Peugeot 206 CC Dag 2004 Owner's Guide

22
21-06-2004
23
21-06-2004
INSTRUMENTS AND CONTROLS
Service indicator
This is a visual reminder of when
the next service is due. This service
is to be carried out according to the
manufacturer’s servicing schedule.
Operation
As soon as the ignition is switched
on and for 5 seconds, the spanner
symbolising ‘’service operation’’ is lit.
The trip recorder display shows the
distance remaining (in round igures)
before the next service.
Example: 4,800 miles/km remain
before the next service is due.
When the ignition comes on and for
5 seconds the display indicates: 5 seconds after the ignition is
switched on, the total distance
recorder resumes normal operation
and the display shows the total or trip
distances.
The distance remaining before
the next service is less than
500 miles (1,000 km).
Example:
400 miles (900 km) remain
before the next service is due.
When switching on the ignition and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance
recorder resumes normal operation
and the symbol remains lit.
This indicates that a service should
be carried out shortly. The display
shows the total or trip distances. The service is overdue.
Each time the ignition is switched on
and for 5 seconds, the symbol and
the excess distance lash.
Example:
the service is overdue by
300 miles/km. The service should be
carried out very shortly.
When the ignition is switched on and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance
recorder resumes normal operation
and the symbol remains lit. The
display shows the total or trip
distances.
Note: the service spanner lights
if the two-year interval has been
exceeded*.
INSTRUMENT PANEL
DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder, it remains displayed for 30 seconds when the
ignition is switched off, on opening
the driver's door, as well as on
locking and unlocking the vehicle.
* According to country.

24
21-06-2004
25
21-06-2004
INSTRUMENTS AND CONTROLS
Engine oil level indicator
When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
service information.
Surplus of oil
Flashing of the six squares and
displaying of "max" indicate a
surplus of oil which could damage
the engine.
If the surplus of oil is conirmed by
a check using the dipstick, contact a
PEUGEOT dealer without delay.
Resetting the service indicator
Your PEUGEOT dealer carries out
this operation after each service.
The reset procedure is as follows:
- Switch off the ignition.
- Press and hold button
1.
- Switch on the ignition.
The display begins a 10 second
countdown.
- Keep button 1 pressed for 10
seconds.
The display shows [=0] and the
service symbol disappears.
Lack of oil
Flashing of the six segments and
displaying of "min" indicate a lack of
oil which could damage the engine.
If the lack of oil is conirmed by
a check using the dipstick, it is
essential that the level is topped up.Oil level gauge fault
Flashing of the six segments
indicates a malfunction of the oil
level gauge.
There is a risk of damage to the
engine.
Contact a PEUGEOT dealer.
The level read on the gauge will
only be correct if the vehicle is
on level ground and the engine
has been off for more than 10
minutes.

24
21-06-2004
25
21-06-2004
INSTRUMENTS AND CONTROLS
Briely pressing button 1 alternates
between the total and trip distance
displays.
To reset the trip recorder to zero,
when it is displayed press button 1
until zeros appear.
Total distance recorder
With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum (or
maximum) setting, release the button
then press it again to increase (or
reduce) the brightness.
As soon as the lighting is of the
required brightness, release the
button.
LIGHTING RHEOSTAT
Automatic lighting of hazard
warning lights*
When braking in an emergency,
depending on the force of
deceleration, the hazard warning
lights come on automatically. They
switch off automatically the irst time
you accelerate.
It is also possible to switch them off
by pressing the button.
HAZARD WARNING
LIGHTS
Press the button, the direction
indicators lash.
They can operate with the ignition
off.
* According to destination.

26
21-06-2004
27
21-06-2004
Setting the parameters
Press button 1 for two seconds to
access the settings. The information
lashes to show it is ready to be
modiied.
Then, individual presses on button 1
allow you to scroll through the various
data in the following sequence:
- language in which the information is displayed,
- unit of distance (kms or miles),
- unit of temperature (degrees Celsius or Fahrenheit),
- time format (12 then 24 hour mode),
- hour,
- minutes,
- year,
- month,
- day.
Pressing button 2 allows you to
change the information selected.
Maintain the pressure for rapid
scrolling.
After 7 seconds without operation,
the screen returns to the main display
and the modiied data is recorded.DISPLAY B
This enables the following information
to be displayed:
- the time,
- the date,
- the outside temperature (this lashes when there is a risk of ice),
- the radio displays,
- the status of the doors. The display shows you, by means of a graphic,
whether a door is open,
- the warning messages (e.g. ''battery charge low'') or information
messages (e.g. "fuel tank low''),
displayed temporarily, can be
cleared by pressing button 1 or 2,
- the trip computer.
YOUR 206 CC IN DETAIL

26
21-06-2004
27
21-06-2004
YOUR 206 CC IN DETAIL
DISPLAY C
This enables the following information
to be displayed:
- the time,
- the date,
- the outside temperature (this lashes when there is a risk of ice),
- the radio displays,
- the status of the doors. The display shows you, by means of a graphic,
whether a door is open,
- the warning messages are displayed temporarily (e.g. "low
fuel level'') and can be cleared
using the remote control,
- the trip computer (see corresponding section),
- the satellite navigation system (see corresponding section). Permanent Localisation
This function displays the name of
the street in which the vehicle is
located when guidance is inactive.
Press the button "
mod" of the remote
control, to display the name of the
street in which you are located.
In order to " zoom" to see the
information more clearly, press the
right arrow of the remote control.
IMPORTANT : the CD-Rom
containing the map data must be
present in the drive.
Setting the parameters
The remote control allows you to
access the settings. Accessing
the different menus is described in
the section "Satellite Navigation
System".

28
21-06-2004
29
21-06-2004
AUDIO RD3YOUR 206 CC IN DETAIL
Stalk movement
Function
1 - Press (behind) Increase volume
2 - Press (behind) Decrease volume
1 + 2 - Simultaneous press Sound cut-off (mute); restoring of the sound b y pressing any button
3 - Press Automatic search of higher frequencies (radio)
Selection of the next track (CD)
4 - Press Automatic search of lower frequencies (radio)
Selection of the previous track (CD)
5 - Press the end Change of source (radio/CD/CD changer)
6 - Rotation (clockwise) Selection of next station stored in memory (radio) -
Selection of following CD
7 - Rotation (anti-clockwise) Selection of previous station stored in memory (radio) -
Selection of previous CD

28
21-06-2004
29
21-06-2004
YOUR 206 CC IN DETAIL
ButtonFunction
A Radio on/off
B - Reduction in volume
C + Increase in volume
D
5Ejection of CD
E RDS RDS function on/off
Press for more than 2 seconds: regional following mode on/off
F
TATrafic information priority on/off
Press for more than 2 seconds: PTY function on/off
G
¯Adjustment of bass, treble, loudness, sound distribution and a utomatic volume correction
H
5Increase of the functions associated with button G
I
6Decrease of the functions associated with button G
J 8Manual and automatic search of higher frequency
Selection of next CD track and of the PTY (radio)
K MAN Manual/automatic operation of buttons J and L
L 7Manual and automatic search of lower frequency
Selection of previous CD track and of the PTY (radio)
M CH. CD Selection of CD changer
Press for more than 2 seconds: shufle
N CD Selection of the CD source
Press for more than 2 seconds: shufle
O Radio Selection of the radio source. Selection of wavebands FM1, FM2,
FMAST, AM
Press for more than 2 seconds: automatic storing of stations (autosto re)
1 to 6 1 2 3 4 5 6 Selection of station stored in memory
Press for more than 2 seconds: storing of a station in memory
1 to 5 1 2 3 4 5 Selection of the CDs in the CD changer

30
21-06-2004
31
21-06-2004
YOUR 206 CC IN DETAIL
GENERAL FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically
emphasises bass and treble tones.
Press button H or I to switch the
function on or off.
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.
The set can operate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
vehicle. It would not function if itted
to another vehicle.
The anti-theft system is automatic
and requires no action on your
part.ADJUSTING THE VOLUME
Press the button C to increase the
volume, or button B to decrease it.
Continuous pressure on buttons B
and C allows a gradual adjustment
of the volume. Adjusting the bass
Adjusting the treble
When
"TREB" is displayed, press
button H or I to vary the setting.
- "TREB -9" for a minimum treble
setting,
- "TREB 0" for a normal setting,
- "TREB +9" for a maximum treble
setting.
Press button
G
several times in
succession to access
the bass ( BASS),
treble (TREB) ,
loudness (LOUD) ,
fader (FAD), balance
( BAL) and automatic
volume correction settings.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button G
after coniguration of the automatic
volume correction.
Note: bass, treble and loudness
settings are speciic to each source.
It is possible to set them differently
for radio, CD or CD changer. When
"BASS" is
displayed, press
button H or I to vary
the setting.
- "BASS -9" for
a minimum bass
setting,
- "BASS 0" for a
normal setting,
- "BASS +9" for a maximum bass
setting.

30
21-06-2004
31
21-06-2004
YOUR 206 CC IN DETAILRADIO
Notes on radio reception
Your car radio is subject to
phenomena which do not affect
domestic radio sets. Both AM (MW/
LW) and FM reception are subject to
various forms of interference. This
is no relection on the quality of the
equipment, but is due to the nature of
the signals and the way in which they
are transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the
result of increasing distance from
the transmitter, delection of the
signals by obstacles (mountains,
hills, buildings etc.), or of being in
an area which is not covered by a
transmitter.
Selecting radio mode Automatic station search
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press
button H or I.
Button H increases the volume at
the front.
Button I increases the volume at the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press
button H or I.
Button H increases the volume on
the right-hand side.
Button I increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons H or I to switch the
function on or off.
Press button O. Press button
O briely
to select wavebands
FM1, FM2, FMast and
AM.
Briely press button J or L to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
The scrolling stops at the irst station
found as soon as the button is
released.
If the TA trafic programme is
selected, only stations broadcasting
this type of programme are selected.
Searching for a station occurs irst
in "LO" sensitivity (selection of
the most powerful transmitters)
during scanning of the waveband,
then in "DX" sensitivity (selection
of the weakest and most distant
transmitters).
To make a direct search in "DX"
sensitivity, press button J or L twice.
Selecting a waveband

30
21-06-2004
31
21-06-2004
YOUR 206 CC IN DETAILRADIO
Notes on radio reception
Your car radio is subject to
phenomena which do not affect
domestic radio sets. Both AM (MW/
LW) and FM reception are subject to
various forms of interference. This
is no relection on the quality of the
equipment, but is due to the nature of
the signals and the way in which they
are transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the
result of increasing distance from
the transmitter, delection of the
signals by obstacles (mountains,
hills, buildings etc.), or of being in
an area which is not covered by a
transmitter.
Selecting radio mode Automatic station search
Adjusting the front/rear sound
distribution (Fader)
When
"FAD" is displayed, press
button H or I.
Button H increases the volume at
the front.
Button I increases the volume at the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press
button H or I.
Button H increases the volume on
the right-hand side.
Button I increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons H or I to switch the
function on or off.
Press button O. Press button
O briely
to select wavebands
FM1, FM2, FMast and
AM.
Briely press button J or L to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
The scrolling stops at the irst station
found as soon as the button is
released.
If the TA trafic programme is
selected, only stations broadcasting
this type of programme are selected.
Searching for a station occurs irst
in "LO" sensitivity (selection of
the most powerful transmitters)
during scanning of the waveband,
then in "DX" sensitivity (selection
of the weakest and most distant
transmitters).
To make a direct search in "DX"
sensitivity, press button J or L twice.
Selecting a waveband