Peugeot 206 SW Dag 2005.5 Workshop Manual

48 -Audio equipment and telematics
01-10-2005
49
-Audio equipment and telematics
01-10-2005
Automatic storing of FM stations
in the memory (autostore)
Recalling stations stored in the
memory
For each waveband, briely press
the buttons
"1" to "6" to recall the
corresponding stored station.
In the case of an RDS station, the
frequency appears for a few seconds
before its name.
Recalling an RDS station may result
in a search for the frequency which
corresponds to the region through
which you are travelling.
Press the
"BAND/AST" button for
more than two seconds.
Your audio/telephone automatically
stores the 6 stations with the strong-
est signal in FM. These stations are
stored in the FMast waveband.
If it is not possible to ind 6 stations,
the remaining memories are empty.
Manual station search
Briely press button H or I
to increase or decrease the
frequency displayed.
By continuing to press
the button in the direction
selected, you will obtain
continuous scrolling of the
frequency.
Scrolling stops when you
release the button.
Manual station storing
Select the station required.
Press one of the buttons "1" to "6"
for more than two seconds.
A window appears on the screen, the
station is stored when it is displayed
on the memory number that you
have allocated to it.

50 -Audio equipment and telematics
01-10-2005
51
-Audio equipment and telematics
01-10-2005
RDS SYSTEM
Using the RDS (Radio Data
System) function on FM
Most FM radio stations use the RDS
system.
This system allows you to continue
listening to the same station,
whatever frequency it is using for the
region you are going through.
This screen indicates
the name of the sta-
tion selected. The
audio/telephone con-
tinuously searches for the transmit-
ter which transmits the same pro-
gramme with the best reception. This
search may cause slight interference
with the transmission.
The function can be switched on
or off via the "RDS" button or the
"AUDIO FUNCTIONS" main menu.
The screen will show:
- "RDS" if the function is active and
available for the station selected.
- "RDS" crossed out or "RDS"
greyed out on the screen* if the
function is active but is not available
on the station.
If the station to which you are
listening does not have several
frequencies in the region through
which you are travelling, you can
switch off the automatic frequency
following. Trafic information programme
Press the "TA/PTY"
button to switch the
function on or off.
The multifunction screen will show: - TA if the function is selected,
- TA crossed out or greyed out*
if the function is selected but not
available.
Any trafic information lash will be
given priority, whatever source you
are listening to (radio, CD or CD
changer).
If you wish to interrupt the
broadcasting of a message, press
the "TA/PTY" button.
Notes: the volume of the trafic
information is independent of the
volume of normal audio/telephone
listening.
You can adjust it by using the volume
button. The setting will be stored and
will be used when the next messages
are broadcast.
You must be on the FM waveband.
During station search or automatic
storing phases, if the "TA" function
is selected, transmitters which are
compatible with the broadcasting of
these messages will be tuned to or
stored irst.
The station being listened to must
indicate via the RDS system that it
broadcasts trafic information. Stations which are organised in
a network (EON) have regional
transmitters which broadcast their
own programmes: you can listen to
one of these stations and switch to
the network station which broadcasts
the trafic information messages.
RDS station following Regional following mode (REG)
When they are part of a network,
certain stations broadcast regional
programmes in the various areas
they serve. With regional following
mode you can keep listening to the
same programme.
You can choose to follow:
• Either a regional station only.
• Or the entire network, with the
possibility of listening to a different
programme.
The function can be switched on or
off via the "AUDIO FUNCTIONS"
main menu or by pressing the "RDS"
button for more than 2 seconds.
The multifunction screen will show:
- REG if the function is active,
- REG crossed out or greyed out*
if the function is active but not
available.
* According to screen

50 -Audio equipment and telematics
01-10-2005
51
-Audio equipment and telematics
01-10-2005
PTY function
This allows you to listen to stations
broadcasting a speciic type of
programme, selected from the list of
available types below:
NEWS SCIENCE
AFFAIRS VARIED
INFO POP M
SPORT ROCK M
EDUCATE EASY M
FICTION LIGHT M
CULTURE OTHER M
WEATHER LEISURE
FINANCE JAZZ
CHILDREN COUNTRY
SOCIAL NATION M
RELIGION OLDIES
PHONE IN FOLK M
TRAVEL DOCUMENT
When FM is selected, press button
"TA/PTY"
for more than two seconds
to switch the function on or off. To ind a
PTY programme:
- select the PTY button,
- turn button G to scroll down the
different types of programmes
offered, then conirm your choice,
when the programme of your choice
is displayed press button M or N
to carry out an automatic search
(after an automatic search the PTY
function is switched off if no station
has been found).
In PTY mode the different types
of programmes can be stored in
the memory. To do this, press the
preselection buttons "1" to "6" for
more than two seconds. To recall
the type of programme stored
in the memory, briely press the
corrresponding button. EON system
This system connects stations
which are part of the same network.
It enables the broadcast of trafic
information or a
PTY programme,
by a station that is part of the same
network as the station to which you
are listening.
The service is available when
you have selected the TA trafic
information programme or the PTY
function.
Audio functions menu
Select the "Audio functions" menu
from the general menu to:
- "Activate/Deactivate RDS
frequency following" ,
- "Activate/Deactivate regional
mode" ,
- "Activate/deactivate Radio
Text display" , broadcast by the
radio station if available ("RT" is
displayed at the bottom of the
screen).
- "Activate/deactivate CD details
display" , also permits MP3
display.

52 -Audio equipment and telematics
01-10-2005
53
-Audio equipment and telematics
01-10-2005
Contextual menu
By pressing knob
G, the contextual
menu allows you to access the
following functions:
- "Inputting a frequency" ,
- "List of stations" to access
the 30 stations picked up locally
directly,
- "Refresh list" to update this list,
- "Display Radio Text" broadcast
by the radio station if it is available
("RT" is displayed at the bottom of
the screen).
When you are in radio mode,
pressing knob G enables you to
call up the Radio contextual menu
to select "Read Radio Text"
(information broadcast by the station
concerning the programme to which
you are listening) (example: name of
singer, title of the song...).COMPACT DISC
Selecting CD mode
After inserting a disc, printed face
upwards, the CD drive starts auto-
matically.
If a disc has already been inserted,
press the "SOURCE" button to
select CD mode. Selecting a track
Press button
M to select the following
track.
Press button N to return to the start
of the current track or to select the
previous track.
Press several times in succession to
skip several tracks.
Press button B to
eject the disc from the
drive.
If the CD is not
removed within 10 to 15 seconds
following ejection, it is re-inserted
into the drive automatically but is not
played.
Ejecting a disc Accelerated play
Press and hold button M or N for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Notes:
• Before inserting a CD, press
button B to check that the drive
does not already contain a CD.
• When the navigation CD is in the drive, it is not possible to listen to a
CD in CD mode .

52 -Audio equipment and telematics
01-10-2005
53
-Audio equipment and telematics
01-10-2005
Contextual menu
By pressing knob
G, the contextual
menu allows you to access the
following functions:
- "Inputting a frequency" ,
- "List of stations" to access
the 30 stations picked up locally
directly,
- "Refresh list" to update this list,
- "Display Radio Text" broadcast
by the radio station if it is available
("RT" is displayed at the bottom of
the screen).
When you are in radio mode,
pressing knob G enables you to
call up the Radio contextual menu
to select "Read Radio Text"
(information broadcast by the station
concerning the programme to which
you are listening) (example: name of
singer, title of the song...).COMPACT DISC
Selecting CD mode
After inserting a disc, printed face
upwards, the CD drive starts auto-
matically.
If a disc has already been inserted,
press the "SOURCE" button to
select CD mode. Selecting a track
Press button
M to select the following
track.
Press button N to return to the start
of the current track or to select the
previous track.
Press several times in succession to
skip several tracks.
Press button B to
eject the disc from the
drive.
If the CD is not
removed within 10 to 15 seconds
following ejection, it is re-inserted
into the drive automatically but is not
played.
Ejecting a disc Accelerated play
Press and hold button M or N for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Notes:
• Before inserting a CD, press
button B to check that the drive
does not already contain a CD.
• When the navigation CD is in the drive, it is not possible to listen to a
CD in CD mode .

52 -Audio equipment and telematics
01-10-2005
53
-Audio equipment and telematics
01-10-2005
Contextual menu
By pressing knob
G, the contextual
menu permits you to switch the
following functions on or off:
- playing of the start of a track ("Introscan"),
- random play ("Random"),
- programming of the track playing order,
- list of tracks.
Do not use copied CDs as
these could damage your
player.
Insert circular compact
discs only. Playing MP3 CDs
Following the insertion of an MP3
CD, playing of the irst song of the
irst MP3 directory begins. You can
select the track to be played using
buttons
M or N or the MP3 directory
using buttons H or I.
Note: when the navigation CD is in
the drive, it is not possible to listen to
an MP3 CD in CD mode . MP3 contextual menu
Selecting a track
To display the list of MP3 directories,
press the MODE button to enter MP3
mode. When the knob G is pressed,
the contextual menu permits
displaying of the "list of tracks".In MP3 mode, pressing the knob
G
enables you to switch the following
functions on or off:
- Playing of the start of each track on the CD ("Introscan").
- Random play ("Random").
- Repeating of the tracks in the current MP3 directory.
- List of MP3 tracks.
This equipment enables you to listen
to music which is usually protected
by copyright in accordance with
current national and international
regulations.
Please refer to these regulations and
comply with them.
The playing and displaying of an
MP3 compilation may depend on the
recording programme and / or the
parameters used.
We recommend use of the ISO 9660
recording standard.
Using buttons
H or I,
select the MP3 direc-
tory to be played.
To open an MP3 di-
rectory, press knob G.
Using buttons M or N, select the
track to be played.
Conirm by pressing knob G.

54 -Audio equipment and telematics
01-10-2005
55
-Audio equipment and telematics
01-10-2005
COMPACT DISC CHANGER
Selecting CD changer mode
Press the
"SOURCE" button several
times. Selecting a track
Press button
M to select the following
track.
Press button N to return to the start
of the current track or to select the
previous track.
Press several times in succession to
skip several tracks. Contextual menu
By pressing knob
G, the contextual
menu permits you to switch the
following functions on or off:
- playing of the start of the track ("Introscan"),
- random play ("Random"),
- programming of the track playing order,
- list of tracks.
Selecting a disc
Press one of the buttons "1" to "5"
on the audio/telephone to select the
appropriate disc. Accelerated play
Press and hold button
M or N for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Buttons
H and I allow
you to select respec-
tively the previous or
following disc in the
changer.
Playing of the irst
track on the disc
begins automatically.
Following each change of source, on
returning to CD changer mode, play
will resume where it stopped.

54 -Audio equipment and telematics
01-10-2005
55
-Audio equipment and telematics
01-10-2005
TELEPHONE
This function is a
GSM dual-band
telephone (900 and 1 800 MHz)
incorporated in the RT3 GPS audio/
telephone system.
It is a "hands free" telephone. This
function is provided by a microphone
located next to the front courtesy
light, the speakers, a steering
column control and voice commands
which allow access to most of the
functions (the audio/telephone
control panel buttons allow access to
all the functions).
Display of the principal "mobile" type
functions, as well as consultation of
the indexes, is provided by the multi-
function display.
This function is active , whatever
position the ignition key is in even
after thirty minutes, when the
message "Economy mode active"
appears on the multi-
function
display. "Telephone and telematic
services" menu
Press the
MENU button then, using
the knob G, select the "Telephone
and telematic services" application
and conirm to gain access to the
following options:
- "Call" .
- "Service" , permits access to the
PEUGEOT services.
- "Telephone functions" , permits
setting of all of the telephone
functions.
- "Text messages (SMS)" , permits
management of all of the functions
for the text messages (SMS). Contextual menu
Press button
D to display the
telephone contextual menu.
This menu enables you to gain
access to the following functions:
- "List of calls" .
- "Enter number" .
- "Access to directory" .
- "Access to your voice mail"
(message service of your GSM
operator).
Note:
Do not allow yourself to become
distracted when you are behind
the wheel and comply with current
national legislation. The driver is
advised to stop in order to hold a
telephone conversation or carry out
certain actions (manual dialling of a
number, for example).

56 -Audio equipment and telematics
01-10-2005
57
-Audio equipment and telematics
01-10-2005
Within each menu:
Move around and se-
lect a function by turn-
ing the G button then
validate by pressing
the button. Using the alphanumeric keypad
For a given button, to input a character
in the second or subsequent rows
press until you obtain the character
required.
Buttons Associated characters
[1]
1 or space
[2] 2 or A B C 2 or a b c 2
[3] 3 or D E F 3 or d e f 3
[4] 4 or G H I 4 or g h i 4
[5] 5 or J K L 5 or j k l 5
[6] 6 or M N O 6 or m n o 6
[7] 7 or P Q R S 7 or p q r s 7
[8] 8 or T U V 8 or t u v 8
[9] 9 or W X Y Z 9 or w x y z 9
[0] 0 or + (long press)
[#] # or validation
[*] * or erasing of last character
input (long press)
Cancel an operation using the
"ESC"
button.
Using the menus, example
"Telephone functions"
Press the
"MENU" button to
display the general menu . Select
the "Telephone and telematic
services" application, validate
"Telephone functions" to access
the principal telephone functions,
then the various menus, in order to
reach the one required.
This menu allows you to access the
following functions:
- "Network": allows you to select
the network search mode and to
see the networks available.
- "Duration of calls": allows you
to consult the duration recorder of
calls made and zero re-set.
- "Process the PIN code": allows
you to use or modify the PIN code.
- "Call options": allows you to
conigure the calls with entering of
my number, automatic answering
after X rings, speciication of ring
options and allows you to conigure
the diversion number for the text
messages and clear the list of calls
and the text messages.

56 -Audio equipment and telematics
01-10-2005
57
-Audio equipment and telematics
01-10-2005
Installing the SIM card
Open lap L
by pressing the point
of a pencil on the circular opening
above the lap.
Insert your SIM card, available from
a mobile telephone operator, as
indicated in the graphics, then close
the lap.
Note: removal or insertion of the
SIM card must only be carried out
after the RT3 audio/telephone has
been switched off (key in position S
(ignition switch) and screen off).
If you have a duplicate card, when
carrying out the irst installation or to
update your directory you must insert
your mobile telephone’s SIM card
then transfer its information to the
RT3 audio/telephone directory - refer
to the Directory main menu. Input your PIN code using the
alphanumeric keypad and validate
by pressing button G
or button #
to access the network. Connection
to the network is validated by the
appearance of a symbol on the
screen.
Warning: if you make three errors in
succession when inputting your PIN
code, your SIM card will be blocked.
To unblock it, you will need to input
the PUK code. The PUK code will be
supplied to you by the person selling
your SIM card (input of the PUK code
allows for 10 errors in succession;
after this the SIM card becomes
permanently unusable).
Note: the PIN code is required
each time the ignition is switched
on, unless the PIN code has been
stored in the memory or protection
by PIN code is not activated on the
SIM card.
Inputting the PIN codeCancelling of PIN code request
In the menu "Telephone functions"
select "Process the PIN code" , then
validate the "Cancel" function.
Warning: in this case, do not lose
your SIM card. Losing it would mean
anyone who inds it would be able to
make unlimited calls.