Peugeot 206 SW Dag 2006.5 Owner's Guide

33Audio equipment and telematics-
RADIO
Notes on radio reception
Your car radio is subject to pheno-mena which do not affect domestic radio sets. Both AM (MW/LW) and FM reception are subject to various forms of interference. This is no reflection on the quality of the equipment, but is due to the nature of the signals and the way in which they are transmitted.
On MW/LW, interference may be no-ticed when passing under high volt-age power lines or bridges, or in tun-nels.
On FM, interference may be the result of increasing distance from the trans-mitter, deflection of the signals by ob-stacles (mountains, hills, buildings, etc.), or of being in an area which is not covered by a transmitter.
Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound distribution (Fader)
When "FAD" is displayed, press but-ton I or J.
Button I increases the volume in the front.
Button J increases the volume in the rear.
Adjusting the right/left sound distribution (Balance)
When "BAL" is displayed, press but-ton I or J or or.
Button I increases the volume on the right-hand side.
Button J increases the volume on the left-hand side.
Automatic volume correction
This function enables the volume to be automatically adjusted depending on the level of noise produced by the speed of the vehicle.
Press buttons I or J to switch the function on or off.
Press button R.
Briefly press button R to select the FM1, FM2, FMast and AM wavebands.

33Audio equipment and telematics-
RADIO
Notes on radio reception
Your car radio is subject to pheno-mena which do not affect domestic radio sets. Both AM (MW/LW) and FM reception are subject to various forms of interference. This is no reflection on the quality of the equipment, but is due to the nature of the signals and the way in which they are transmitted.
On MW/LW, interference may be no-ticed when passing under high volt-age power lines or bridges, or in tun-nels.
On FM, interference may be the result of increasing distance from the trans-mitter, deflection of the signals by ob-stacles (mountains, hills, buildings, etc.), or of being in an area which is not covered by a transmitter.
Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound distribution (Fader)
When "FAD" is displayed, press but-ton I or J.
Button I increases the volume in the front.
Button J increases the volume in the rear.
Adjusting the right/left sound distribution (Balance)
When "BAL" is displayed, press but-ton I or J or or.
Button I increases the volume on the right-hand side.
Button J increases the volume on the left-hand side.
Automatic volume correction
This function enables the volume to be automatically adjusted depending on the level of noise produced by the speed of the vehicle.
Press buttons I or J to switch the function on or off.
Press button R.
Briefly press button R to select the FM1, FM2, FMast and AM wavebands.

Audio equipment and telematics34 -
Manual station search
Press the "MAN" button.
Briefly press button L or N to in-crease or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops as soon as the button is released.
Pressing the "MAN" button again returns you to automatic station search.
Automatic storing of FM stations in the memory (autostore)
Your radio automatically stores the 6 stations with the strongest signal in FM. These stations are stored in the FMast waveband.
If it is not possible to find 6 stations, the remaining memories are empty.
Automatic station search
Manual storing of stations in the memory
Select the station required.
Press one of the buttons "1" to "6"for more than two seconds.
The sound stops then becomes audi-ble again, confirming that the station has been stored in the memory.
Press and hold button R for more than two seconds.
Recalling stations stored in the memory
For each waveband, briefly press buttons "1" to "6" to recall the cor-responding station.
Briefly press button L or N to search for the station immediately above or below. By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first sta-tion found as soon as the button is released.
If the TA traffic programme is select-ed, only stations broadcasting this type of programme are selected.
Searching for a station occurs first in "LO" sensitivity (selection of the most powerful transmitters) during scan-ning of the waveband, then in "DX" sensitivity (selection of the weakest and most distant transmitters).
To make a direct search in "DX" sen-sitivity, press button L or N twice.

35Audio equipment and telematics-
RDS
Using the RDS (Radio Data System) function on FM
Radio Data System allows you to continue listening to the same sta-tion, whatever frequency it is using for the region you are going through.
Traffic information programme (TA)Regional following mode
When they are part of a network, cer-tain stations broadcast regional pro-grammes in the various areas they serve. With regional following mode you can keep listening to the same programme.
Press the "RDS" button for more than two seconds to switch the function on or off.
RDS station following
The display indicates the name of the station selected. The radio is continu-ally searching for the station which has the best reception and which is transmitting the same programme.
Press the "TA" button to switch the function on or off.
The multifunction dis-play will show:
- "TA" if the function is selected,- "(TA)" if the function is selected but not available.Any traffic information flash will be given priority, whatever source you are listening to (radio, CD or CD changer).
If you wish to interrupt a message, press the "TA" button; this switches the function off.
Note: the volume of traffic informa-tion is independent of the volume of normal radio listening. You can adjust it using the volume button. The setting will be stored and will be used when the next messages are broadcast.
Briefly press the "RDS" button to switch the function on or off.
The multifunction display will show:
- "RDS" if the function is selected.- "(RDS)" if the function is selected but not available.

Audio equipment and telematics36 -
EON system
This connects stations which are part of the same network. It enables the broadcast of traffic information or a PTY programme, by a station that is PTYPTYpart of the same network as the sta-tion to which you are listening.
This service is available when you have selected the TA traffic informa-tion programme or the PTY function.PTYPTY
Search by typeof programme (PTY)
This allows you to listen to stations broad-casting a specific type of programme (news, culture, sport, rock, etc.).
To search for a PTY programme:PTYPTY
With FM selected, press the "TA" button for two seconds to switch this function on or off.- select the PTY function,PTYPTY- briefly press button L or N to scroll down the list of the various types of programmes offered.- when the programme of your choice is displayed, keep button L or Npressed for two seconds to carry out an automatic search (after an automatic search the PTY function PTYPTYis switched off).
In PTY mode the different types PTYPTYof programme can be stored in the memory. To do this, press the prese-lection buttons "1" to "6" for two sec-onds.
Briefly press the corresponding but-ton to recall the type of programme stored in the memory.

37Audio equipment and telematics-
Ejection of a disc
Selecting a trackShuffle (RDM)
When the CD player is selected, press and hold button Q for two se-conds. The tracks will be played in random sequence. Pressing the but-ton again for two seconds returns you to normal play.
Shuffle mode is de-activated each time the set is switched off.
COMPACT DISC
Selecting CD mode
Press button L to select the next track.
Press button N to return to the start of the current track or to select the previous track.
Accelerated play
Press and hold button L or N for forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
After insertion of a disc, printed face upwards, the player starts automatically.
If a disc is already inserted, press button Q.
Press button S to eject the disc from the player.
The use of copied com-pact discs may cause faults.
Insert circular compact discs only.

Audio equipment and telematics38 -
Selecting a track
Shuffle (RDM)
When the CD changer is selected, press and hold button P for two seconds.
The tracks will be played in random sequence. Pressing the button again for two seconds returns you to nor-mal play.
CD CHANGER
Selecting CD changer mode
Press button P.
Selecting a disc
Press buttons "1" to "5" on the radio to select the corresponding disc.
Accelerated play
Press and hold button L or N for forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Press button L to select the next track.
Press button N to return to the start of the current track or to select the previous track.
The use of copied com-pact discs may cause faults.
Insert circular compact discs only.

39Audio equipment and telematics-
RT3 GPS AUDIO/TELEPHONE
Stalk movementFunction
1 - Press (behind)Increase volume.
2 - Press (behind)Decrease volume.
1 + 2 - Press togetherSwitch off sound (mute); restore sound by pressing any button.
3 - Press
Automatic search of upper frequencies (radio) - Selection of following track (CD/MP3/CD changer).Continuous pressure until release: accelerated forwards play (CD/CD changer), rapid scanning of following tracks (MP3).
4 - Press
Automatic search of lower frequencies (radio) -Selection of previous track (CD/MP3/CD changer).Continuous pressure until release: accelerated backwards play (CD/C D changer), rapid scanning of previous tracks (MP3).
5 - Press endChange radio mode (radio/CD/MP3/CD changer/AUX) - Confirmation of se lection (on a menu or screen) - Call connect/Call disconnect (Tel./Incoming call) - Call disconnect (Tel./Engaged).Press for more than 2 seconds: display telephone contextual menu (Tel./Not engaged).
6 - Rotation(clockwise)
Selection of higher station stored in memory or storing in memory in position 1 for station not in memory (radio) - Selection of following CD - Selection of following MP3 directory - Selection offollowing item on a menu or screen.
7 - Rotation (anti-clockwise)
Selection of lower station stored in memory or storing in memory in position 6 for station not in memory (radio) - Selection of previous CD - Selecti on of previous MP3 directory - Selection ofprevious item on a menu or screen.

40 -Audio equipment and telematics
ButtonFunction
APress: audio/telephone on/off.Rotation: volume adjustment.
BEjection of CD.
C SOURCESelection of source: radio, CD,MP3, CD changer or AUX.
DCall connect (Tel./Incoming call) - Display contextual menu (Tel./Not engaged).
EAccess "PEUGEOT" services menu (if the options and services are available).
F MODEChange display.
G
Press: display contextual menu of display - Confirm inputting or adj ustment.
Rotation: move within a menu - Select function/parameter - Audio settings: sound ambience, bass, treble, loudness, fader (front/rear balance), balance (left/right balance), automatic volume.
H
Adjust higher frequency, step by step or continuous (long press).
Select previous MP3 directory (MP3).
Select previous CD (CD changer).
I
Adjust lower frequency, step by step or continuous (long press).
Select following MP3 directory (MP3).
Select following CD (CD changer).
JInfrared window (IrDA).
K ESCCancel current operation.
LSIM card cover.
M
Automatic search of higher frequency - Selection of following CD track.
Double press: change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated forwards play (CD/CD ch anger), rapid scanning of the following tracks (MP3).

41
-Audio equipment and telematics
ButtonFunction
N
Automatic search of lower frequency - Selection of previous CD track.Double press: change from LO mode to DX mode.Press for more than 2 seconds: CD accelerated backwards play (CD/CD cha
nger), rapid scanning of the previous tracks (MP3).
O DARK1st press: display top band (remainder of screen is black) - 2nd press: brightness removed (black screen) - 3rd press: return to normal scre en.Press for more than 10 seconds: reinitialisation of the system.
P MENUDisplay general menu - Press for more than 2 seconds: display help screen with list of voice commands, a description of the version of your equipment, a demonstration mode and the status of the services.
QDisconnect.
RBAND
ASTSelect FM1, FM2, FMast, AM wavebands.Press for more than 2 seconds: automatic storing of stations (autosto re).
S TA/PTYTraffic information priority on/off.Press for more than 2 seconds: PTY function on/off.
T RDSRDS function on/off.Press for more than 2 seconds: regional following mode on/off.
U AUDIODisplay window for adjusting sound ambience, bass, treble, loudness, sound distribution and automatic correction of volume.
V SOSPress between 2 and 8 seconds: emergency call.
1 to 61 2 3 4 5 6Select station in memory.Press more than 2 seconds: store station being listened to in me mory.
1 to 51 2 3 4 5Selection of CDs in the CD changer.
0 to 9 * #0 1 2 3 4 5
6 7 8 9 * #Alphanumeric keypad for entering text and telephone numbers.