PEUGEOT 2008 2014 Manual PDF

69
3
Comfort
 Press this button several times in succession to direct the air flow in turn towards:
 Press this button to recirculate the interior air. The indicator lamp in the button comes on and the air recirculation symbol is displayed.
 Press the "empty fan" air flow button until the fan symbol disappears and "---" appears.
 Press this "full fan" button to increase the air flow.
 Press this "empty fan" button to reduce the air flow.
Avoid prolonged operation in interior air recirculation mode (risk of misting and of deterioration of the air quality).
Avoid driving for too long with the system switched off (risk of misting and of deterioration of the air quality). Pressing the "full fan" button reactivates the system with the settings prior to deactivation.
Air distribution adjustment
- the windscreen, the side windows and the footwells, - the windscreen and side windows (demisting or defrosting), - the central and side vents, - the central vents, the side vents and the footwells, - the footwells.
Air fl ow adjustment
The air flow symbol (a fan) appears in the screen. It is filled in progressively in relation to the value required.
Air intake/Air recirculation
Air recirculation prevents exterior odours and smoke from entering the passenger compartment. It is activated automatically when operating the screen wash.  As soon as possible, press this button again to permit the intake of exterior air and prevent misting. The indicator lamp in the button goes off.
Switching the system off
This action switches off all of the functions of the air conditioning system. The temperature is no longer maintained at a comfortable level. However, a slight flow of air, due to the movement of the vehicle, can still be felt.

70
Comfort
 Switch off the demisting/defrosting of the rear screen and door mirrors as soon as appropriate, as lower current consumption results in reduced fuel consumption.
Front demist - defrost
Rear screen
demist - defrost
The control button is located on the air conditioning system control panel.
These markings on the control panel indicate the control positions for rapid demisting or defrosting of the windscreen and side windows.
With manual air
conditioning
Switching on
The rear screen demisting/defrosting can only operate when the engine is running.  Press this button to demist /defrost the rear screen and (depending on version) the door mirrors. The indicator lamp associated with the button comes on.
With Stop & Start, when demisting has been activated, the STOP mode is not available.
Switching off
The demisting/defrosting switches off automatically to prevent an excessive consumption of current.  It is possible to stop the demisting/defrosting operation before it is switched off automatically by pressing the button again. The indicator lamp associated with the button goes off.
With dual-zone digital air
conditioning
Automatic visibility programme
 Select this programme to demist or defrost the windscreen and side windows as quickly as possible. The system automatically manages the air conditioning, air flow and air intake, and provides optimum distribution towards the windscreen and side windows.  To stop the programme, press either the "visibility" button again or "AUTO" , the warning lamp on the button goes off and the warning lamp in the "AUTO" button comes on.
The system reverts to the previous settings.
 Put the air flow, temperature and distribution controls to the dedicated marked position.  Press the "A /C " button for air conditioning; the indicator lamp in the button comes on.

71
3
Comfort
Interior fi ttings
1. Illuminated glove box (see details on the following page) 2. Open storage compartment (depending on equipment)3. 12 V accessory socket (120 W )
Observe the maximum power rating to avoid damaging your accessory. 4. USB por t / Auxiliar y socket / Auxiliar y socket (see details on following pages) 5. Open storage compartments6. Cup holder7. Closed storage compartment8. Door pockets

72
Comfort
12 V accessory
socket
Illuminated glove
box
It has dedicated locations for storing a water bottle, the vehicle's handbook pack... Its lid has locations for a pair of glasses...  To open the glove box, raise the handle. It is illuminated when the lid is opened (depending on version). It houses the front passenger airbag deactivation switch A . If the vehicle is fitted with air conditioning, it provides access to the ventilation nozzle B , distributing the same conditioned air as the vents in the passenger compartment.
 To connect a 12 V accessory (maximum power: 120 Watts), lift the cover and connect a suitable adaptor.

73
3
Comfort
Additional USB port
Depending on version, your vehicle may be fitted with a second USB port, located on the centre console. When in use, the USB por t / Jack auxiliar y socket must not be used to charge a por table device (risk of overload).
USB port / Jack auxiliary socket
This connection box, consisting of a JACK auxiliary socket and a USB port, is located on the centre console. It allows the connection of portable device, such as a digital audio player of the iPod ® type ® type ®
or a USB memory stick. It reads the audio files which are transmitted to your audio system and played via the vehicle's speakers. You can manage these files using the steering mounted controls or the audio system control panel and display them in the instrument panel screen.
When the USB port is used, the portable device charges automatically.
For more information on the use of this
system, refer to the "Audio equipment and telematics" section.

74
Comfort
Mats
To remove the mat on the driver's side:  move the seat as far back as possible,  unclip the fixings,  remove the mat.
Removal Refitting
To avoid any risk of jamming of the pedals: - only use mats which are suited to the fixings already present in the vehicle; these fixings must be used, - never fit one mat on top of another. The use of mats not approved by PEUGEOT may inter fere with access to the pedals and hinder the operation of the cruise control / speed limiter.
To refit the mat on the driver's side:  position the mat correctly,  refit the fixings by pressing,  check that the mat is secured correctly.
Removable carpet protection.

75
3
Comfort
B o o t fi t t i n g s
1. High load retaining net (depending on version) (see following page for details) 2. Luggage cover Luggage cover Luggage cover (see following page for details) 3. Boot lamp4. Retaining strap5. Stowing rings (depending on version)6. Retaining net

76
Comfort
Rear parcel shelf
This consists of two sections which can be folded back on each other. To store it, fold it on itself and place it at the bottom of the boot.
To gain access to the boot from the rear seats:  raise the front section of the rear parcel shelf using the grip A .
High load retaining net
Hooked onto the upper fixings and onto the lower rings or the lugs, this permits use of the entire loading volume up to the roof:
- behind the rear seats (row 2), - behind the front seats (row 1) when the rear seats are folded.
When positioning the net, check that the strap loops are visible from the
boot; this will make slackening or tightening easier.

77
3
Comfort
Never use the ISOFIX ring intended for fixing the upper strap of child seat to the Top Tether.
To use it in row 1:  open the covers of the upper fixings 1 ,  unroll the high load retaining net,  position one of the ends of the net's metal bar in the corresponding upper fixing 1 , then do the same with the other end,  slacken the straps fully,  fix the snap hook of each of the straps on the corresponding lug 3 , located under the bench seat cushion,  fold the rear seats,  tighten the straps without raising the
bench seat,  check that the net is hooked and tightened c o r r e c t l y.
To use it in row 2:  fold or remove the load space cover,  open the covers of the upper fixings 2 ,  unroll the high load retaining net,  position one of the ends of the net's metal bar in the corresponding upper fixing 2 , then do the same with the other end,  attach the hook of each of the net's straps in the corresponding lower ring 4 ,  tighten the straps,  check that the net is hooked and tightened c o r r e c t l y.

78
Comfort
Warning triangle (stowing)
Before leaving your vehicle to set up and install the triangle, put on your high visibility vest.
The dimensions of the triangle (once folded) or
its storage box must be: - A : length = 438 mm, - B : height = 56 mm, - C : width = 38 mm. To use the triangle, refer to the manufacturer's instructions.
Placing the triangle in the road
The location for stowing a folded triangle or its box is under the front seat or under the boot carpet (depending on version).
Distance from your vehicle (in metres)
Road
Motor way
DayNight
50 m 80 m 150 m
These are the internationally recognised values. Use the triangle in line with local driving regulations.
The triangle is available as an accessory, contact a PEUGEOT dealer or a qualified workshop.
 Place the triangle at a distance behind the vehicle, as shown in the table below, according to the type of road and the level of ambient light.