PEUGEOT 1007 DAG 2008 Owner's Guide

2
34
Display settings
Once the "Display settings" menu
has been selected, you can gain ac-
cess to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode. Languages

Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil, Deutsch, English, Espanol).
Units
Once the "Units" menu has been se-
lected, you can change the units of
the following parameters:
- temperature (°C or °F),
- fuel consumption (l/100, mpg or km/l).
Once you have selected a setting,
press the
"" or "" buttons to
change its value.
Press the
"" or "" buttons to
move to the previous or next setting
respectively.
Press the "OK" button to record the
change and return to the normal dis-
play or press the "ESC" button to
cancel. For safety reasons, it is im-
perative that confi guration of
the multifunction displays by
the driver takes place when
stationary.

2
35
MONOCHROME DISPLAY C (without WIP Sound)
General menu
Press the "MENU" button to access
the general menu:
- trip computer (see corresponding section),
- personalisation-confi guration.
Turn the navigator to select the menu
required, then confi rm by pressing
the navigator.
Presentation
It displays the following information:
- the time,
- the date,
- the exterior temperature (this fl ashes if there is a risk of ice),
- the accesses check (doors, boot, ...),
- the warning messages (e.g.: "Antipollution system
faulty") or information messages
(e.g.: "Automatic headlamp
lighting activated"), displayed
temporarily, can be cleared by
pressing the "ESC" button,
- the trip computer (see corresponding section), Parameter configuration
There are three buttons and a navi-
gator to enable you to control the
screen:
-
"MENU" to display the general
menu,
- "MODE" to change the
permanent application (trip
computer, date,...),
- "ESC" to abandon the operation
in progress,
- Rotation of the navigator:
movement on the display or
changing of a setting,
- Press on the navigator:
confi rmation of the selection. "Personalisation-
Configuration" menu
Once this menu has been selected,
you can access the following func-
tions:
- defi ne the vehicle parameters,
- display confi guration,
- selection of the language.

2
36
Defi ne the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the fol-
lowing equipment:
- wiper linked with reverse gear,
- "follow-me-home" lighting and duration.
Example: "Duration of the "follow-
me-home" lighting" Display confi guration
Once this menu has been selected,
you can access the following set-
tings:
- brightness-video setting,
- date and time setting,
- selection of the units.
Once you have selected a setting,
press the navigator.
Turn the navigator to change its value.
Press the navigator to record the
change and move on to the next set-
ting or press the
"ESC" button to
cancel. Selection of the language
Once this menu has been selected,
you can change the language
used on the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
For safety reasons, it is im-
perative that confi guration of
the multifunction displays by
the driver takes place when
stationary.

2
37
MONOCHROME SCREEN C
"Audio functions" menu
With the WIP Sound switched on,
once this menu has been selected,
you can activate or deactivate the
functions linked with the use of the
radio (RDS, REG, RadioText), the
CD or the CD changer (introscan,
random play, CD repeat).
Presentation
This displays the following infor-
mation, via the WIP Sound control
keypad:
- the time,
- the date,
- the outside temperature (this fl ashes if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Antipollution system
faulty") or information messages
(e.g.: "Automatic headlamp
lighting activated"), displayed
temporarily, can be cleared by
pressing the "ESC" button,
- the trip computer (see corresponding section). General menu
Press the
"MENU" button to gain ac-
cess to the general menu:
- audio functions,
- trip computer (see corresponding section),
- personalisation-confi guration,
- telephone (hands-free kit).
Press the
"" or "" buttons to se-
lect the menu required, then confi rm
by pressing the "OK" button.
"Personalisation-
Configuration" menu
Once this menu has been selected,
you can gain access to the following
functions:
- defi ne the vehicle parameters,
- display confi guration,
- selection of the language.

2
38
Defi ne the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the fol-
lowing equipment:
- wiper linked with reverse gear,
- "follow-me-home lighting" and duration.
Example: "Duration of follow-me-
home lighting" Display confi guration
Once this menu has been selected,
you can gain access to the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
When you have selected a setting,
press the
"OK" button, then press
the
"" or "" buttons to change
its value.
Press the "OK" button to record the
change and move on to the next set-
ting or press the "ESC" button to
cancel. Selection of the language
Once this menu has been selected,
you can change the language
used by the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
For safety reasons, it is im-
perative that confi guration of
the multifunction displays by
the driver takes place when
stationary.

2
39
COLOUR SCREEN
Displays on the screen
When the ignition is switched on, this
displays the following information au-
tomatically and directly:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned
by a message).
Warning messages (e.g.: "Fuel lev-
el low") and vehicle function status
messages (e.g.: "Automatic switch-
ing on of the headlamps activated")
may appear temporarily. These can
be cleared by pressing the "ESC"
button. General menu
When the WIP Com is switched on,
select the menu which corresponds
to the following applications:
- the satellite navigation system,
- the guidance on the map,
- the traffi c information,
- the audio sources (radio, CD,
Jukebox, ...),
- the telephone directories and functions,
- the confi guration of the screen and the setting of the
parameters of the vehicle's
equipment,
- the displaying of a video.
- the vehicle diagnostics (warnings log and status of the
functions). Controls
From the WIP Com control panel, to
select one of the applications:

 press the "MENU" button to
gain access to the general
menu ,

 turn the dial to move the
selection,

 press the dial to confi rm the
selection,
or

 press the "ESC" button to
abandon the operation in
progress and return to the
previous display.
For further details concerning these
applications, refer to the WIP Com
part of the "Audio and Telematics"
section.

2
40
Selection of the language
Once the "Selection of the language"
menu has been selected, you gain
access to the following parameters:
- selection of the display, information and voice
commands language (Français,
English, Italiano, Portugues,
Espanol, Deutsch, Nederlands).
Display confi guration
Once the "Display confi guration"
menu has been selected, you gain
access to the following parameters:
- selection of the palette of colours available for the display,
- setting of the brightness and brilliance of the display,
- setting of the date and time (12 or 24 hour mode,
adjustment of the minutes on
GPS),
- selection of the units (temperature in °Celsius or
°Fahrenheit; consumption in
l/100 km or mpg or km/l).
Sounds
Once the "Sounds" menu has been
selected, you gain access to the fol-
lowing parameters:
- setting of the voice commands,
- setting of the voice synthesiser (volume of the instructions
and other messages, male or
female),
- activation of the auxiliary input AUX. Defi ne the vehicle parameters
Once the "Defi ne the vehicle parame-
ters" menu has been selected, you can
activate or deactivate certain driving
and comfort equipment:
- wiper linked with reverse gear
(refer to the "Visibility" section),
- "follow-me-home" lighting and duration (refer to the "Visibility"
section).
"Configuration" menu

 Press the "MENU" button on
the WIP Com to gain access to
the general menu .

 Turn the dial to select the

"Confi guration" menu, then
press it to confi rm.
Once this menu has been selected,
you can gain access to the following
functions:

2
41

 Select the line "Duration of the
"follow-me-home" lighting" then
confi rm.
Example: setting the duration of the
"follow-me-home" lighting.

 Turn the dial to select the

"Lighting confi guration"
menu, then press it to confi rm.

 Select the duration then press
the dial.

 Turn the dial to set the value
required (15, 30 or 60 seconds),
then press the dial.

 Select the "OK" box, then
confi rm. The WIP Com must reini-
tialise and restart in order
to change the voice used by
the voice synthesiser (male
or female) or the language
used by the system.
For safety reasons, it is im-
perative that confi guration of
the multifunction displays by
the driver takes place when
stationary.

3
42

3
43
VENTILATION

1. Windscreen de-icing or
demisting vent.

2. Side window de-icing or
demisting vents.

3. Side vents.

4. Central vents.

5. Air outlets to the front footwells.

6. Air outlets to the rear footwells.

7. Temperature sensor. Recommendations for use
If the interior temperature remains
very high following a long period
parked in the sun, do not hesitate to
ventilate the passenger compartment
for a few minutes.
For an even air distribution, make
sure that you do not block the out-
side air inlet grille, the vents and the
air outlets to the footwells.
In certain cases of particularly arduous
use (towing the maximum load on a
steep gradient in a high temperature),
cutting off the air conditioning permits
recovery of the engine power and
therefore improvement of the towing
capacity.
Ensure that the passenger compart-
ment fi lter, located underneath the
windscreen, in the engine compart-
ment, is in good condition. Have the
fi lter elements replaced regularly (refer
to the chapter "Checks - § Checks").
If you drive in a dusty environment,
change them twice as often. We recommend the use of a com-
bined passenger compartment fi lter. By
means of its second special active fi lter,
it contributes to the purifi cation of the air
breathed by the occupants and to the
cleanness of the passenger compart-
ment (reduction of allergic symptoms,
unpleasant odours and oily deposits).
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.
To guarantee correct operation of
your air conditioning system, we also
recommend that you have it checked
regularly.

The condensation created by the air
conditioning results in a fl ow of water
underneath the vehicle when stationary
which is perfectly normal.
If the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer.
Do not cover the temperature sen-
sor
7 , it is used for regulation of the
air conditioning.
The air conditioning system
does not contain chlorine and
does not present any danger
to the ozone layer.