Peugeot 206 CC Dag 2006 Workshop Manual

49
-Comfort
01-01-2006
VENTILATION
1
. Windscreen de-icing or
demisting vents.
2 . Front door windows de-icing or
demisting vents.
3 . Side vents.
4 . Centre vents.
5 . Air outlet to front footwells.
6 . Air outlet to rear footwells (with
automatic air conditioning only.
Advice on operation and
notes
Place the air flow control at a level
sufficient to ensure an adequate
renewal of air in the passenger
compartment.
When the air flow control is in the
OFF position (system switched off),
temperature-related comfort is no
longer guaranteed. However, a slight
flow of air, due to the movement of
the vehicle, can still be felt.
Select the air distribution which is
most suited to your requirements and
the weather conditions.
Change the temperature setting
progressively for greater comfort.
Place the air intake control in the
"Exterior air" position, this facilitates
demisting.
If the interior temperature remains
very high following a long period
parked in the sun, do not hesitate to
ventilate the passenger compartment
for a few minutes.
To obtain a perfectly uniform
distribution of air, do not cover the
exterior air intake grille, the vents,
the air passages and the air outlets
in the footwells. In certain cases of particularly
arduous use (towing the maximum
load on a steep gradient in a high
temperature), cutting off the air
conditioning permits recovery of
the engine power and, therefore
improvement of the towing capacity.
Ensure that the passenger
compartment filter, located by the
windscreen, under the bonnet, is
in good condition. Have the filter
elements replaced regularly. If you
drive in a dusty environment, change
them twice as often.
The air conditioning system does not
contain chlorine and does not present
any danger to the ozone layer.
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month to keep it in perfect working
order.
The water formed by the
condensation of the air conditioning
system is discharged via an opening
provided for this purpose. Therefore,
a puddle may form underneath the
vehicle when stationary.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.

50 -Comfort
01-01-2006
DE-ICING AND DEMISTING
When the engine is running,
pressing this button de-ices
the rear screen and exterior
mirrors.
It switches off automatically, after
approximately twelve minutes*, to
prevent an excessive consumption
of current. Pressing the button
again restarts operation for twelve
minutes.
It is possible to stop the operation of
the de-icing before it is switched off
automatically by pressing the button
again.
Switch off the de-icing as soon as
you consider this necessary as low
current consumption reduces fuel
consumption.
Manual demisting*
To quickly demist the windscreen
and side windows:
- switch on the air conditioning,
- place the temperature and air flow controls in the maximum position,
- close the central vents,
- place the exterior air intake control on the left, in the "Exterior Air"
position.
Automatic demisting, visibility
programme*
In some cases, the AUTO programme
may not be sufficient to demist
the windscreen and side windows
(humidity, several passengers,
ice...).
* According to version or country.
De-icing the rear screen and
mirrors
Note: this function is deactivated
when the roof is stored in the boot. Select the
"visibility"
demisting programme by
pressing this button to clear
the windows quickly.
To exit from this programme and
return to the AUTO programme,
press the AUTO button.

51
-
Comfort
01-01-2006
HEATING / VENTILATION
The heating and ventilation can only operate when the e
ngine is running.
2. Air distribution adjustment
1. Temperature adjustment
Turn the control from blue (cold) to
red (hot) to adjust the temperature to
suit your requirements.
Windscreen and side win-
dows (de-icing/demisting).
Windscreen, side windows
and footwells.
Footwells.
Centre and side vents.
These settings are recommended for
cold climates.
This setting is recommended for hot
climates.
The air distribution can be adjusted by
placing the control in an intermediate
position, marked "
-". 3. Air flow adjustment
Turn the control from position
1 to position 4 to obtain an
air flow sufficient to ensure
your comfort.
4. Air intake / Air recirculation
The recirculation of interior air
prevents exterior odours and
smoke entering the passenger
compartment.
The intake of exterior air prevents
and eliminates misting of the
windscreen and side windows. Air intake.
Air recirculation.
Move the manual control 4 to the
right for the "Interior air recirculation"
position.
Move the manual control 4 to the
left to return to the "Exterior air
intake" position as soon as possible
to prevent deterioration of the air
quality.

52 -Comfort
01-01-2006
AIR CONDITIONING
The air conditioning can only operate when the engine is running.
The air conditioning does
not operate while the air flow
adjustment control is in the "OFF"
position .
To guarantee correct operation of
your air conditioning system, we also
recommend that you have it checked
regularly.
1. Air conditioning On/Off
The air conditioning is designed to
operate effectively in all seasons,
with the windows closed. In summer,
it permits lowering of the temperature
and in winter, above 0 °C, it increases
the effectiveness of the demisting. 2. Temperature adjustment
Turn the control from blue (cold) to
red (hot) to adjust the temperature to
suit your requirements.
Windscreen and side win-
dows (de-icing/demisting).
Windscreen, side windows
and footwells.
Press the switch, the
indicator light comes on. Footwells.
3. Air distribution adjustment
Centre and side vents.
These settings are recommended for
cold climates.
This setting is recommended for hot
climates.
The air distribution can be adjusted by
placing the control in an intermediate
position, marked "
-".

53
-
Comfort
01-01-2006
4. Air flow adjustment
Turn the control from position
1 to position 4 to obtain an
air flow sufficient to ensure
your comfort.
Intake of exterior air.
Air recirculation.
The recirculation of interior air
prevents exterior odours and
smoke entering the passenger
compartment.
The intake of exterior air prevents
and eliminates misting of the
windscreen and side windows.
Used simultaneously with the
air conditioning, air recirculation
improves air conditioning
performance.
Used in a damp climate, air
recirculation may result in misting of
the windows.
Move the manual control 5 to the
right to the "Interior air recirculation"
position.
Move the manual control 5 to the left
to the "Exterior air intake" position
as soon as possible to prevent
deterioration of the air quality.
5. Air intake / Air recirculation

54 -Comfort
01-01-2006
Note: in the cabriolet version, the performance of the system may be redu ced.
AUTOMATIC AIR CONDITIONING
The air conditioning can only operate when the engine is running.
Automatic operation
2. Control by the AUTO
programme
Press the "AUTO" button.
We recommend that you
use this mode: it provides
optimised automatic control
of all of the functions, passenger
compartment temperature, air flow,
air distribution and air recirculation,
in accordance with the comfort value
that you have chosen. This system is
designed to operate effectively in all
seasons, with the windows closed. Note:
for your comfort, the values
set when the engine is switched
off are retained on re-starting if
the temperature in the passenger
compartment has not changed
significantly; otherwise, operation
resumes in automatic mode.
When the engine is cold, to prevent
too great a distribution of cold air, the
ventilation will only reach its optimum
level gradually.
On entering the vehicle, if the interior
temperature is much colder or warmer
than is comfortable, there is no need
to change the value displayed in
order to reach the required level of
comfort. The system eliminates the
temperature difference automatically
and as quickly as possible.
Manual operation
If you wish, you can make a different
choice from that offered by the
system by changing a setting. The
other functions will still be controlled
automatically.
Pressing the AUTO button returns
the system to completely automatic
operation.
1. Temperature adjustment
The value indicated on the
display corresponds to a
level of comfort and not to
a temperature in degrees
Celsius or Fahrenheit.
Press the arrows 1 (up and down)
to change this value. A setting
around 21 enables a comfortable
temperature to be obtained.

55
-Comfort
01-01-2006
3. Air conditioning On/Off
Press this button to stop air
cooling.
The symbol ECO is
displayed.
Automatic operation of the air
conditioning is resumed when the
button is pressed again.
The symbol A/C is displayed.
Notes
To prevent condensation on the
inside of the vehicle in cold or wet
weather, you are advised to avoid
using the ECO mode.
To guarantee correct operation of
your air conditioning system, we also
recommend that you have it checked
regularly.
4. Air distribution
Pressing this button several
times in succession enables
the air flow to be directed in
turn towards:
- the windscreen (de-icing or demisting),
- the windscreen and the footwells,
- the footwells,
- the centre and side vents and the footwells,
- the centre and side vents. 5. Air flow
Press buttons "+" and
"-" respectively to
increase or decrease
the air flow.
6. Air intake / Air recirculation 7. Switching the system off
The OFF button switches
off all the functions of the
system.
Temperature-related com-
fort and demisting are no longer
guaranteed but a slight flow of air is
maintained.
Pressing the OFF, AUTO , or
"visibility" button again reactivates
the system with the values set before
it was switched off.
Note: if you wish to cut off the flow
of air completely, press the air intake
button 7.
Press this button for
recirculation of the interior
air. Recirculation, shown
on the display, enables
the passenger compartment to be
insulated from exterior odours and
smoke.
Avoid prolonged recirculation of
interior air (risk of condensation and
deterioration of the air quality).
Press the button again to resume
automatic management of the intake
of air.

56 -Comfort
01-01-2006

57
-
Comfort
01-01-2006
THE FRONT SEATS
1 - Forwards/backwards
adjustment
Lift the lever and slide the seat
towards the front or the rear.
2 - Adjusting the height and angle of the head restraint
To raise the head restraint, pull it
upwards. 3 - Access to the rear seats
Pull one of the two handles to fold
down the seat back and move the
seat forwards. On repositioning, the
seat returns to its initial position.
No
person nor object must prevent
the seat from returning to its initial
position ; returning to this position is
necessary for it to be locked.
Never drive with the head
restraints removed. These
should be correctly fitted
and adjusted.
The setting is correct when the
upper edge of the head restraint
is level with the top of the head.
The head restraint has a frame
with notches which prevents it from
dropping down (safety device in case
of impact).
To lower the head restraint you must
simultaneously:
- press the knob on the left-hand side at its base,
- press downwards.
To remove the head restraint, press
the lug.
The angle of the head restraint can
also be adjusted. It is not possible to gain access to
the rear seats if the front seat is in a
reclining position.
4 - Seat height adjustment

Pull the handle upwards.
Remove your weight from the seat to
raise, or press on the seat to lower.
5 - Adjusting the seat back angle
Push the control towards the rear .
6 Heated seats control
Press the switch. The temperature is
controlled automatically.
Pressing the switch again stops
operation.

58 -Comfort
01-01-2006
ADVICE ON CHILD SEATS
The incorrect installation of a child
seat in a vehicle compromises the
child's protection in the event of an
accident.
Remember to fasten the seat belts
or the child seat harnesses keeping
the slack in relation to the child's
body to a minimum , even for short
journeys.
For optimum installation of the
"forward facing" child seat, ensure
that the back of the child seat is in
contact with the back of the vehicle's
seat and that the head restraint does
not cause any discomfort.
If the head restraint has to be
removed, ensure that it is stored or
attached securely to prevent it from
being thrown around the vehicle in
the event of sharp braking. Installing a booster seat
The chest part of the seat belt must
be positioned on the child's shoulder
without touching the neck.
Ensure that the lap part of the seat
belt passes correctly over the child's
thighs.
PEUGEOT recommends the use of a
booster seat which has a back, fitted
with a seat belt guide at shoulder
level.
* According to version.
As a safety precaution, do not leave:
- one or more children alone and
unsupervised in a vehicle,
- a child or an animal in a vehicle which is exposed to the sun, with
the windows closed,
- the keys within reach of children inside the vehicle.
To prevent accidental opening of the
doors, use the "Child lock"*.
Take care not to open the rear
windows by more than one third*.
To protect young children from the
rays of the sun, fit side blinds on the
rear windows.
Children under the age of 10 must
not travel in the "forward facing"
position on the front passenger seat,
unless the rear seats are already
occupied by other children, cannot
be used or are absent.
Disarm the passenger air bag* when
a "rear facing" child seat is installed
on the front seat.
Otherwise, the child would risk being
seriously injured or killed if the air
bag were to inflate.