PEUGEOT 206 SW 2004 Service Manual

32 -
31-01-2005
33
-
31-01-2005
Button Function
A Radio on/off.
B - Decrease volume.
C + Increase volume.
D RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
E TA Trafic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
H ¯Selection of bass, treble, loudness, sound distribution and a
utomatic volume correction.
I 5Increase setting of functions associated with button
H.
J 6Decrease setting
of functions associated with button H.
L 8Manual and automatic search of higher frequency.
Selection of next CD track and PTY (radio).
M MAN Manual/automatic operation of buttons L and N.
N 7Manual and automatic search of lower frequency.
Selection of previous CD track and PTY (radio).
P CH.CD Selection of the CD changer.
Press for more than 2 seconds: shufle.
Q CD Selection of the CD.
Press for more than 2 seconds: shufle.
R Radio Selection of the radio. Selection of FM1, FM2, FMast, AM waveba
nds.
Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
S 5
Ejection of the CD.
1 to 6 1 2 3 4 5 6 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
1 to 5 1 2 3 4 5 Selection of a CD changer disc.
Audio equipment and telematics

40 -
31-01-2005
41
-
31-01-2005
Ejection of a disc Selecting a track Shufle (RDM)
When the CD player is selected,
press and hold button Q for two
seconds. The tracks will be played
in random sequence. Pressing the
button again for two seconds returns
you to normal play.
Shufle mode is de-activated each
time the set is switched off.
After insertion of a
disc, printed face
upwards, the player
starts automatically.
If a disc is already inserted, press
button Q.
COMPACT DISC: AUDIO RD3
Selecting CD mode
Press button L to select the next
track.
Press button N to return to the start
of the current track or to select the
previous track.
The use of copied compact
discs may cause faults.
Insert circular compact
discs only.
Press button
S to
eject the disc from the
player. Accelerated play
Press and hold button
L or N for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Audio equipment and telematics

42 -
31-01-2005
43
-
31-01-2005
RT3 GPS AUDIO/TELEPHONE
Stalk movement Function
1 - Press (behind) Increase volume.
2 - Press (behind) Decrease volume.
1 + 2 - Press together Switch off sound (mute); restore sound by pressing an y button.
3 - Press Automatic search of upper frequencies (radio) - Selection of next tra
ck (CD/CD changer).
Continuous pressure until release: accelerated forwards play (CD/C D changer).
4 - Press Automatic search of lower frequencies (radio) - Selection of previous
track (CD/CD changer).
Continuous pressure until release: accelerated backwards play (CD/C D changer).
5 - Press end Change source (radio/CD/CD changer) - Conirmation of selection (o
n a menu or screen) -
Call connect/Call disconnect (Tel./incoming call - Call disconn ect (Tel./Engaged).
Press for more than 2 seconds: display contextual menu (Tel./Not en gaged).
6 - Rotation
(clockwise) Selection of higher station stored in memory or sto
ring in memory in position 1 for station not in
memory (radio) - Selection of following CD - Select ion of following item, on a menu or screen.
7 - Rotation
(anti-clockwise) Selection of lower station stored in memory or stor
ing in memory in position 6 for station not in
memory (radio) - Selection of previous CD - Selecti on of previous item, on a menu or screen.
Audio equipment and telematics

42 -
31-01-2005
43
-
31-01-2005
* During the year.
Button Function
A Press: audio//telephone on/off.
Rotation: volume adjustment.
B 5
Ejection of CD.
C SOURCE Selection of source: radio, CD, CD changer or Aux.
D Call connect (Tel/Incoming call) - Display contextual menu (Tel/N ot engaged).
E Access "PEUGEOT" services menu.
Press for between 2 and 8 seconds: call "PEUGEOT Assistance" direct.
Press for more than 8 seconds: cancellation of the call made.
F MODE Change display.
Press for more than 2 seconds: display general information.
G Press: display contextual menu of display - Conirm inputting or ad
justment.
Rotation: move within a menu - Select function/parameter - Audi o settings: sound ambience, bass,
treble, loudness, fader (front/rear balance), balance (left/righ t balance), automatic volume.
H 5Adjust higher frequency, step by step or continuous (long press).
Select previous CD (CD changer).
I 6Adjust lower frequency, step by step or continuous (long press).
Select following CD (CD changer).
J Infra-red window (IrDA)*.
K ESC Cancel current operation.
Press for more than 2 seconds: clear all superimpos
ed displays and return to permanent application.
L SIM card cover.
M 8Automatic search of higher frequency - Selection of following CD
track.
Double press: change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated forwards play.
Audio equipment and telematics

44 -
31-01-2005
45
-
31-01-2005
Button Function
N 7Automatic search of lower frequency -
Selection of previous CD track.
Double press: change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated backwards play.
O DARK 1st press: display top band (remainder of screen is black) - 2nd press:
brightness removed
(black screen) - 3rd press: return to normal screen.
Press for more than 10 seconds: reinitialisation of the system.
P MENU Display general menu -
Press for more than 2 seconds: display help screen and list of voice
commands.
Q Disconnect.
Press for more than 2 seconds: activation/deactivation of the tran
sfer of the call to the voice mail
or to a call diversion number.
R BAND
AST Select FM1, FM2, FMast, AM wavebands.
Press for more than 2 seconds: automatic storing of stations (autosto
re).
S TA/PTY Trafic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
T RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
U AUDIO Display window for adjusting sound ambience, bass, treble, lo
udness, sound distribution and
automatic correction of volume.
V SOS Press between 2 and 8 seconds: emergency call.
Press for more than 8 seconds: cancellation of the call made.
1 to 6 1 2 3 4 5 6 Select station in memory.
Press more than 2 seconds: store station being listened to in memo
ry.
1 to 5 1 2 3 4 5 Selection of CDs in the CD changer.
0 to 9 * # 0 1 2 3 4 5
6 7 8 9 * # Alphanumeric keypad for entering text and telephone numbers.
Audio equipment and telematics

44 -
31-01-2005
45
-
31-01-2005
GENERAL FUNCTIONSAnti-theft system
The RT3 GPS audio/telephone is
coded in such a way that it can op-
erate only on your vehicle. If itting
it to another vehicle, consult your
PEUGEOT dealer for coniguration
of the system.
The anti-theft system is automatic
and requires no action on your
part.
On/off
With the ignition
switch in the acces-
sories position or with
the ignition on, press
button
A to switch
the audio function of
the RT3 GPS audio/
telephone on or off.
Note: in the absence of an ignition
key, press button A to switch the
telematics system on or off.
The RT3 GPS audio/telephone can
operate for 30 minutes without
switching the vehicle ignition on.AUDIO SETTINGS
ADJUSTING THE VOLUME
Turn button A clockwise to increase
the volume of the audio/telephone or
anti-clockwise to decrease it.
Note: the volume setting is speciic
to each source. It is possible to have
different settings for radio, CD or CD
changer. Press button
U to
access the Sound
Ambience, Bass,
Treble, Loudness,
Fader (front/rear bal-
ance), Balance (left/
right balance) and
Automatic volume adjustment set-
ting windows.
Exit from audio mode is automatic af-
ter a few seconds without any action,
or by pressing the "ESC" button.
Note: bass, treble and loudness set-
tings are speciic to each source. It is
possible to have different settings for
radio, CD or CD changer.
Notes:
- the SIM card must be removed only after the audio/telephone has been
switched off,
- following automatic switching off of the audio/telephone after 30 minutes
it is possible to make a telephone call
by pressing button D,
- after the ignition has been switched off, the audio/telephone can be
switched on again by pressing
buttons D, E, V or by inserting a
CD in the player.
Audio equipment and telematics

46 -
31-01-2005
47
-
31-01-2005
Treble setting
When 'Treble' is displayed, turn but-
ton G to vary the setting.
- '-9' for minimum treble setting
- '0' for normal setting
- '+9' for maximum treble setting
Sound ambience
This function per-
mits the selection of
a "None", "Rock",
"Classical", "Jazz",
"Vocal" or "Techno"
sound ambience.
Turn button G to select
the sound ambience.
Selecting "None" permits access
to all of the settings deined below.
Selecting another ambience sets the
bass and treble automatically.
Bass setting
When 'Bass' is displayed, turn but-
ton G to vary the setting.
- '-9' for minimum bass setting
- '0' for normal setting
- '+9' for maximum bass setting Setting the right/left sound
distribution (Balance)
When
"Balance" is displayed:
- Turn button G clockwise to increase
the volume on the right.
- Turn button G anti-clockwise to
increase the volume on the left.
Automatic volume adjustment
This function allows the volume to
be adjusted automatically depending
on the level of noise produced by the
speed of the vehicle.
Press button G to switch the function
on or off.
Adjusting the loudness
This function automatically empha-
sises bass and treble tones when the
volume is low.
Rotate button
G to switch the func-
tion on or off.
Setting the front/rear sound
distribution (Fader)
When 'Fader' is displayed:
- Turn button G clockwise to increase
the volume in the front.
- Turn button G anti-clockwise to
increase the volume in the rear.
Audio equipment and telematics

46 -
31-01-2005
47
-
31-01-2005
Selecting the radio Automatic station searchRADIO
Notes on radio reception
Car radio/telephone receivers are
subject to phenomena which do not
affect domestic radio sets. Both MW/
LW and FM are subject to various
forms of interference. This is not a
relection on the quality of the equip-
ment, but is due to the nature of the
signals and the way in which they are
transmitted.
On MW/LW interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of the increasing distance from the
transmitter, delection of the signals
by obstacles (mountains, hills, build-
ings, etc.) or of being in an area which
is not covered by a transmitter. Selecting a waveband
Briely press button
M or N to search
for the station immediately above or
below.
The search stops at the irst station
found.
If the TA trafic program is selected,
only the most powerful stations
broadcasting this type of program
are selected.
Searching for a station occurs irst in
'LO' sensitivity (selection of the most
powerful transmitters) for scanning of
the waveband, then in 'DX' sensitiv-
ity (selection of the weaker and more
distant transmitters).
To make a direct search in 'DX' sen-
sitivity, briely press button M or N
twice.
Press
"SOURCE" several times.
Briely pressing button
'BAND/AST' to select
the FM1, FM2, FMast
and AM wavebands.
Audio equipment and telematics

48 -
31-01-2005
49
-
31-01-2005
Briely press button H or I
to increase or decrease the
frequency displayed.
By continuing to press
the button in the direction
selected, you will obtain
continuous scrolling of the
frequency.
Scrolling stops at the irst
station found.
Manual station search
Manual station storing
Select the station required.
Press one of the buttons
"1" to "6"
for more than two seconds.
A sound cut-off conirms that the sta-
tion has been stored in the memory. Automatic storing of FM stations
in the memory (autostore)
Your audio/telephone automatically
stores the 6 stations with the strong-
est signal in FM. These stations are
stored in the FMast waveband.
If it is not possible to ind 6 stations,
the remaining memories are empty.
Press the
''BAND/
AST'' button for more
than two seconds.
Recalling stations stored in the
memory
For each waveband, briely press the
buttons "1" to "6" to recall the cor-
responding stored station.
Audio equipment and telematics

48 -
31-01-2005
49
-
31-01-2005
Regional following mode (REG)
When they are part of a network,
certain stations broadcast regional
programs in the various areas they
serve. With regional following mode
you can keep listening to the same
program.
To do this, press the "RDS" button
for more than two seconds to switch
the function on or off.
The multi-function screen will show:
- REG if the function is active,
- REG crossed out or greyed out
if the function is active but not
available.RDS SYSTEM
Using the RDS (Radio Data
System) function on FM
Radio Data System allows you to
continue listening to the same sta-
tion, whatever frequency it is using
for the region you are going through. Trafic information program
Briely press the
"RDS" button to
switch the function on
or off.
The multi-function screen will show:
- RDS if the function is active
- RDS crossed out or greyed out
if the function is active but not
available. Press the
''TA/PTY''
button to switch the
function on or off.
The multi-function screen will show: - TA if the function is selected
- TA crossed out or greyed out
if the function is selected but not
available.
Any trafic information lash will be
given priority, whatever source you
are listening to (radio, CD or CD
changer).
If you wish to interrupt the broadcast-
ing of a message, press the ''TA/
PTY'' button.
Note: the volume of the trafic
information is independent of the
volume of normal radio/telephone
listening.
You can adjust it by using the volume
button. The setting will be stored and
will be used when the next messages
are broadcast.
RDS station following
This display indicates the name of the
station selected. The audio/telephone
continuously searches for the trans-
mitter which transmits the same
program with the best reception. This
search may cause slight interference
with the transmission.
Audio equipment and telematics