trip computer PEUGEOT 1007 DAG 2008 Owners Manual

Page 24 of 194

1
27
TRIP COMPUTER

 Press the button, located at the
end of the wipers stalk , to dis-
play the various items of trip
computer data in succession. The trip computer data is the
following:
System which provides current infor-
mation concerning the route travelled
(range, consumption, ...).

 Press the control for more than two
seconds to reset the distance trav-
elled, the average consumption
and the average speed to zero.
Monochrome display A
Zero reset
Data displays - the range,
- the current consumption,
- the distance travelled,
- the average consumption,
- the average speed.

 The next press then returns you
to the normal display.

Page 26 of 194

1
29
Distance remaining to be travelled
(km or miles)
This is the distance remaining to be travelled to the fi nal destination. It is either calculated instantly by the navigation system if guidance is acti-vated, or entered by the user.
If the distance is not entered, dashes are displayed in place of the digits.
Average speed
(km/h or mph)
This is the average speed cal-culated since the last trip com-puter zero reset (ignition on).
Range
(km or miles)
This indicates the number of miles (or kilometres) which can still be travelled with the fuel remaining in the tank in relation to the average consumption over the last few miles (kilometres) travelled.
Current consumption
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed over the last few seconds.
Average consumption
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed since the last trip compu-ter zero reset.
Distance travelled
(km or miles)
This indicates the distance travelled since the last trip computer zero reset.
A few definitions…
When the range falls below 20 miles (30 km), dashes are displayed. After fi lling with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).
If dashes are displayed con-tinuously while driving in place of the digits, contact a PEUGEOT dealer.
This function is only displayed from 20 mph (30km/h).
This fi gure may increase fol-lowing a change of driving style or relief, resulting in a signifi cant change in the cur-rent consumption.

Page 27 of 194

1
30
Display C
 Press the "MENU" button to gain access to the general menu.
 Press the arrows, then the "OK"button to select the "Trip com-puter" menu.
 On the "Trip computer" menu, select one of the following appli-cations:
Warnings log
This summarises the active warning messages, displaying them in suc-cession on the multifunction display.
Status of the functions
This summarises the active or inactive status of the functions present on the vehicle.
Enter the distance to the destination
This enables you to enter an approxi-mate value for the distance to the fi nal destination.
"TRIP COMPUTER" MENU
System which provides general infor-mation concerning the status of certain equipment with which your vehicle is equipped, such as the warnings log, the status of the functions...
"DIAGNOSTICS" MENU
 On the "Diagnostics" menu, select one of the following appli-cations:
Colour display
 Press the "MENU" button to gain access to the general menu.
 Turn the dial and press it to select the "Diagnostics" menu.

Page 170 of 194

163
22
11
Press the end of the lights stalk to start the voice
recognition.
Say the words one by one and wait for the audible
confi rmation signal between each word.
The list which follows is exhaustive.
VOICE COMMANDS
To display the list of available voice commands, p ress
the end of the lights stalk to start the voice reco gnition,
then say HELP or WHAT CAN I SAY.
For the same operation, press and
hold the MENU button and select the
function VOICE COMMANDS LIST.
VOICE COMMANDS LIST
DISPLAYING THE LIST AND USING THEM LEVEL 1 LEVEL 2 LEVEL 3
display audio guidance
navigation
trip computer
telephone
call description
changer disc number
previous/next disc
random play
list
track number
previous/next track
repeat
scan 1 ... 20
guide to description
traffi c info display
read
CD player/jukebox random play list
track number
previous/next track
directory (MP3 CD)
scan 1 ... 20
previous/next
repeat
navigation stop/resume
directory
show
zoom out/in destination
description
vehicle
radio autostore list
memory
previous/next 1 ... 6
SMS/message display
read
telephone voice mailbox last number
voice message service
directory description

Page 194 of 194

182
11
2
3
4
3
4
3
2
3
4
3
4
2
3
4
2
4
4
3
3
4
4
1
2
2
1
2
3
3
3
4
4
4
2
3
4
3
4
3
4
2
3
3
3
4
2
2
08
4
3
4
4
PERSONALISATION-CONFIGURATION
DISPLAY FLOW CHART monochrome C
* The parameters vary according to vehicle (refer to the "Multifunction displays" chapter).
** According to compatibility of Bluetooth telephone and service contract. TELEPHONE
AUDIO FUNCTIONS
PLAY MODES album repeat (RPT)
activate/deactivate
track random play (RDM)
activate/deactivate
TRIP COMPUTER MANAGEMENT OF A COMMUNICATION
switch **
terminate the current call
secret mode activate/deactivate
FM BAND PREFERENCES
alternative frequencies (RDS) activate/deactivate
regional mode (REG)
activate/deactivate
radio-text information (RDTXT)
activate/deactivate DISPLAY CONFIGURATION
video brightness adjustment normal video
inverse video
brightness (- +) adjustment
date and time adjustment
day/month/year adjustment hour/minute adjustment
choice of 12 h/24 h mode
choice of units
l/100 km - mpg - km/l
°Celsius/°Fahrenheit
ENTER DISTANCE TO DESTINATION
WARNING LOG
STATUS OF FUNCTIONS DEFINE THE VEHICLE PARAMETERS *
CHOICE OF LANGUAGE
CONSULTING DIRECTORIES **
telephone directory
call log
services directory customer contact centre
breakdown call
emergency call
CONFIGURATION
deletion of a match list of matches
consulting matches
list of matches
choice of a mobile to connect list of mobiles