trip computer PEUGEOT 206 2008 Owners Manual

Page 25 of 127

27
MULTIFUNCTION DISPLAYS
-
Setting the parameters
Press button 1 for two seconds to
access the settings. The informa-
tion lashes to show it is ready to be
modiied.
Then, individual presses on button 1
allow you to scroll through the vari -
ous data in the following sequence:
- language in which the information is displayed,
- unit of distance (kms or miles),
- unit of temperature (degrees Celsius or Fahrenheit),
- time format (12 then 24 hour mode),
- hour,
- minutes,
- year,
- month,
- day.
Pressing button 2 allows you to
change the information selected.
Maintain the pressure for rapid
scrolling.
After 7 seconds without operation,
the screen returns to the normal
display and the modiied data is
recorded.MONOCHROME DISPLAY B
This enables the following informa -
tion to be displayed:
- the time,
- the date,
- the outside temperature (this lashes when there is a risk
of ice),
- the radio displays,
- the status of the doors. The display shows you, by means
of a graphic, whether a door is
open,
- the warning messages
(e.g. "battery charge fault")
or information messages
(e.g. "fuel level low"), displayed
temporarily, can be cleared by
pressing button 1 or 2,
- the trip computer.

Page 74 of 127

67
VISIBILITY
-
TRIP COMPUTER
Pressing the button on the end of the
wash/wipe stalk enables the following
data to be displayed:
Display B
- the range
- the distance travelled
- the average consumption
- the current consumption
- the average speed Zero reset
Press the stalk for more than two
seconds.
Range
This shows the distance that can still
be covered with the fuel remaining in
the tank.
Note:
this igure may increase if there
is a change in the style of driving or
the road surface, producing a signii -
cant drop in current consumption.
When the range is less than 20 miles
(30 km), three segments are dis -
played. After illing with fuel, the
range is displayed when it exceeds
60 miles (100 km).
If horizontal segments are displayed
for long periods instead of digits,
contact a PEUGEOT dealer. Distance travelled
This indicates the distance travelled
since the computer was last set to
zero.
Average consumption
This is the average fuel consumption
since the computer was last set to
zero. Current consumption
This is the average quantity of fuel con-
sumed during the last few seconds.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
Average speed
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).