Peugeot 206 SW Dag 2005.5 Manual PDF

66 -Audio equipment and telematics
01-10-2005
67
-Audio equipment and telematics
01-10-2005
The last voice message recall
control
Pressing for more than two seconds
on the button at the end of the
lights stalk repeats the last voice
information.
The control keypad Rotation of the dial:
This allows you to
move round the
screen and thus select a function.
It also allows you :
- with a "setting" type parameter,
after selection, to increase or
decrease the value,
- with a "list" type parameter, to
open the list and scroll through
the values.
- with map guidance, to increase the
zoom .
Pressing the dial:
This allows:
- access to the list of controls (contextual menu) of the permanent
display, if there is no other display
superimposed.
- conirmation of the selected
function or the modiied value.
- selection of a "setting" or "list"
type parameter for modiication. "MENU" button:
- brief press: access to the
general
menu.
- press for more than two seconds: displaying of a help menu with
the list of voice commands, a
description of the version of your
equipment, a demonstration mode
and the status of the services.
"MODE" button:
- brief press: modiication of perma-
nent display (audio system, naviga-
tion / guidance...),
"ESC" button:
- brief press: cancelling of operation
in progress or erasing of last
superimposed display.
- pressing for more than two sec- onds: erasing of all superimposed
displays and return to the perma-
nent display.
This lets you select and validate the
functions, controls and programmes
displayed.

66 -Audio equipment and telematics
01-10-2005
67
-Audio equipment and telematics
01-10-2005
General notes on the display
During navigation, if the navigation
CD ROM is present, the screen
indicates the manoeuvres to be
carried out:
1.
During navigation: manoeuvre
to be carried out or, temporarily,
course to be followed.
2. Next manoeuvre to be carried
out.
3. Next road to be taken and name
of the town.
4. Current road and name of the
town.
5. Symbol concerning the
Trafic Information or the local
services*.
6. Estimated time of arrival at
destination (based on free-
lowing trafic).
7. Distance to inal destination.
8. Distance to next manoeuvre. General menu
Switch on the RT3 GPS audio/
telephone and insert the navigation
CD ROM.
Press the
"MENU" button to access
the general menu .
Select the Navigation/Trafic Infor-
mation icon using the dial G, then
validate by pressing the dial to ac-
cess the main "Navigation - Trafic
Info" menu.
Notes:
Depending on the situation of
the vehicle and the reception of
GPS information, this information
may disappear from the screen
temporarily.
In Navigation display mode, a
long press of the "Menu" control
permits access to the activation of
a demonstration of the Navigation
function of your RT3 GPS audio/
telephone.
Next, select a destination using the
Navigation Menu. After entering, start
the Navigation to display a simulation
of the movement of your vehicle.
The starting point will be either the
current location of the vehicle or the
last known location. It is possible to
enter an alternative starting point via
the demonstration menu.
This demonstration may enable you
to visualise a journey that you wish
to make in the near future.
*
According to screen.

68 -Audio equipment and telematics
01-10-2005
69
-Audio equipment and telematics
01-10-2005
The main
"Navigation - Trafic
Info" menu offers various options
for activation or management of
guidance:
- "Select a destination".
- "Stages and routes".
- "Guidance options".
- "TMC trafic information".
- "Stop guidance".
Once guidance has been started, a
display warns you about use of the
navigation. If you accept its content,
press G. Observe current road
indications.
Navigation - Trafic Information
The "Select a destination" menu
offers various options for reaching a
destination:
- "Entering an address".
- Select a "service" available in a
town (restaurant, airport, hotel,
cinema, theatre, etc.).
- Select a destination stored in a "directory" .
- Select one of the twenty "previous
destinations" .
Selecting a destination
The last guidance address is
displayed.
Select and validate in succession the
entry zones "Town", "Road" , then
"N°" to ill them in.
The "OK" function permits validation
of the address and access to the
guidance activation function.
The "Store" function permits
recording of the address in a
directory ile.
The "Curr. loc" function permits
display of the current address.
The " GPS" function permits selection
of the GPS coordinates.
Entering an address

68 -Audio equipment and telematics
01-10-2005
69
-Audio equipment and telematics
01-10-2005
To enter the name of a town, select
each letter by turning the dial, then
validate each letter by pressing the
dial.
If an error is made entering the
letters, the
"Change" function
permits erasing of the last letter
entered.
Note: following the validation of a
letter, only those which could make
up a name existing in the database
appear.
As letters are entered, the "List"
function indicates the number of
towns beginning with the same
letters. Activation of this function
permits selection of a town from the
list.
When the list contains fewer than
six names, these are displayed
automatically. Select a town then
validate by pressing the dial.
When the complete name of the town
is displayed, select the "OK" function
then conirm by pressing the dial.
Note: once the town has been
entered, you can conirm by pressing
"OK" . You will then be guided to the
centre of this town automatically.
Entering the name of the town Entering the name of the road
Enter the name of the street in the
same way as the name of the town.
When the full name of the street is
displayed, select the "OK" function
then conirm by pressing the dial.
Note: do not enter the type of road
(road, avenue, etc.).
Enter the number of the street
previously entered.
Select the "OK" function, then
conirm by pressing the dial.
Note: if the number of the street
entered is not available, it is
rejected.
You can also select a street from the
"Junctions" function, which avoids
having to enter the street number.
Note: if the street selected does not
have a number, the list of junctions is
displayed automatically.
The full destination is displayed.
Select the "OK" function, then
conirm by pressing the dial to
access the guidance activation
function. Follow the instructions
given by the system.
Entering the number of the road
or junction
Entering the town and road using
the alphanumeric keypad
Press the numeric key which
corresponds to the letter required
until the letter appears on the screen,
then conirm by pressing the # key
after each letter.
If you make an inputting error, press
the * button to correct the last letter
entered.

70 -Audio equipment and telematics
01-10-2005
71
-Audio equipment and telematics
01-10-2005
The last address entered is
displayed.
There are 3 options for deining the
location around which you wish to
obtain a service:
• Accept the last address entered by
conirming the " OK" function.
• Enter the name of another town then conirm the road (optional).
• Automatically display the name of your current location using the "Curr. loc " function.
Selecting a service
If you wish to be directed to a service,
select the category of service and
conirm.
The list of services in the category
selected is displayed. Select then
conirm the required service to gain
access to selection of the location.
An indication in the (X/n) band
indicates whether there are several
establishments (n = maximum)
offering the same service within a
radius, as the crow lies, of 30 miles
(50 km) of the chosen location.
Use the functions "<<", " >>" or " <",
" > " to consult the list offered.
When the establishment of your
choice is displayed, you can select:
- " OK " to activate guidance to this
service.
- " Store " to add to your directory.
- " Contact " to call the service.
Note:
If the service selected is not available
in the programmed location, a
message will inform you of this.
Following conirmation of the
location, the service nearest to it is
displayed. The distance indicated is
the distance to it as the crow lies.
The most recent destinations are
shown.
There are three possible methods
of deining the location to which you
wish to travel:
- accept the last details input by means of the "OK" function,
- input the details of your destina- tion,
- automatically input the details of your current location by means of
the "Curr. loc." function.
GPS details

70 -Audio equipment and telematics
01-10-2005
71
-Audio equipment and telematics
01-10-2005
Select the
''Directory'' function to
access the ile in which the address
you are looking for is archived.
Select a description by scrolling
down the list by means of the dial,
then conirm by pressing the dial.
The directory ile is then displayed.
Select the "OK" function, then press
the dial to access the guidance
activation function.
Follow the directions given by the
system.
Selecting a destination stored in
the directory
Select the "Previous destinations"
function to access one of the last
twenty addresses stored.
Select a description by scrolling
down the list by means of the dial,
then conirm it by pressing the
dial. The complete address is then
displayed.
Select the "OK" function, then press
the dial to access the guidance
activation function.
Follow the instructions given by
the system.
Selection of one of the previous
destinations
- "Add a stage" to your route after
starting guidance.
- "Order or delete stages" .
- "Divert route" . You must indicate
the number of miles (kilometres)
that you wish to avoid to permit the
calculation of a new route.
- Select the initial "Chosen
destination" in order to change it.
Note: if a stage is programmed, the
navigation system will always try to
pass via this stage until you have
gone through it or deleted it.
Stages and routes

72 -Audio equipment and telematics
01-10-2005
73
-Audio equipment and telematics
01-10-2005
-
"Deine the calculation criteria"
for your route so that it is the
fastest, the shortest, takes account
of the trafic information, etc... The
last criteria selected are displayed.
- "Set the voice synthesiser" ,
set the volume of the guidance
instructions.
- "Activate/deactivate road
names" , set the pronunciation in
the spoken instructions.
- "Description of the CD ROM" , to
display the Navigation CD ROM
information.
- "Delete the previous destina-
tions" .
Guidance options
The last criterion used is displayed.
Select a criterion from the list, then
validate by pressing the dial.
When the criterion of your choice
has been selected, select the "OK"
function then conirm by pressing
the dial.
Calculation criteria Management of the directory
This function enables you to rename
an address stored in the directory.
Select the description correspond-
ing to the stored address to be
changed.
Select the "Rename" function, then
conirm by pressing the dial.
Select the "OK" function, then
conirm by pressing the dial to record
the changes made.
Stopping / Resuming guidance
"Stop guidance"
During guidance, select this function
then validate.
"Resume guidance"
In the absence of guidance, select
this function then validate to activate
guidance to the last destination
programmed.
Note: after re-starting the engine,
a screen appears enabling you to
resume guidance activated before
the ignition was switched off.

72 -Audio equipment and telematics
01-10-2005
73
-Audio equipment and telematics
01-10-2005
The contextual menu associated
with the
"Navigation - Trafic
Info" application appears as a
superimposed display, when this is
the application currently in use in the
main screen window.
This menu is limited to the following
functions:
- displaying of the map in "full screen" mode or downsized on
the right-hand side ("windowed
screen")*,
- changing of the initial route,
- storing of the current location (postal address if available or, if it
is not, the GPS co-ordinates of the
position),
- changing of the route "guidance criteria",
- stopping or resuming of guidance.
"Navigation - Trafic Info"
contextual menu
TMC (Trafic Message Channel)
RDS Trafic Information
The RT3 GPS audio/telephone
permits access to the TMC RDS
trafic information which is broadcast
free of charge on the FM waveband.
This function enables you to receive
messages regarding the trafic
conditions (accidents, trafic jams,
weather, ...).
They may appear temporarily as a
superimposed display or be read by
the voice synthesiser, if it is active.
You can read the messages
broadcast by the TMC station while
listening to another station.
In map mode, special TMC symbols
are displayed depending on the type
of information*.Select the
"TMC Trafic Information"
function from the "Navigation /
Trafic Info" menu:
- "Consult the messages" to
display the list of TMC messages
available,
- "Filter the TMC information"
to select a type of message and
initialise the TMC station,
- "Voice synthesis" to listen to the
TMC messages received,
- "Activate/Deactivate message
presentation" to display/not
display the TMC messages
received.
* According to screen.

74 -Audio equipment and telematics
01-10-2005
75
-Audio equipment and telematics
01-10-2005
Filtering of the TMC messages
To ilter these messages, select
the
"Filter the TMC info" function
from the "TMC Trafic Information"
menu, the screen then shows:
- "Activate/deactivate the ilter
according to route" , in navigation
mode, this permits the selection
of events located on the guidance
route and in the direction of travel
only.
- "Filter by event" , permits selection
of the required kinds of event only
(all selected by default).
- "Geographical ilter" , permits
selection of the events located
around the vehicle and/or around
a given location. The various ilters
can by used simultaneously.
- " Selection of the TMC station" ,
permits the selection of another
station indicating that it broadcasts
RDS-TMC information.
You can ilter these messages using
one or more ilters simultaneously. Filter by event
This choice enables you to select the
kinds of event about which you wish
to be informed:
- Those classiied as road-related
such as trafic, road closures or
vehicle restrictions and/or,
- Those concerning the town in which you are located such as
parking, public transport and
demonstrations.
Access to this information depends
on its availability.
Note: if you do not select any events,
you will not receive any TMC trafic
information. Geographical ilter
This choice enables you to select the
events zone (radius of 1 to 125 miles
(3 to 200 km) about which you wish
to be informed:
- events which are taking place
around your vehicle and/or,
- events in a location to be selected.
The two ilters can be used
simultaneously. In this case, the
radius is the same for both.
We recommend a ilter according to
the route and a geographical ilter
around the vehicle:
- of 3 miles (5 km) or 6 miles (10 km) for a region with heavy trafic,
- of 12 miles (20 km) for a region with normal trafic,
- of 60 miles (100 km) for long journeys (motorway).

74 -Audio equipment and telematics
01-10-2005
75
-Audio equipment and telematics
01-10-2005
DISPLAY FLOW CHARTS skating rinks, bowling alleys winter sports centres parks & gardens theme parks transport & automobile ports, airports station, bus stations automatic checks vehicle hire automatic checks service stations, garagesŽ directory nav directory town, street, n° okŽ previous destinations  list of destinations town, street, n° ok STAGES AND ROUTESŽ add a stage enter an address town street junction n° gps‘ longitude‘ latitude choice of a service administration & security hotels, restaurants & businesses culture, tourism & shows sports centres & outdoor pursuits transport & automobile directory nav directory‘ town, street, n°‘ ok previous destinations  list of destinations‘ town, street, n°‘ okŽ order / delete stagesŽ divert route divert route over 2 km
 the best diversion possible is 3km.
continue?
 range 1-50 okŽ chosen destination town, street, n° change GUIDANCE OPTIONŽ deine the calculation criteria the fastest the shortest distance / time with tolls with ferry  trafic infoŽ adjust speech synthesis volume activate / deactivateŽ activate / deactivate street namesŽ description of the cd-romŽ delete the previous destinations do you want to delete the list of previous destinations?
 yes / no TMC TRAFFIC INFORMATIONŽ consult the messagesŽ ilter the TMC trafic information activate / deactivate the route ilter ilter by event trafic information‘ trafic information‘ road closures‘ size restrictions‘ road conditions‘ weather & visibility urban information‘ parking‘ public transport‘ demonstrations geographical ilter around the vehicle around a place / select ilter radius 50 km  choice of TMC station  station name
ΠMAIN FUNCTION
 CHOICE AŽ choice A1Ž choice A2 CHOICE B...
ΠNAVIGATION / TRAFFIC INFO
 CHOICE OF DESTINATIONŽ enter an address town  street junction n°  gps longitude latitudeŽ choice of a service administration & security town halls, town centre universities, colleges hospitals hotels, restaurants & businesses hotels restaurants vinyards business centres supermarkets, shopping craft centres culture, tourism & shows tourism, historical monuments culture, museums & theatres shows & exhibitions casinos & nightlife cinemas sports centres & outdoor pursuits sports centres, complexes golf courses