lights Peugeot 206 P Dag 2009 Owner's Manual

FAMILIARISATION EXTERIOR
Automatic switching on of the lights
This equipment switches on the side
lights and dipped headlamps when the
light is poor or when the windscreen
wipers are operating continuously,
when the lights stalk is in the "AUTO"
position.

 49
"Follow me home" lighting
This function, linked with the automatic
switching on of the lights or activated
manually, allows you to leave the front
lights on after switching off the ignition.

 48 Braking assistance systems
(ABS, EBFD and EBA)
These systems are linked and comple-
ment each other to assist you to brake
safely and effectively in emergency
situations.

 53

FAMILIARISATION
INSTRUMENTS AND CONTROLS
1. Speed limiter/cruise control switch.

2. Steering wheel height adjustment
control.

3. Lights and direction indicators
control.

4. Instrument panel
Instrument panel lighting rheostat.

5. Driver's air bag.
Horn.

6. Handbrake.

7. Front electric window controls.

8. Central locking control.

9. Bonnet opening control.

10. Fuse box.

11. Headlamp height adjustment.

12. Passenger air bag disarming.

13. Heated seats control.

14. Deactivation of the ESP/ASR.

FAMILIARISATION
1. Steering lock.

2. Audio equipment steering wheel
control.

3. Wipers/screen wash/trip computer
control.

4. Hazard warning lights control.

5. Multifunction display.

6. Air conditioning and rear screen
and mirrors de-icing control.

7. Audio equipment.

8. Front ashtray.

9. Gear lever.

10. 12 V accessories socket.

11. Glove box.
INSTRUMENTS AND CONTROLS

FAMILIARISATION
SEE CLEARLY
Lighting

Ring A

Rear

Ring B
Front
Wipers

 47
 51
Lights off.
Dipped/main beam headlamps.
Automatic switching on of the
lights.
Rear fog lamps.

Ring C
Front and rear fog lamps. Park.
Intermittent wipe.
Wash-wipe.
Side lights.

 50 Fast wipe.
Fast wipe.
Normal wipe.
Automatic wipe.
Park.
Single wipe. Normal wipe.
Intermittent wipe.
Park.
Single wipe.
Wash-wipe: pull the control towards you.

FAMILIARISATION
MONITOR THOROUGHLY

1. When the ignition is on, the orange
and red warning lights come on.

2. When the engine is running, these
warning lights should switch off.
If warning lights remain on, refer to the
page concerned.
Warning lights

 16
Instrument panel

A. When the ignition is on, the fuel
gauge needle should rise.

B. When the engine is running, the
associated low level warning light
should switch off.
If the levels are not correct, top up as
required.

 15 Controls

A. Passenger air bag disarming.

 58

B. Heated seats control.

 33

C. Deactivation of the ESP/ASR.

 54

D. Central locking/unlocking.

 44

15
PETROL - DIESEL MANUAL GEARBOX INSTRUMENT PANELS
Panel which groups together the vehicle operation dials and indicator lights.

4. Speedometer.
Indicates the current speed of the moving vehicle (km/h).

5. Display.

6. Display zero reset button.
Resets the selected function to zero (trip distance recorder or service
indicator).

7. Instrument panel lighting button.
Adjusts the brightness of the lighting of the instrument panel.
Dials

1. Rev counter.
Indicates the speed of rotation of the engine (x 1 000 rpm).

2. Fuel gauge.
Indicates the quantity of fuel remaining in the tank.

3. Cooling temperature.
Indicates the temperature of the engine coolant (°Celsius).
A. Cruise control.
Speed limiter.
(km/h)

B. Trip distance recorder.
(km)

C. Service indicator.
(km) then,
Distance recorder.
(km)
These three functions are displayed in succession when the ignition is
switched on.
For further information, refer to the sec-
tion which corresponds to the function
and to the display associated with it.
Display

!
16
The indicator/warning light comes
on continuously or fl ashes.
Some indicator/warning lights may
light in two different ways. Only by
relating the type of lighting to the
vehicle operating status can it be
ascertained whether the situation
is normal or whether a fault has oc-
curred.
Indicator and warning lights
Visual indicators which inform the driver
when a system comes into operation
(operation or deactivation indicator
lights) or of the occurrence of a fault
(warning light).
Associated warnings
The lighting of certain indicator/warning
lights may be accompanied by an audible
signal and a message on the multifunc-
tion display. Operation indicator lights
The lighting of one of the following indi-
cator lights confi rms that the correspond-
ing system has come into operation.

Left-hand direction indicator.

Handbrake applied.

Right-hand direction indicator.

Main beam headlamps.

Dipped headlamps.

Diesel engine pre-heating.
Wait until this switches off
before operating the starter.
Front fog lamps.

Rear fog lamps.
When the ignition is switched on
The warning lights come on for a few
seconds when the vehicle ignition is
switched on.
When the engine is started, these warn-
ing lights should switch off.
If they remain on, before moving off,
consult the text relating to the warning
light concerned.

!
17
When the engine is running or the
vehicle is moving, the lighting of one of
the following warning lights indicates
the occurrence of a fault which requires
action on the part of the driver. Centralised alert.
Lighting of the centralised alert
is associated with the lighting
of another warning light:
- braking,
- engine oil pressure,
- coolant temperature.
It is imperative that the vehicle is stopped as soon as it is safe to do so.
Anti-lock braking system (ABS).
The lighting of this warning light
indicates the occurrence of a
fault in the anti-lock braking
system.
However, this does not prevent the oper-
ation of the vehicle's assisted braking.
Air bags.
The lighting of this warning light
indicates the occurrence of a
fault in the air bags system or
the pre-tensioning seat belts.
Any fault resulting in the lighting of
a warning light must be the subject
of further diagnostics by reading
the associated message on the
multifunction display.
If a problem arises, do not hesitate
to contact a PEUGEOT dealer.
Warning lights
Passenger air bag disarmed.
The lighting of this warning light
indicates that the passenger
air bag is disarmed. It remains
on until the passenger air bag is reac-
tivated.
Flashing of this warning light indicates
the occurrence of a fault in the air bags
system. Consult a PEUGEOT dealer.

!
17
When the engine is running or the
vehicle is moving, the lighting of one of
the following warning lights indicates
the occurrence of a fault which requires
action on the part of the driver. Centralised alert.
Lighting of the centralised alert
is associated with the lighting
of another warning light:
- braking,
- engine oil pressure,
- coolant temperature.
It is imperative that the vehicle is stopped as soon as it is safe to do so.
Anti-lock braking system (ABS).
The lighting of this warning light
indicates the occurrence of a
fault in the anti-lock braking
system.
However, this does not prevent the oper-
ation of the vehicle's assisted braking.
Air bags.
The lighting of this warning light
indicates the occurrence of a
fault in the air bags system or
the pre-tensioning seat belts.
Any fault resulting in the lighting of
a warning light must be the subject
of further diagnostics by reading
the associated message on the
multifunction display.
If a problem arises, do not hesitate
to contact a PEUGEOT dealer.
Warning lights
Passenger air bag disarmed.
The lighting of this warning light
indicates that the passenger
air bag is disarmed. It remains
on until the passenger air bag is reac-
tivated.
Flashing of this warning light indicates
the occurrence of a fault in the air bags
system. Consult a PEUGEOT dealer.

22
Total distance recorder
System which measures the total dis-
tance travelled by the vehicle during its
life. Lighting rheostat
System for manual adjustment of the
brightness of the instrument panel in
relation to the exterior brightness.
The total and trip distances are displayed for thirty seconds when the ignition is
switched off, when the driver's door is
opened and when the vehicle is locked
or unlocked.
Trip distance recorder
System which measures a distance
travelled during a day or other period
since it was reset to zero by the driver.

 With the ignition on, press the button
until zeros appear. Activation
When the lights are on:

 press the button to change the
brightness of the instrument panel,

 when the lighting reaches the mini-
mum setting, release the button,
then press again to increase it,
or

 when the lighting reaches the maxi-
mum setting, release the button,
then press again to reduce it,

 when the lighting reaches the level
of brightness required, release the
button.
Deactivation
When the lights are off, pressing the
button does not have any effect.