Peugeot 206 CC 2006 Service Manual

40 -Audio equipment and telematics
01-01-2006
When the menus are used, the
functions which appear at the bottom
of the screen are presented in various
ways:
1. Function selected.
2. Function inaccessible in this
situation.
3. Function accessible.
Note: the "List" option is accessible
for a maximum of 80 possible
addresses. The control unit
The displayDuring guidance the screen displays
different information depending on
the manoeuvres to be carried out:
1. Distance to next manoeuvre.
2. Next manoeuvre to be carried
out.
3. Next road to take.
4. Time.
5. Exterior temperature.
6. Current road.
7. Distance to final destination.
8. Manoeuvre to be carried out. This is located in the glove box.
1.
CD-ROM eject button.
2. CD-ROM compartment.
3. ON indicator light indicates that
the control unit is supplied with
power.
4. CD indicator light shows that
there is a CD-ROM in the unit.
5. Remote control storage
compartment.

41
-Audio equipment and telematics
01-01-2006
Pressing the button on the end of
the lights stalk allows the last voice
message to be repeated, or, if
appropriate, a voice message to be
heard and a more detailed display
of the approaching landscape to be
displayed.
The last voice message recall
control
This contains all the mapping data.
It must be inserted with the printed
face upwards.
Use only CD-ROMs approved by
PEUGEOT.
The CD-ROM
The use of copied compact
discs may cause faults. The satellite navigation system is
active when the globe is lit with a full
outline.

42 -Audio equipment and telematics
01-01-2006
Main menu
Switch on the ignition.
Press the "Menu" button to access
the main menu.
Select a function using the direction
arrows, then confirm ( "VAL" button). Navigation / GuidanceFollowing selection of the
"Navigation/guidance"
menu, a
screen warns you about the use of
the navigation system. Follow the
regulations in force and do not use
the remote control while driving.
Press the "VAL" button to access
the next screen.The "Navigation/guidance" menu
offers the following options:
- entering of the address of a new destination;
- selection of a service (hotel, station, airport...) available in a town;
- selection of an address stored in one of the two directories;
- access to the "Navigation options"
menu.
- radio functions are suspended when the system is in guidance
mode.

42 -Audio equipment and telematics
01-01-2006
Main menu
Switch on the ignition.
Press the "Menu" button to access
the main menu.
Select a function using the direction
arrows, then confirm ( "VAL" button). Navigation / GuidanceFollowing selection of the
"Navigation/guidance"
menu, a
screen warns you about the use of
the navigation system. Follow the
regulations in force and do not use
the remote control while driving.
Press the "VAL" button to access
the next screen.The "Navigation/guidance" menu
offers the following options:
- entering of the address of a new destination;
- selection of a service (hotel, station, airport...) available in a town;
- selection of an address stored in one of the two directories;
- access to the "Navigation options"
menu.
- radio functions are suspended when the system is in guidance
mode.

43
-Audio equipment and telematics
01-01-2006
Entering a new destination
The last town entered is displayed.
To enter the name of another town,
select each letter using the direction
arrows then confirm (
"VAL" button)
for each letter.
If an error is made, the "Correct"
function enables the last letter
entered to be cleared.
The "List" function indicates, as the
name is entered, the number of towns
beginning with the same letters. If the
list contains less than 5 names, these
are displayed automatically. Select a
town then confirm ( "VAL" button).
The "Change" function enables
the town entered to be completely
cleared.
When the complete name of the town
is displayed, select the "Validate"
function then press the "VAL"
button.
Note: following confirmation of a
letter, only those letters which could
make up an existing name appear.Enter the name of the street. Select
the "Validate" function then press
the "VAL" button.
Note: the guidance can be activated
from the time the town is entered
without the name of a street or a
number. To do this, select the "City
centre" function.Enter the number on the street.
Select the "Validate" function then
press the "VAL" button.
Note: the guidance can be activated
as soon as the town and street are
entered without a number. To do this,
select the "Validate" function.

44 -Audio equipment and telematics
01-01-2006
The complete destination is displayed.
Select the "Validate" function then
press the "VAL" button.
Note: you can also change the
destination or store it in one of the
two directories (see the section on
storing an address in a directory).The last guidance criterion used is
displayed.
Guidance begins automatically,
retaining this criterion if there is no
action within 5 seconds or following
confirmation of the "NO" function.
Follow the instructions.
If you wish to change the guidance
criterion, select the "YES" function
then press the "VAL" button.Select a criterion from the list offered
then confirm ( "VAL" button). When
the criterion of your choice is selected,
select the "Validate" function then
press the "VAL" button. Guidance
begins, follow the instructions.

45
-Audio equipment and telematics
01-01-2006
Selecting a service
The last address entered is
displayed.
There are 3 options for defining the
location in which you wish to obtain
a service:
- resume the last address entered by
means of the "Validate" function.
- enter the name of a new town then enter the street (or the "City
centre" function) by means of the
"Change" function.
- automatically enter your current location by using the "Current
location" function.After confirming the address, select
a service by scrolling through the list
using the direction arrows then press
the "VAL" button.
A cursor on the left-hand side of the
screen indicates your position in the
list.The address of the required service
is displayed.
An indication on the right-hand
side of the screen (e.g. 1/50)
indicates whether there are any
other establishments (50 maximum)
offering the same service within a
radius of approximately 30 miles
(50 km).
Use the "Next" or "Previous"
functions to consult the list offered.
When the establishment of your
choice is displayed, select the
"Validate" function then press the
"VAL" button. Select a guidance
criterion. Guidance begins, follow the
instructions.

46 -Audio equipment and telematics
01-01-2006
Storing an address in a directory
When a new address is entered, you
can store it by selecting the "Store"
function.
Enter the description of the address.
If the description already exists for
a different address, you can replace
the old address with a new one.
Select the Personal or Professional
directory, then press the "VAL"
button. The address is then stored in
the directory of your choice (directory
capacity 100 addresses). Selecting a stored destinationUsing the direction arrows, select the
directory in which the address you
are looking for is stored then press
the
"VAL" button.
The stored addresses are displayed.A cursor on the left-hand side of the
screen indicates your position in the
list. Select a description, by scrolling
through the list using the direction
arrows, then press the "VAL" button.
The complete address is displayed.
Select the "Validate" function then
press the "VAL" button. Select a
guidance criterion. Guidance begins,
follow the instructions.

47
-
Audio equipment and telematics
01-01-2006
Display configuration
From the general menu, the
"Configure display"
menu gives
access to the following parameters:
- Adjustment of the display brightness;
- Adjustment of the date and time;
- Selection of the language of the display and voice information
(English, German, Spanish, French,
Italian, Dutch);
- Adjustment of formats and units. This enables you to choose
between Km/h or mph and degrees
Celsius or Fahrenheit and to modify
the format for the hours (12 or 24
hour mode). Navigation optionsFrom the navigation/guidance menu,
the
"Navigation options" menu
offers the following options:
- Management of the directories. It enables an address stored under
a description to be renamed or
deleted. To do this, select the
directory and the description to be
changed;
- Voice synthesis volume adjustment;
- Deletion of all data stored in the two directories;
- Stopping or resuming of guidance. Two messages may be displayed
depending on the previous status:
"Resume guidance" or "Stop
guidance" . Guidance toolsAccess to the
"Guidance tools"
menu is by pressing the "VAL" button
during guidance.
It enables:
- the current guidance criterion to be changed,
- the programmed destination to be displayed or changed,
- the voice synthesis volume to be adjusted,
- the current guidance to be stopped.

48 -Comfort
01-01-2006