headlamp PEUGEOT 107 2009 Owners Manual

Page 56 of 99

5
52
VISIBILITY
LIGHTING STALK S

1. Lamps off

2. Sidelamps

3. Dipped headlamps/
Main beam
headlamps Dipped headlamps/main beam
headlamps

Dipped headlamps: pull the stalk.

Main beam headlamps: push the
stalk.
Lamps on buzzer
When the driver's door is opened with
the ignition off, a continuous audible
signal is heard if you have left your
lamps on. Rear foglamp
With the dipped head-
lamps on, selection is
by rotation of ring B for-
wards to switch on and
rearwards to switch off.
The status is displayed by the indicator
lamp on the instrument panel.
In clear weather or in rain,
both day and night, the rear
foglamps are dazzling and
are prohibited.
Do not forget to switch them off when
they are no longer needed.
Direction indicators
(flashers)
Left: stalk downwards.

Right: stalk upwards.
Headlamp flash
Pull the stalk fully towards you.
Front and rear lamps
Selection is by rotation of ring
A .
Note: Switching to sidelamps does
not switch off the rear foglamps if
they are on.

Page 58 of 99

5
54
VISIBILITY
HEADLAMPADJUSTMENT
To avoid causing a nuisance to
other road users, the height of the
headlamps should be adjusted in
relation to the load in the vehicle.

0. 1 or 2 people in the front seats.

-. 3 people.

1. 4 people.

2. 4 people + maximum authorised
load.

3. Driver + maximum authorised load.
The initial setting is position "0" . In this position, it comes
on on opening the driver's
door.
The courtesy lamp is deacti-
vated and is permanently
off.
COURTESY LAMP
Permanently on.

Page 78 of 99

9
71
PRACTICAL INFORMATION
CHANGING A BULB
1. Sidelamps (W 5 W)

 Turn the bulb holder A one quarter
of a turn and remove it.

 Remove the bulb and change it.
2. Direction indicators (PY 21 W amber)

 Turn the bulb holder B one quarter
of a turn and remove it.

 Turn the bulb one quarter of a
turn.

 Remove the bulb and change it.
If you encounter any diffi culties,
contact a PEUGEOT dealer.

Note: in certain climatic con-
ditions (low temperatures,
humidity), the presence
of condensation on the
internal face of the headlamps is
normal ; it disappears a few minutes
after the lights are switched on.
Never go underneath a vehi-
cle supported only by a jack
(use an axle stand).

4. Fold the jack 2 and detach it.

5. Tighten the wheel bolts using the
wheelbrace 1 .

6. Refi t the trim.

7. Store the tools and the wheel in
the boot.
The jack and the tool kit are specifi c to
your vehicle. Do not use them for other
purposes.
After changing a wheel:
- have the tighteness of the bolts and the pressure of the spare wheel
checked as soon as possible,
- have the punctured wheel repaired and refi t it on the vehicle as soon
as possible.
Consult a PEUGEOT dealer. Front lamps

1. Sidelamps

2. Direction indicators

3. Dipped headlamps/Main beam
headlamps

Page 79 of 99

9
71
PRACTICAL INFORMATION
CHANGING A BULB
1. Sidelamps (W 5 W)

 Turn the bulb holder A one quarter
of a turn and remove it.

 Remove the bulb and change it.
2. Direction indicators (PY 21 W amber)

 Turn the bulb holder B one quarter
of a turn and remove it.

 Turn the bulb one quarter of a
turn.

 Remove the bulb and change it.
If you encounter any diffi culties,
contact a PEUGEOT dealer.

Note: in certain climatic con-
ditions (low temperatures,
humidity), the presence
of condensation on the
internal face of the headlamps is
normal ; it disappears a few minutes
after the lights are switched on.
Never go underneath a vehi-
cle supported only by a jack
(use an axle stand).

4. Fold the jack 2 and detach it.

5. Tighten the wheel bolts using the
wheelbrace 1 .

6. Refi t the trim.

7. Store the tools and the wheel in
the boot.
The jack and the tool kit are specifi c to
your vehicle. Do not use them for other
purposes.
After changing a wheel:
- have the tighteness of the bolts and the pressure of the spare wheel
checked as soon as possible,
- have the punctured wheel repaired and refi t it on the vehicle as soon
as possible.
Consult a PEUGEOT dealer. Front lamps

1. Sidelamps

2. Direction indicators

3. Dipped headlamps/Main beam
headlamps

Page 80 of 99

9
72
PRACTICAL INFORMATION
3. Dipped headlamps/Main beam headlamps (H4 - 60/55 W)

 Disconnect the connector.

 Remove the rubber cap C .

 Push the side of the tongue D .

 Remove the bulb holder and
change the bulb.

 Refi t the bulb holder, the tongue
then the rubber cap.
If you encounter any diffi culties,
contact a PEUGEOT dealer.
Rear lamps

1. Brake/side
lamps
(P 21/5 W)

2. Direction indicators (P 21 W)

3. Reversing
lamp (P 21 W),

left-hand side
Foglamp (P 21 W),
right-hand
side These 3 bulbs are changed by
removing the lamp unit:

 open the boot,

 unscrew the two lamp unit fi xing
nuts A ,

 remove the lamp unit by pulling
outwards,

 unclip the harness,

Page 81 of 99

9
72
PRACTICAL INFORMATION
3. Dipped headlamps/Main beam headlamps (H4 - 60/55 W)

 Disconnect the connector.

 Remove the rubber cap C .

 Push the side of the tongue D .

 Remove the bulb holder and
change the bulb.

 Refi t the bulb holder, the tongue
then the rubber cap.
If you encounter any diffi culties,
contact a PEUGEOT dealer.
Rear lamps

1. Brake/side
lamps
(P 21/5 W)

2. Direction indicators (P 21 W)

3. Reversing
lamp (P 21 W),

left-hand side
Foglamp (P 21 W),
right-hand
side These 3 bulbs are changed by
removing the lamp unit:

 open the boot,

 unscrew the two lamp unit fi xing
nuts A ,

 remove the lamp unit by pulling
outwards,

 unclip the harness,