clock Peugeot 206 P Dag 2010 Owner's Manual

INSTRUMENTS and CONTROLS
26
MONOCHROME SCREEN A Adjusting the parameters
Press and hold button 1 for two seconds
to access the settings; the data fl ashes,
indicating it is ready to be modifi ed.
Then, each press of button 1 scrolls
through the various data in the following
order:
- language of information displayed,
- hours (12 then 24 hour mode),
- minutes,
- year,
- month,
- day,
- unit of temperature (degrees Celsius or Fahrenheit).
Pressing button 2 allows modifi cation
of the data selected. Press and hold for
rapid advance (return to start after the
last possible value).
After 7 seconds with no action, the main
display returns; the modifi ed data are
now recorded.

Note: Pressing button 2 briefl y displays
the ambient temperature for a few sec-
onds.
When the ambient temperature is be-
tween -3° and 3 °C, the ambient tem-
perature display on the screen takes
priority over the clock display.
This displays the following information:
- time,
- date,
- ambient temperature * (this fl ashes
when it is between -3 and 3 °C),
- audio system information,
- a door check (e.g.: ''left front door open''),
- warning messages (e.g. ''remote control battery fl at'') or information
messages (e.g. ''economy mode
active''), displayed temporarily.
* With digital air conditioning only.

10
103

Action
Function

1 - Press (behind) Increase volume

2 - Press (behind) Decrease volume

1 + 2 - Simultaneous press Mute; restore the sound by pressing any butt on

3 - Press Automatic search of higher frequencies (radio) -
Selection of the next track (CD)

4 - Press Automatic search of lower frequencies (radio) -
Selection of the previous track (CD)

5 - Press the end Change of source (radio/CD)

6 - Rotation (clockwise) Selection of the next stored station (ra dio)

7 - Rotation (anticlockwise) Selection of the previous stored sta tion (radio)
RD3 AUDIO UNIT