Peugeot 206 Dag 2006 Manual PDF

71
-Audio equipment and telematics
Select the
"Directory" function to
access the file in which the address
you are looking for is archived.
Select a description by scrolling down
the list by means of the dial, then
confirm by pressing the dial. The
directory file is then displayed.
Select the "OK" function, then press
the dial to access the guidance
activation function.
Follow the directions given by the
system.
Selecting a destination stored in
the directory
Select the "Previous destinations"
function to access one of the last
twenty addresses stored.
Select a description by scrolling
down the list by means of the dial,
then confirm it by pressing the dial.
The complete address is then dis-
played.
Select the "OK" function, then press
the dial to access the guidance acti-
vation function.
Follow the instructions given by
the system.
Selection of one of the previous
destinations
- "Add a stage" to your route after
starting guidance.
- "Order or delete stages" .
- "Divert route" . You must indicate
the number of miles (kilometres)
that you wish to avoid to permit the
calculation of a new route.
- Select the initial "Chosen destina-
tion" in order to change it.
Note: if a stage is programmed, the
navigation system will always try to
pass via this stage until you have
gone through it or deleted it.
Stages and routes

72 -Audio equipment and telematics
- "Define the calculation criteria"
for your route so that it is the fast-
est, the shortest, takes account of
the traffic information, etc... The
last criteria selected are displayed.
- "Set the voice synthesiser" , set
the volume of the guidance instruc-
tions.
-
"Activate/deactivate road names" ,
set the pronunciation in the spoken
instructions.
- "Description of the CD ROM" , to
display the Navigation CD ROM
information.
- "Delete the previous destina-
tions" .
Guidance options
The last criterion used is displayed.
Select a criterion from the list, then
validate by pressing the dial.
When the criterion of your choice
has been selected, select the "OK"
function then confirm by pressing the
dial.
Calculation criteria Management of the directory
This function enables you to rename
an address stored in the directory.
Select the description corresponding
to the stored address to be changed.
Select the "Rename" function, then
confirm by pressing the dial.
Select the "OK" function, then
confirm by pressing the dial to record
the changes made.
Stopping/Resuming guidance
"Stop guidance"
During guidance, select this function
then validate.
"Resume guidance"
In the absence of guidance, select
this function then validate to activate
guidance to the last destination pro-
grammed.
Note: after re-starting the engine,
a screen appears enabling you to
resume guidance activated before
the ignition was switched off.

73
-Audio equipment and telematics
The contextual menu associated with
the
"Navigation - Traffic Info" ap-
plication appears as a superimposed
display, when this is the application
currently in use in the main screen
window.
This menu is limited to the following
functions:
- displaying of the map in "full screen" mode or downsized on the right-
hand side ("windowed screen")*,
- changing of the initial route,
-
storing of the current location (postal
address if available or, if it is not, the
GPS co-ordinates of the position),
- changing of the route "guidance criteria",
- stopping or resuming of guidance.
"Navigation - Traffic Info"
contextual menu
TMC (Traffic Message Channel)
RDS Traffic Information
The RT3 GPS audio/telephone per-
mits access to the TMC RDS traffic
information which is broadcast free
of charge on the FM waveband.
This function enables you to receive
messages regarding the traffic conditions
(accidents, traffic jams, weather, ...).
They may appear temporarily as a
superimposed display or be read by
the voice synthesiser, if it is active.
You can read the messages broadcast
by the TMC station while listening to
another station.
In map mode, special TMC symbols
are displayed depending on the type
of information*.Select the
"TMC Traffic Informa-
tion" function from the "Navigation/
Traffic Info" menu:
- "Consult the messages" to dis-
play the list of TMC messages
available,
- "Filter the TMC information"
to select a type of message and
initialise the TMC station,
- "Voice synthesis" to listen to the
TMC messages received,
- "Activate/Deactivate message
presentation" to display/not dis-
play the TMC messages received.
* According to screen.

74 -Audio equipment and telematics
Filtering of the TMC messages
To filter these messages, select the
"Filter the TMC info" function from
the "TMC Traffic Information"
menu, the screen then shows:
- "Activate/deactivate the filter ac-
cording to route" , in navigation
mode, this permits the selection
of events located on the guidance
route and in the direction of travel
only.
- "Filter by event" , permits selec-
tion of the required kinds of event
only (all selected by default).
- "Geographical filter" , permits se-
lection of the events located around
the vehicle and/or around a given
location. The various filters can by
used simultaneously.
- "Selection of the TMC station" ,
permits the selection of another
station indicating that it broadcasts
RDS-TMC information.
You can filter these messages using
one or more filters simultaneously. Filter by event
This choice enables you to select the
kinds of event about which you wish
to be informed:
- Those classified as road-related
such as traffic, road closures or ve-
hicle restrictions and/or,
- Those concerning the town in which you are located such as parking,
public transport and demonstra-
tions.
Access to this information depends
on its availability.
Note: if you do not select any events,
you will not receive any TMC traffic
information. Geographical filter
This choice enables you to select the
events zone (radius of 1 to 125 miles
(3 to 200 km) about which you wish
to be informed:
- events which are taking place
around your vehicle and/or,
- events in a location to be selected.
The two filters can be used simulta-
neously. In this case, the radius is the
same for both.
We recommend a filter according to
the route and a geographical filter
around the vehicle:
- of 3 miles (5 km) or 6 miles (10 km) for a region with heavy traffic,
- of 12 miles (20 km) for a region with normal traffic,
- of 60 miles (100 km) for long journeys (motorway).

75
-Audio equipment and telematics
DISPLAY FLOW CHARTS skating rinks, bowling alleys winter sports centres parks & gardens theme parks transport & automobile ports, airports station, bus stations automatic checks vehicle hire automatic checks service stations, garages directory nav directory town, street, n° ok previous destinations  list of destinations town, street, n° ok STAGES AND ROUTES add a stage enter an address town street junction n° gps longitude latitude choice of a service administration & security hotels, restaurants & businesses culture, tourism & shows sports centres & outdoor pursuits transport & automobile directory nav directory town, street, n° ok previous destinations  list of destinations town, street, n° ok order/delete stages divert route divert route over 2 km
 the best diversion possible is 3 km.
continue?
 range 1-50 ok chosen destination town, street, n° change GUIDANCE OPTION define the calculation criteria the fastest the shortest distance/time with tolls with ferry  traffic info adjust speech synthesis volume activate/deactivate activate/deactivate street names description of the cd-rom delete the previous destinations do you want to delete the list of previous destinations?
 yes/no TMC TRAFFIC INFORMATION consult the messages filter the TMC traffic information activate/deactivate the route filter filter by event traffic information traffic information road closures size restrictions road conditions weather & visibility urban information parking public transport demonstrations geographical filter around the vehicle around a place/select filter radius 50 km choice of TMC station  station name
 MAIN FUNCTION
 CHOICE A Choice A1 Choice A2 CHOICE B...
 NAVIGATION/TRAFFIC INFO
 CHOICE OF DESTINATION enter an address town  street junction n°  gps longitude latitude choice of a service administration & security town halls, town centre universities, colleges hospitals hotels, restaurants & businesses hotels restaurants vinyards business centres supermarkets, shopping craft centres culture, tourism & shows tourism, historical monuments culture, museums & theatres shows & exhibitions casinos & nightlife cinemas sports centres & outdoor pursuits sports centres, complexes golf courses

76 -Audio equipment and telematics
 TELEPHONE AND TELEMATIC
SERVICES

CALL list of calls dial directory voice mail SERVICE customer contact centre  PEUGEOT assistance  PEUGEOT mobile services (if atx services activated)
 messages received list of v-cards TELEPHONE FUNCTIONS network network search mode automatic mode manual mode list of networks networks available list of networks duration of calls partial counter total duration zero reset manage the pin code activate store the pin code
 next station speech synthesis volume activate/deactivate activate/deactivate message presentation
 RESUME/STOP GUIDANCE
 FILE TRANSFER infrared exchange send all files send one file receive by infrared exchange with the sim card send all sim files send one sim file receive all files from sim receive a file from sim
 AUDIO FUNCTIONS
 ACTIVATE/DEACTIVATE RDS ALTERNATIVE FREQUENCIES
 ACTIVATE/DEACTIVATE REGIONAL MODE
 ACTIVATE/DEACTIVATE RADIO TEXT INFO
 ACTIVATE/DEACTIVATE CD DETAILS INFO
 TRIP COMPUTER
 TRIP COMPUTER CONFIGURATION
 enter distance to destination 0 km select units l/100 & km mpg & miles km/l & km °c/°f bar, psi DIAGNOSTICS warning log equipment backup supply gps coverage STATUS OF FUNCTIONS list of functions
 DIRECTORY
 MANAGEMENT OF DIRECTORY FILES consult or change a file entire directory name voice recording notes address town street n° number display list of numbers change add delete e-mail display list of numbers change add delete add a file description delete a file entire directory delete all files do you want to delete all of the files in the directory (non sim)?
 yes no CONFIGURATION OF THE DIRECTORY select a directory user xxxx name a directory select the starting directory user xxx last directory used

77
-Audio equipment and telematics
 change the pin code entering the pin code old code > new code  confirmation >> correct call options delete the list of calls and sms do you want to delete the list of calls and
sms from the equipment?
 configure the calls displaying of my number automatic pick-up after 3 rings ring options for voice calls volume type of ring for text messages (sms) text message buzzer voice call diversion n° TEXT MESSAGES (SMS) reading text messages received list of text messages received sending a text message list of saved text messages writing a text message text message message sent delete the list of text messages
 CONFIGURATION*
 DISPLAY CONFIGURATION adjust the brightness sound speech synthesis adjustment volume of guidance instructions volume activate/deactivate volume of other messages volume activate/deactivate select a voice male female speech synthesis activate/deactivate voice command adjustment volume activate/deactivate international parameters adjust the date & time day, month, year time, 12 h, 24 h, am/pm adjusting the minutes on gps select the units l/100 & km mpg & miles km/l & km °c/°f bar, psi choice of language list of languages available
* Configuration menu: according to display. Flow chart version 5.5

78 -Audio equipment and telematics
5 CD CHANGER*
This is located in the glove box. It
holds up to 5 discs.
To load the changer, insert the discs
with the printed side upwards.
To remove a disc, press and hold one
of the buttons "1" to "5" .
The use of copied com-
pact discs may cause
faults.
Insert circular compact discs
only.
* According to country.
RADIO RECEPTION
(aerial adjustment)
Notes on radio reception
Your radio will be subject to phenom-
ena which do not affect domestic
radio sets. Both MW/LW and FM re-
ception are subject to various forms
of interference, which are no reflec-
tion on the quality of your equipment
but are due to the nature of the sig-
nals and the way in which they are
transmitted.
On MW/LW, interference may be no-
ticed when passing underneath high
voltage power lines, under bridges or
in tunnels. On FM, interference may be the re-
sult of increasing distance from the
transmitter, deflection of the signal
by obstacles (mountains, hills, build-
ings, etc.), or of being in an area not
covered by a transmitter.
Saloon: recommended position for
the front aerial for best reception.
No particular position for the fixed
rear aerial (preset aerial).

79
-Audio equipment and telematics
206 AUDIO SYSTEM (RD3 and RT3)
Presentation
Your 206 is fitted with a JBL audio
system, designed specifically for the
passenger compartment.
At the heart of the system, a
240 watt multifunction amplifier (1)
(integrated in the subwoofer in
the boot) independently controls
8 high acoustic definition speakers
and the subwoofer. The speakers are situated:
- in the front door pillars: two
Tweeters (2) for reproduction of the
treble (high frequency) in the front.
- in the front doors: two Woofers (3)
for reproduction of the bass (low
frequencies) in the front.
- in the rear doors: two Tweeters (4)
set into two Woofers (5) , providing a
balance of frequencies in the rear.
- in the boot: a Subwoofer (6) for
reproduction of the bass and ul-
tra-bass (very low frequencies)
throughout the whole of the pas-
senger compartment.
You will appreciate the clarity
and depth and notice that the
sound fills the whole of the vehi-
cle perfectly.
This system provides optimal re-
production and distribution of the
sound in the vehicle, both in the
front and the rear. Adjusting in CD or Radio mode
The basic functions remain those of
the audio set.
There is no need for any further ad-
justment. However, in order to take
full advantage of your JBL audio
system, you are advised to set the
AUDIO functions
(BASS, TREB,
FAD, BAL) to position "0" (zero), the
Loudness (LOUD) to the "ON" posi-
tion for CD mode and to the "OFF"
position for radio mode.

Comfort80 -