Peugeot 206 SW Dag 2006.5 Repair Manual

61
-Audio equipment and telematics
Level 1Level 2Level 3
RADIO
PREVIOUS
NEXT
MEMORY1 ... 6
AUTOSTORE
LIST
CD PLAYER
PREVIOUS TRACK
NEXT TRACK
TRACK NUMBER1 ... 20
RANDOM
SCAN
REPEAT
LIST
CHANGER
PREVIOUS TRACK
NEXT TRACK
TRACK NUMBER1 ... 20
PREVIOUS DISC
NEXT DISC
DISC NUMBER1 ... 6
RANDOM
SCAN
REPEAT
LIST
Level 1Level 2Level 3
TELEPHONE
LAST NUMBER
DIRECTORYDESCRIPTION
SERVICES
VOICE BOX
VOICE MAIL
SMS/MESSAGEDISPLAY
READ
TRAFFIC INFODISPLAY
READ
NAVIGATION/GUIDANCE
STOP
RESUME
DIRECTORYDESCRIPTION
ZOOM IN
ZOOM OUT
SHOWDESTINATION
VEHICLE
DISPLAY
AUDIO
TELEPHONE
NAVIGATION
TRIP COMPUTER
GUIDANCE
CALLDESCRIPTION
GUIDE TODESCRIPTION
The list of voice commands available is presented in th
is table:

62 -Audio equipment and telematics
SATELLITE NAVIGATION
SYSTEM
Initialisation
When the navigation is used for the first time, or if the battery is discon-nected, the navigation system must be initialised.
To do this, park the vehicle in the open so that it can make contact with a satellite then turn the ignition key to the Running position for fifteen minutes.
Certain functions or services de-scribed may vary depending on the version of CD ROM or the country where the vehicle is sold.
For safety reasons, the inputting of navigation in-formation by the driver must be carried out when the vehicle is stationary.
The CD ROM drive
This ispart of the RT3 GPS audio/telephone.
1. CD ROM ejection button.
2. CD ROM drive.
This contains all the map data.
It must be inserted in the drive, printed face upwards.
Use only CD ROMs approved by PEUGEOT.
The navigation CD ROM
The system uses the following ele-ments:
- A CD ROM drive.- A last voice message recall control - during navigation, a long press on the end of the lights stalk repeats the last spoken information.- Map data in the form of a CD ROM which must be inserted in the drive printed side up.- A configuration CD ROM, required in order to change the voice syn-thesiser voice (female or male) or the language used by the system.- A voice synthesiser which utters the manoeuvre instructions during navigation.- A screen.- A GPS aerial.- Controls on the panel and at the steering wheel.Introduction
The satellite navigation system guides you, by means of vocal and visual instructions (graphics), to your chosen destination.
The heart of the system lies in the use of a map database andGPS (Global Positioning System). With this system you can fix the position of your vehicle by means of a satel-lite network.

63
-Audio equipment and telematics
The last voice message recall control
Pressing for more than two seconds on the button at the end of the lights stalk repeats the last voice information.
The control keypad
Rotation of the dial:
This allows you to move round the screen and thus select a function.
It also allows you:
- with a "setting" type parameter, after selection, to increase or de-ororcrease the value,- with a "list" type parameter, to open the list and scroll throughthe values,- with map guidance, to increase the zoom.
Pressing the dial:
This allows:
- access to the list of controls (con-textual menu) of the permanent display, if there is no other display superimposed,- confirmation of the selected func-tion or the modified value,- selection of a "setting" or "list" typeparameter for modification.
"MENU" button:
- brief press: access to the general menu,- press for more than two seconds: displaying of a help menu with the list of voice commands, a description of the version of your equipment, a demonstration mode and the status of the services.
"MODE" button:
- brief press: modification of perma-nent display (audio system, naviga-tion/guidance...).
"ESC" button:
- brief press: cancelling of operation in progress or erasing of last su-perimposed display,- pressing for more than two sec-onds: erasing of all superimposed displays and return to the perma-nent display.
This lets you select and validate the functions, controls and programmes displayed.

64 -Audio equipment and telematics
General notes on the display
During navigation, if the navigation CD ROM is present, the screen indi-cates the manoeuvres to be carried out:
1. During navigation: manoeuvre to be carried out or, temporarily, course to be followed.
2. Next manoeuvre to be carried out.
3. Next road to be taken and name of the town.
4. Current road and name of the town.
5. Symbol concerning the Traffic Information or the local services*.
6. Estimated time of arrival at destination (based on free-flowing traffic).
7. Distance to final destination.
8. Distance to next manoeuvre.
General menu
Switch on the RT3 GPS audio/tele-phone and insert the navigation CD ROM.
Press the "MENU" button to access the general menu.
Select the Navigation/Traffic Infor-mation icon using the dial G, then validate by pressing the dial to ac-cess the main "Navigation - Traffic Info" menu.
Notes:
Depending on the situation of the ve-hicle and the reception of GPS infor-mation, this information may disap-pear from the screen temporarily.
In Navigation display mode, a long press of the "Menu" control permits access to the activation of a demon-stration of the Navigation function of your RT3 GPS audio/telephone.
Next, select a destination using the Navigation Menu. After entering, start the Navigation to display a simulation of the movement of your vehicle. The starting point will be either the cur-rent location of the vehicle or the last known location. It is possible to enter an alternative starting point via the demonstration menu.
This demonstration may enable you to visualise a journey that you wish to make in the near future.
* According to screen.

65
-Audio equipment and telematics
The main "Navigation - Traffic Info"menu offers various options for acti-vation or management of guidance:
- "Select a destination".- "Stages and routes".- "Guidance options".- "TMC traffic information".- "Stop guidance".
Once guidance has been started, a display warns you about use of the navigation. If you accept its content, press G. Observe current road indi-cations.
Navigation - Traffic Information
The "Select a destination" menu offers various options for reaching a destination:
- "Entering an address".- Select a "service" available in a town (restaurant, airport, hotel, cin-ema, theatre, etc.).- Select a destination stored in a "directory".- Select one of the twenty "previous destinations".
Selecting a destination
The last guidance address is dis-played.
Select and validate in succession the entry zones "Town", "Road",then "N°" to fill them in.
The "OK" function permits valida-tion of the address and access to the guidance activation function.
The "Store" function permits record-ing of the address in a directory file.
The "Curr. loc" function permits dis-play of the current address.
The "GPS" function permits selec-tion of the GPS coordinates.
Entering an address

66 -Audio equipment and telematics
To enter the name of a town, select each letter by turning the dial, then validate each letter by pressing the dial.
If an error is made entering the let-ters, the "Change" function permits erasing of the last letter entered.
Note: following the validation of a letter, only those which could make up a name existing in the database appear.
As letters are entered, the "List"function indicates the number of towns beginning with the same let-ters. Activation of this function per-mits selection of a town from the list.
When the list contains fewer than six names, these are displayed auto-matically. Select a town then validate by pressing the dial.
When the complete name of the town is displayed, select the "OK" function then confirm by pressing the dial.
Note: once the town has been en-tered, you can confirm by pressing "OK". You will then be guided to the centre of this town automatically.
Entering the name of the townEntering the name of the road
Enter the name of the street in the same way as the name of the town.
When the full name of the street is displayed, select the "OK" function then confirm by pressing the dial.
Note: do not enter the type of road (road, avenue, etc.).
Enter the number of the street previ-ously entered.
Select the "OK" function, then con-firm by pressing the dial.
Note: if the number of the street en-tered is not available, it is rejected.
You can also select a street from the "Junctions" function, which avoids having to enter the street number.
Note: if the street selected does not have a number, the list of junctions is displayed automatically.
The full destination is displayed. Select the "OK" function, then confirm by pressing the dial to ac-cess the guidance activation func-tion. Follow the instructions given by the system.
Entering the number of the roador junction
Entering the town and road using the alphanumeric keypad
Press the numeric key which corre-sponds to the letter required until the letter appears on the screen, then confirm by pressing the # key after each letter.
If you make an inputting error, press the * button to correct the last letter entered.

67
-Audio equipment and telematics
The last address entered is dis-played.
There are 3 options for defining the location around which you wish to obtain a service:
• Accept the last address entered by confirming the "OK" function.• Enter the name of another town then confirm the road (optional).• Automatically display the name of your current location using the "Curr. loc" function.
Selecting a service
If you wish to be directed to a serv-ice, select the category of service and confirm.
The list of services in the category selected is displayed. Select then confirm the required service to gain access to selection of the location.
An indication in the (X/n) band indi-cates whether there are several es-tablishments (n = maximum) offering the same service within a radius, as the crow flies, of 30 miles (50 km) of the chosen location.
Use the functions "<<", ">>" or "<", ">" to consult the list offered.
When the establishment of your choice is displayed, you can select:
- "OK" to activate guidance to this service.- "Store" to add to your directory.- "Contact" to call the service.
Note:
If the service selected is not available in the programmed location, a mes-sage will inform you of this.
Following confirmation of the loca-tion, the service nearest to it is dis-played. The distance indicated is the distance to it as the crow flies.
The most recent destinations are shown.
There are three possible methods of defining the location to which you wish to travel:
- accept the last details input by means of the "OK" function, - input the details of your destination,- automatically input the details of your current location by means of the "Curr. loc." function.
GPS details

68 -Audio equipment and telematics
Select the "Directory" function to access the file in which the address you are looking for is archived.
Select a description by scrolling down the list by means of the dial, then confirm by pressing the dial. The di-rectory file is then displayed.
Select the "OK" function, then press the dial to access theguidance acti-vation function.
Follow the directions given by the system.
Selecting a destination stored in the directory
Select the "Previous destinations"function to access one of the last twenty addresses stored.
Select a description by scrolling down the list by means of the dial, then confirm it by pressing the dial. The complete address is then dis-played.
Select the "OK" function, then press the dial to access the guidance acti-vation function.
Follow the instructions given by the system.
Selection of one of the previous destinations
- "Add a stage" to your route after starting guidance.- "Order or delete stages".- "Divert route". You must indicate the number of miles (kilometres) that you wish to avoid to permit the calculation of a new route.- Select the initial "Chosen destina-tion" in order to change it.Note: if a stage is programmed, the navigation system will always try to pass via this stage until you have gone through it or deleted it.
Stages and routes

69
-Audio equipment and telematics
- "Define the calculation criteria"for your route so that it is the fast-est, the shortest, takes account of the traffic information, etc... The last criteria selected are displayed.- "Set the voice synthesiser", set the volume of the guidance instruc-tions.- "Activate/deactivate road names", set the pronunciation in the spoken instructions.- "Description of the CD ROM", to display the Navigation CD ROM in-formation.- "Delete the previous destinations".
Guidance options
The last criterion used is displayed.
Select a criterion from the list, then validate by pressing the dial.
When the criterion of your choice has been selected, select the "OK"function then confirm by pressing the dial.
Calculation criteriaManagement of the directory
This function enables you to rename an address stored in the directory.
Select the description correspond-ing to the stored address to be changed.
Select the "Rename" function, then confirm by pressing the dial.
Select the "OK" function, then con-firm by pressing the dial to record the changes made.
Stopping/Resuming guidance
"Stop guidance"
During guidance, select this function then validate.
"Resume guidance"
In the absence of guidance, select this function then validateto activate guidance to the last destination pro-grammed.
Note: after re-starting the engine, a screen appears enabling you to resume guidance activated before the ignition was switched off.

70 -Audio equipment and telematics
The contextual menu associated with the "Navigation - Traffic Info" ap-plication appears as a superimposed display, when this is the application currently in use in the main screen window.
This menu is limited to the following functions:
- displaying of the map in "full screen" mode or downsized on the right-hand side ("windowed screen")*,- changing of the initial route,- storing of the current location (postal address if available or, if it is not, the GPS co-ordinates of the position),- changing of the route "guidance criteria",- stopping or resuming of guidance.
"Navigation - Traffic Info" contextual menuTMC (Traffic Message Channel) RDS Traffic Information
The RT3 GPS audio/telephone per-mits access to the TMC RDS traffic information which is broadcast free of charge on the FM waveband.
This function enables you to re-ceive messages regarding the traffic conditions (accidents, traffic jams, weather, ...).
They may appear temporarily as a superimposed display or be read by the voice synthesiser, if it is active.
You can read the messages broad-cast by the TMC station while listen-ing to another station.
In map mode, special TMC symbols are displayed depending on the type of information*.
Select the "TMC Traffic Informa-tion" function from the "Navigation/Traffic Info" menu:
- "Consult the messages" to dis-play the list of TMC messages available,- "Filter the TMC information" to select a type of message and ini-tialise the TMC station,- "Voice synthesis" to listen to the TMC messages received,- "Activate/Deactivate message presentation" to display/not dis-play the TMC messages received.
* According to screen.