reset Peugeot 107 Dag 2008 Owner's Manual

1
17
INSTRUMENTS and CONTROLS
INSTRUMENT PANEL

1. Total/trip distance recorder zero
reset button

2. Warning lights and indicators
display

3. Direction indicators

4. Speedometer

5. Fuel gauge
6. Total/trip distance recorder

7. Rear fog lamp indicator light

8. Main beam headlamps indicator
light

9. Dipped headlamps indicator light
REV COUNTER
When approaching the maximum
engine speed, when the rev counter
needle crosses into the red zone, you
must engage the next gear up.
10. "2 Tronic" gearbox gear and gear
lever positions indicator

1
20
INSTRUMENTS and CONTROLS
DISPLAY
To reset the trip recorder to zero,
when it is displayed, press and hold
button 1 . "2 Tronic" gearbox indicator
Lever in EASY mode
(automatic mode)

"E" is displayed when this
operating mode is selected.
It is switched off on switching to man-
ual mode.
Lever in manual mode

"M" is displayed when this
operating mode is selected.
It is switched off on switching
to EASY mode.

"Neutral"


"Reverse"

Total/trip distance recorder
When the ignition is switched on, the
distance recorder selected when the
engine was switched off is displayed.
Press button
1 to alternate the distance
display:
- total with "ODO" displayed,
- trip with "TRIP" displayed.

1
20
INSTRUMENTS and CONTROLS
DISPLAY
To reset the trip recorder to zero,
when it is displayed, press and hold
button 1 . "2 Tronic" gearbox indicator
Lever in EASY mode
(automatic mode)

"E" is displayed when this
operating mode is selected.
It is switched off on switching to man-
ual mode.
Lever in manual mode

"M" is displayed when this
operating mode is selected.
It is switched off on switching
to EASY mode.

"Neutral"


"Reverse"

Total/trip distance recorder
When the ignition is switched on, the
distance recorder selected when the
engine was switched off is displayed.
Press button
1 to alternate the distance
display:
- total with "ODO" displayed,
- trip with "TRIP" displayed.

3
36
COMFORT
FRONT SEATS
2. Seat back angle adjustment
Push control A rearwards while ad-
justing the angle of the seat back. 3. Access to the rear seats
(3-door)
Position the seat belt along the door
pillar.
Push control A rearwards to fold the
seat back and move the seat forwards.
To put the seat back in place, push
the seat back until the seat locks.
Reset the forwards-backwards ad-
justment of the seat and the seat
back angle.
1. Forwards-backwards adjustment
Raise the control and slide the seat
forwards or backwards.
No person or object must pre-
vent the seat from returning
to the required position.