Peugeot 206 SW Dag 2006.5 Service Manual

42 -Audio equipment and telematicsSELECTING THE SOURCE
Press the SOURCE button to selectthe audio source: RADIO, CD, CD CHANGER, MP3 or audio/video auxiliary input (AUX)*.
GENERAL MENU
Pressing button "P" provides access to all of the functions available on the RT3 GPS audio/telephone:
"Navigation - Traffic info".
"Audio functions".
"Directory".
"Telephone and telematic services".
"Configuration" of your vehicle.
"Map"*.
"Video"*.
SCREEN
In accordance with your selections, the screen displays the information relating to the Navigation - Traffic In-formation, Audio, Directory, Telephone and Telematic Services, Configura-tion*, Map* and Video* functions.
It is possible to change the infor-mation displayed on the right-hand side of your screen by pressing "F", "G", "P" and "U", or using the voice commands.
The information on the left-hand side and at the top of the screen depends on the selection made for the right-hand side.
Some information and actions (warning, settings, contextual menu) are indicated by the temporary opening of a window on the screen.MOVING WITHIN THE MENUS
Buttons "G", "H", "M", "I", "N" en-able you to move within the menus and pressing button "G" confirms your selections.
We recommend that you do not use the RT3 GPS audio/telephone but-tons while driving. In some countries, certain buttons may be deactivated (in accordance with national legislation).
* According to screen.
Auxiliary Input (AUX)*
The auxiliary input allows the con-nection of portable equipment (MP3 player, ...).
 Activate the auxiliary input via the "Configuration" menu, then "Sound" and finally "Activate aux input".
 Connect the portable equipment to the audio sockets (white and red, type RCA) located in the glove box.
 Press the SOURCE button suc-cessively and select AUX.

43
-Audio equipment and telematics
GENERAL FUNCTIONS
On/off
With the ignition switch in the accessories/run-ning position or with the ignition on, press button A to switch the audio function of the RT3 GPS audio/tele-phone on or off.
Note:in the absence of an ignition key, press button A to switch the telematics system on or off.
The RT3 GPS audio/telephone can operate for 30 minutes without switching the vehicle ignition on.
ADJUSTING THE VOLUME
Turn button A clockwise to increase the volume of the audio/telephone or anti-clockwise to decrease it.
Anti-theft system
The RT3 GPS audio/telephone is coded in such a way that it can operate only on your vehicle. If fitting it to another vehicle, consult your PEUGEOT dealer for configuration of the system.
The anti-theft system is automatic and requires no action on your part.
MUTE
Notes:
- the SIM card must be removed only after the audio/telephone has been switched off,- following automatic switching off of the audio/telephone after 30 minutes it is possible to make a telephone call by pressing button D,- after the ignition has been switched off, the audio/telephone can be switched on again by pressing but-tons D, E, V or by inserting a CD in the player.
AUDIO SETTINGS
Press button U to access the Sound Ambience, Bass, Tre-ble, Loudness, Fader(front/rear balance), Balance(left/right balance) andAutomatic volume adjustment setting windows.
Exit from audio mode is automatic af-ter a few seconds without any action, or by pressing the "ESC" button.
Note: bass, trebleand loudness set-tings are specific to each source. It is possible to have different settings for radio, CD MP3, CD changer or AUX.
Notes
The volume setting is specific to each source. It is possible to have different settings for radio, CD, CD changer or AUX.
The volume is adjusted automatically in relation to the speed if the auto-matic volume function is active.
The volume when stationary will be the same the next time the audio equipment is switched on.
Use the control on the steering wheel to acti-vate this function.
The sound is cut off, re-gardless of which source is in use. The perma-nent audio sources (radio, CD, CD changer, MP3, auxiliary input) remain cut off but not the others (guidance instructions, for example).
To restore the sound, press one of the two volume buttons.
You can also increase or decrease the volume using the controls on the steering wheel.

44 -Audio equipment and telematics
Sound ambience
This function permits the selection of a "None", "Rock", "Clas-sical", "Jazz", "Vocal" or "Techno" sound ambience.
Turn button G to select the sound ambience.
Selecting "None" permits access to all of the settings defined below. Se-lecting another ambience sets the bass and treble automatically.
Bass setting
When "Bass" is displayed, turn button G to vary the setting.
- "-9" for minimum bass setting,- "0" for normal setting,- "+9" for maximum bass setting.
Treble setting
When "Treble" is displayed, turn button G to vary the setting.
- "-9" for minimum treble setting, - "0" for normal setting,- "+9" for maximum treble setting.
Adjusting the loudness
This function automatically empha-sises bass and treble tones when the volume is low.
Rotate button G to switch the func-tion on or off.
Setting the front/rear sound distribution (Fader)
When "Fader" is displayed:
- Turn button G clockwise to increase the volume in the front.- Turn button G anti-clockwise to increase the volume in the rear.
Setting the right/left sound distribution (Balance)
When "Balance" is displayed:
- Turn button G clockwise to increase the volume on the right.- Turn button G anti-clockwise to increase the volume on the left.
Automatic volume adjustment
This function allows the volume to be adjusted automatically depending on the level of noise produced by the speed of the vehicle.
Press button G to switch the function on or off.

45
-Audio equipment and telematics
RADIO
Notes on radio reception
Car radio/telephone receivers are subject to phenomena which do not affect domestic radio sets. Both MW/LW and FM are subject to various forms of interference. This is not a reflection on the quality of the equip-ment, but is due to the nature of the signals and the way in which they are transmitted.
On MW/LW interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the result of the increasing distance from the transmitter, deflection of the signals by obstacles (mountains, hills, build-ings, etc.) or of being in an area which is not covered by a transmitter.
Selecting the radio
Press "SOURCE" several times.
Automatic station search
Briefly press button M or Noror to search for the station immediately above or below.
The search stops at the first station found.
If the TA traffic programme is selected, only the most powerful stations broad-casting this type of programme are selected.
Selecting a waveband
Briefly press button "BAND/AST" to select the FM1, FM2, FMast and AM wavebands.
Search sensitivity
It is possible to carry out automatic searches at two levels of sensitivity:
- To tune in to the most powerful transmitters, select the local search mode "LO" (default option).- To tune in to the weakest or most distant transmitters, select the sensitive search mode "DX".The station search is carried out first in "LO" (local) sensitivity, then in "DX" (distant) sensitivity.
To make a direct search in "DX"(distant) sensitivity, press button M or N twice in succession.

46 -Audio equipment and telematics
Automatic storing of FM stations in the memory (autostore)
Recalling stations stored in the memory
For each waveband, briefly press the buttons "1" to "6" to recall the corresponding stored station.
In the case of an RDS station, the frequency appears for a few seconds before its name.
Recalling an RDS station may result in a search for the frequency which corresponds to the region through which you are travelling.
Press the "BAND/AST" button for more than two seconds.
Your audio/telephone automatically stores the 6 stations with the strong-est signal in FM. These stations are stored in the FMast waveband.
If it is not possible to find 6 stations, the remaining memories are empty.
Manual station search
Briefly press button H or I or orto increase or decrease the frequency displayed.
By continuing to press the button in the direction select-ed, you will obtain continuous scrolling of the frequency.
Scrolling stops when you release the button.
Manual station storing
Select the station required.
Press one of the buttons "1" to "6" for more than two seconds.
A window appears on the screen, the station is stored when it is displayed on the memory number that you have allocated to it.

47
-Audio equipment and telematics
RDS SYSTEM
Using the RDS (Radio Data System) function on FM
Most FM radio stations use the RDS system.
This system allows you to continue lis-tening to the same station, whatever frequency it is using for the region you are going through.
This screen indicates the name of the sta-tion selected. The au-dio/telephone continu-ously searches for the transmitter which transmits the same programme with the best reception. This search may cause slight interfer-ence with the transmission.
The function can be switched on or off via the "RDS" button or the "AUDIO FUNCTIONS" main menu.
The screen will show:
- "RDS" if the function is active and available for the station selected.- "RDS" crossed out or "RDS"greyed out on the screen* if the function is active but is not avail-able on the station.If the station to which you are listening does not have several frequencies in the region through which you are travelling, you can switch off the auto-matic frequency following.
Traffic information programme
Press the "TA/PTY"button to switch the function on or off.
The multifunction screen will show:
- TA if the function is selected,- TAcrossed out or greyed out* if the function is selected but not available.Any traffic information flash will be given priority, whatever source you are listening to (radio, CD or CD changer).
If you wish to interrupt the broad-casting of a message, press the "TA/PTY" button.
Notes: the volume of the traffic information is independent of the volume of normal audio/telephone listening.
You can adjust it by using the volume button. The setting will be stored and will be used when the next messages are broadcast.
You must be on the FM waveband.
During station search or automatic storing phases, if the "TA" function is selected, transmitters which are compatible with the broadcasting of these messages will be tuned to or stored first.
The station being listened to must indicate via the RDS system that it broadcasts traffic information.
Stations which are organised in a network (EON) have regional trans-mitters which broadcast their own programmes: you can listen to one of these stations and switch to the network station which broadcasts the traffic information messages.
RDS station following
Regional following mode (REG)
When they are part of a network, cer-tain stations broadcast regional pro-grammes in the various areas they serve. With regional following mode you can keep listening to the same programme.
You can choose to follow:
• Either a regional station only.• Or the entire network, with the possibility of listening to a different programme.The function can be switched on or off via the "AUDIO FUNCTIONS"main menu or by pressing the "RDS" button for more than 2 seconds.
The multifunction screen will show:
- REG if the function is active,- REG crossed out or greyed out* if the function is active but not available.
* According to screen

48 -Audio equipment and telematics
PTY function
This allows you to listen to stations broadcasting a specific type of pro-gramme, selected from the list of available types below:
NEWS SCIENCE
AFFAIRS VARIED
INFO POP M
SPORT ROCK M
EDUCATE EASY M
FICTION LIGHT M
CULTURE OTHER M
WEATHER LEISURE
FINANCE JAZZ
CHILDREN COUNTRY
SOCIAL NATION M
RELIGION OLDIES
PHONE IN FOLK M
TRAVEL DOCUMENT
When FM is selected, press button "TA/PTY" for more than two seconds to switch the function on or off.
To find a PTY programme:PTYPTY
- select the PTY button,PTYPTY- turn button G to scroll down the different types of programmes of-fered, then confirm your choice,when the programme of your choice is displayed press button M or N to carry out an automatic search (after an automatic search the PTY func-PTYPTYtion is switched off if no station has been found).
In PTY mode the different types of PTYPTYprogrammes can be stored in the memory. To do this, press the prese-lection buttons "1" to "6" for more than two seconds. To recall the type of programme stored in the memory,briefly press the corresponding button.
EON system
This system connects stations which are part of the same network. It ena-bles the broadcast of traffic informa-tion or a PTY programme, by a station that is part of the same network as the station to which you are listening.
The service is available when you have selected the TA traffic informa-tion programme or the PTY function. PTY PTY
Audio functions menu
Select the "Audio functions" menu from the general menu to:
- "Activate/Deactivate RDS frequency following",- "Activate/Deactivate regional mode",- "Activate/deactivate Radio Text display", broadcast by the radio station if available ("RT" is displayed at the bottom of the screen).- "Activate/deactivate CD details display", also permits MP3 display.

49
-Audio equipment and telematics
Contextual menu
By pressing knob G, the contextual menu allows you to access the fol-lowing functions:
- "Inputting a frequency",- "List of stations" to access the 30 stations picked up locally directly,- "Refresh list" to update this list,- "Display Radio Text" broadcast by the radio station if it is available ("RT" is displayed at the bottom of the screen).When you are in radio mode, pressingknob G enables you to call up the Radio contextual menu to select "Read Radio Text" (information broadcast by the station concerning the programme to which you are listening) (example: name of singer, title of the song...).
COMPACT DISC
Selecting CD mode
After inserting a disc, printed face upwards, the CD drive starts auto-matically.
If a disc has already been inserted, press the "SOURCE" button to se-lect CD mode.
Selecting a track
Press button M to select the following track.
Press button N to return to the start of the current track or to select the previous track.
Press several times in succession to skip several tracks.
Press button B to eject the disc from the drive.
If the CD is not re-moved within 10 to 15 seconds fol-lowing ejection, it is re-inserted into the drive automatically but is not played.
Ejecting a discAccelerated play
Press and hold button M or Noror for forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Notes:
• Before inserting a CD, press button B to check that the drive does not already contain a CD.• When the navigation CD is in the drive, it is not possible to listen to a CD in CD mode.

49
-Audio equipment and telematics
Contextual menu
By pressing knob G, the contextual menu allows you to access the fol-lowing functions:
- "Inputting a frequency",- "List of stations" to access the 30 stations picked up locally directly,- "Refresh list" to update this list,- "Display Radio Text" broadcast by the radio station if it is available ("RT" is displayed at the bottom of the screen).When you are in radio mode, pressingknob G enables you to call up the Radio contextual menu to select "Read Radio Text" (information broadcast by the station concerning the programme to which you are listening) (example: name of singer, title of the song...).
COMPACT DISC
Selecting CD mode
After inserting a disc, printed face upwards, the CD drive starts auto-matically.
If a disc has already been inserted, press the "SOURCE" button to se-lect CD mode.
Selecting a track
Press button M to select the following track.
Press button N to return to the start of the current track or to select the previous track.
Press several times in succession to skip several tracks.
Press button B to eject the disc from the drive.
If the CD is not re-moved within 10 to 15 seconds fol-lowing ejection, it is re-inserted into the drive automatically but is not played.
Ejecting a discAccelerated play
Press and hold button M or Noror for forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Notes:
• Before inserting a CD, press button B to check that the drive does not already contain a CD.• When the navigation CD is in the drive, it is not possible to listen to a CD in CD mode.

50 -Audio equipment and telematics
Contextual menu
By pressing knob G, the contextual menu permits you to switch the fol-lowing functions on or off:
- playing of the start of a track ("Introscan"), - random play ("Random"), - programming of the track playing order,- list of tracks.
Do not use copied CDs as these could damage your player.
Insert circular compact discs only.
Playing MP3 CDs
Following the insertion of an MP3 CD, playing of the first song of the first MP3 directory begins. You can select the track to be played using buttons M or N or the MP3 directory using buttons H or I.
Note: when the navigation CD is in the drive, it is not possible to listen to an MP3 CD in CD mode.
MP3 contextual menu
Selecting a track
To display the list of MP3 directories, press the MODE button to enter MP3 mode. When the knob G is pressed, the contextual menu permits display-ing of the "list of tracks".
In MP3 mode, pressing the knob Genables you to switch the following functions on or off:
- Playing of the start of each track on the CD ("Introscan").- Random play ("Random").- Repeating of the tracks in the current MP3 directory.- List of MP3 tracks.
This equipment enables you to listen to music which is usually protected by copyright in accordance with cur-rent national and international regu-lations.
Please refer to these regulations and comply with them.
The playing and displaying of an MP3 compilation may depend on the recording programme and/or the pa-rameters used.
We recommend use of the ISO 9660 recording standard.
Using buttons H or I, select the MP3 direc-tory to be played.
To open an MP3 direc-tory, press knob G.
Using buttons M or N, select the track to be played.
Confirm by pressing knob G.