
phanumeric keypad and validate by
pressing button
G or button # to ac-
cess the network. Connection to the
network is validated by the appear-
ance of a symbol on the screen.
Warning: if you make three errors in
succession when inputting your PIN
code, your SIM card will be blocked.
To unblock it, you will need to input
the PUK code. The PUK code will be
supplied to you by the person sell-
ing your SIM card (input of the PUK
code allows for 10 errors in succes-
sion; after this the SIM card becomes
permanently unusable).
Note: the PIN code is required each
time the ignition is switched on, un-
less the PIN code has been stored
in the memory or protection by PIN
code is not activated on the SIM
card.
Inputting the PIN codeCancelling of PIN code request
In the menu ''Telephone functions''
select ''Process the PIN code'' , then
validate the ''Cancel'' function.
Warning: in this case, do not lose
your SIM card. Losing it would mean
anyone who inds it would be able to
make unlimited calls.

60 -Audio equipment and telematics
01-10-2005
61
-
Audio equipment and telematics
01-10-2005
Telephone function screens
Not in use
This screen indicates the presence
of voice messages or text mes-
sages (SMS) not listened to/read,
the cumulative time in use since the
last zero reset and the status of your
telephone.
In use
This screen indicates the time
elapsed since the start of the con-
versation, as well as the number* or
name of the person to whom you are
speaking (if recorded in the index)
and the status of your telephone.
* If this option and service are avail-
able.
Making a call
Press button D to display the contex-
tual menu of the telephone.
Entering a number
Select the function "Call"
then ''Enter number''
then enter the number
of the person you wish to
speak to using the alpha-
numeric keypad.
Press button D to make the call.Making a call from a directory
Select the "Call" function then "Di-
rectory" to access all the iles con-
taining a telephone number or the
"List of calls" function to access the
list of the last twenty incoming (if the
number display option is active) or
outgoing calls.
Note: there are two directories, the
RT3 audio/telephone directory and
the SIM card directory.
Receiving a call
When a ringing sounds to
let you know that a call is
waiting, you can choose
either to accept it by
pressing button D or the
end of the steering wheel
remote control or not to accept it by
pressing the button Q or by selecting
and validating the "NO" button on
the "Answer?" screen.
If you accept the call, to end your
communication, press button Q.
If you do not accept the call, it is
transferred to your voice mail or to a
call diversion number.