service indicator PEUGEOT 206 2008 Owners Manual

23
INSTRUMENTS and CONTROLS
-
Service indicator
This is a visual reminder of when the
next service is due. This service is to
be carried out according to the manu-
facturer’s servicing schedule.5 seconds after the ignition is
switched on, the total distance re
-
corder resumes normal operation and
the display shows the total or trip dis -
tances.
The distance remaining before
the next service is less than
500 miles (1.000 km).
Example: 400 miles (900 km) remain
before the next service is due.
When switching on the ignition and
for 5 seconds, the display shows:
INSTRUMENT PANEL
DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder, it remains displayed for 30 seconds after
the ignition is switched off.
It also displays the speed limiter/
cruise control information, when one
of these systems is active (see cor-
responding section).
Operation
As soon as the ignition is switched
on and for 5 seconds, the spanner
symbolising service operations is lit.
The trip recorder display shows the
distance remaining (in round igures)
before the next service.
Example: 400 miles (900 km) re-
main before the next service is due.
When switching on the ignition and
for 5 seconds, the display shows: The service is overdue.
Each time the ignition is switched on
and for 5 seconds, the spanner and
the excess distance lash.
Example:
the service is overdue by
300 miles/km. The service should be
carried out very shortly.
When the ignition is switched on and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance re -
corder resumes normal operation and
the spanner remains lit. The display
shows the total or trip distances.
5 seconds after the ignition is
switched on, the total distance re -
corder resumes normal operation and
the display shows the total or trip dis -
tances.
This indicates that a service should
be carried out shortly. The display
shows the total or trip distances.

INSTRUMENTS and CONTROLS
24 -
Resetting the service indicator
Your PEUGEOT dealer carries out
this operation after each service.
The reset procedure is as follows:
- Switch off the ignition.
- Press and hold button 1.
- Switch on the ignition.
The display begins a 10 second
countdown
- Keep button 1 pressed for
10 seconds.
The display shows [= 0] and the
spanner disappears. Engine oil level indicator
When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
service information.
Oil level gauge fault
Flashing of the six segments indi-
cates a malfunction of the oil level
gauge.
There is a risk of damage to the en-
gine.
Consult a PEUGEOT dealer.
Surplus of oil
Flashing of the six squares and dis-
playing of "max" indicate a surplus of
oil which could damage the engine.
If the surplus of oil is conirmed by
a check using the dipstick, contact a
PEUGEOT dealer without delay.
Lack of oil
Flashing of the six segments and dis-
playing of "min" indicate a lack of oil
which could damage the engine.
If the lack of oil is conirmed by a
check using the dipstick, it is essen -
tial that the level is topped up. The level read on the gauge will
only be correct if the vehicle is
on level ground and the engine
has been off for more than 15 mi-
nutes.