Peugeot 206 SW Dag 2006 Service Manual

Audio equipment and telematics42 -
RT3 GPS AUDIO/TELEPHONE
Stalk movementFunction
1 - Press (behind) Increase volume.
2 - Press (behind) Decrease volume.
1+2 - Press together Switch off sound (mute); restore sound by pressing an y button.
3 - Press Automatic search of upper frequencies (radio) -
Selection of following track (CD/MP3/CD changer).
Continuous pressure until release: accelerated forwards play (CD/C
D changer),
rapid scanning of following tracks (MP3).
4 - Press Automatic search of lower frequencies (radio) -
Selection of previous track (CD/MP3/CD changer).
Continuous pressure until release: accelerated backwards play (CD/C
D changer),
rapid scanning of previous tracks (MP3).
5 - Press end Change radio mode (radio/CD/MP3/CD changer/AUX) - Confirmation of sele
ction (on a menu or
screen) - Call connect/Call disconnect (Tel./Incoming call) - Call disconnect (Tel./Engaged).
Press for more than 2 seconds: display telephone contextual menu (T el./Not engaged).
6 - Rotation (clockwise) Selection of higher station stored in memory or storing in memory in
position 1 for station not in
memory (radio) - Selection of following CD - Selection of follow ing MP3 directory - Selection of
following item on a menu or screen.
7 - Rotation
(anti-clockwise) Selection of lower station stored in memory or storing in memory in
position 6 for station not in
memory (radio) - Selection of previous CD - Selection of previous MP3 di rectory - Selection of
previous item on a menu or screen.

43
-Audio equipment and telematics
Button
Function
APress: audio/telephone on/off.
Rotation: volume adjustment.
BEjection of CD.
C SOURCESelection of source: radio, CD, MP3, CD changer or AUX.
DCall connect (Tel./Incoming call) - Display contextual menu (Tel. /Not engaged).
EAccess "PEUGEOT" services menu (if the options and services are available).
F MODEChange display.
GPress: display contextual menu of display - Confirm inputting or adju stment.
Rotation: move within a menu - Select function/parameter - Audi o settings: sound ambience, bass,
treble, loudness, fader (front/rear balance), balance (left/righ t balance), automatic volume.
H
Adjust higher frequency, step by step or continuous (long press).
Select previous MP3 directory (MP3).
Select previous CD (CD changer).
I
Adjust lower frequency, step by step or continuous (long press).
Select following MP3 directory (MP3).
Select following CD (CD changer).
JInfrared window (IrDA).
K ESCCancel current operation.
LSIM card cover.
M
Automatic search of higher frequency - Selection of following CD track.
Double press: change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated forwards play (CD/CD cha nger), rapid scanning of
the following tracks (MP3).

44 -Audio equipment and telematics
ButtonFunction
N
Automatic search of lower frequency - Selection of previous CD track.
Double press: change from LO mode to DX mode.
Press for more than 2 seconds: CD accelerated backwards play (CD/CD cha nger),
rapid scanning of the previous tracks (MP3).
O DARK1st press: display top band (remainder of screen is black) - 2nd press: brightness removed
(black screen) - 3rd press: return to normal screen.
Press for more than 10 seconds: reinitialisation of the system.
P MENUDisplay general menu - Press for more than 2 seconds: display help scre en with list of voice
commands, a description of the version of your equipment, a demon stration mode and the status
of the services.
QDisconnect.
R BAND
ASTSelect FM1, FM2, FMast, AM wavebands.
Press for more than 2 seconds: automatic storing of stations (autosto re).
S TA/PTYTraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
T RDSRDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
U AUDIODisplay window for adjusting sound ambience, bass, treble, loudness, sound distribution
and automatic correction of volume.
V SOSPress between 2 and 8 seconds: emergency call.
1 to 6
1 2 3 4 5 6Select station in memory.
Press more than 2 seconds: store station being listened to in memo ry.
1 to 5
1 2 3 4 5Selection of CDs in the CD changer.
0 to 9 * #
0 1 2 3 4 56 7 8 9 * #Alphanumeric keypad for entering text and telephone numbers.

45
-Audio equipment and telematics
SELECTING THE SOURCE
Press the
SOURCE button to select
the audio source: RADIO, CD, CD
CHANGER, MP3 or audio/video
auxiliary input (AUX)*.
GENERAL MENU
Pressing button "P" provides access
to all of the functions available on the
RT3 GPS audio/telephone:
"Navigation - Traffic info".
"Audio functions".
"Directory".
"Telephone and telematic
services".
"Configuration" of your vehicle.
"Map"*.
"Video"*.
SCREEN
In accordance with your selections,
the screen displays the information
relating to the Navigation - Traffic In-
formation, Audio, Directory, Telephone
and Telematic Services, Configura-
tion*, Map* and Video* functions.
It is possible to change the infor-
mation displayed on the right-hand
side of your screen by pressing "F",
"G" , "P" and "U", or using the voice
commands.
The information on the left-hand side
and at the top of the screen depends
on the selection made for the right-
hand side.
Some information and actions (warning,
settings, contextual menu) are indicated
by the temporary opening of a window
on the screen.
MOVING WITHIN THE MENUS
Buttons "G", "H" , "M" , "I" , "N" en-
able you to move within the menus
and pressing button "G" confirms
your selections.
We recommend that you do not use
the RT3 GPS audio/telephone buttons
while driving. In some countries, cer-
tain buttons may be deactivated (in ac-
cordance with national legislation).
* According to screen.
Auxiliary Input (AUX)*
The auxiliary input allows the con-
nection of portable equipment (MP3
player, ...).
 Activate the auxiliary input via
the "Configuration" menu, then
"Sound" and finally "Activate aux
input".
 Connect the portable equipment
to the audio sockets (white and
red, type RCA) located in the
glove box.
 Press the SOURCE button suc-
cessively and select AUX.

46 -Audio equipment and telematics
GENERAL FUNCTIONS
On/off
With the ignition switch
in the accessories/run-
ning position or with
the ignition on, press
button A to switch the
audio function of the
RT3 GPS audio/tele-
phone on or off.
Note: in the absence of an ignition
key, press button A to switch the
telematics system on or off.
The RT3 GPS audio/telephone can
operate for 30 minutes without
switching the vehicle ignition on.ADJUSTING THE VOLUME
Turn button A clockwise to increase
the volume of the audio/telephone or
anti-clockwise to decrease it.
Anti-theft system
The RT3 GPS audio/telephone is coded
in such a way that it can operate only
on your vehicle. If fitting it to another
vehicle, consult your PEUGEOT dealer
for configuration of the system.
The anti-theft system is automatic
and requires no action on your
part.
MUTE
Notes:
- the SIM card must be removed only
after the audio/telephone has been
switched off,
- following automatic switching off of the audio/telephone after 30 minutes
it is possible to make a telephone
call by pressing button D,
- after the ignition has been switched
off, the audio/telephone can be
switched on again by pressing but-
tons D, E , V or by inserting a CD in
the player.
AUDIO SETTINGS
Press button U to
access the Sound
Ambience , Bass , Tre-
ble , Loudness , Fader
(front/rear balance), Balance
(left/right
balance) and Automatic volume ad-
justment setting windows.
Exit from audio mode is automatic af-
ter a few seconds without any action,
or by pressing the "ESC" button.
Note: bass, treble and loudness set-
tings are specific to each source. It is
possible to have different settings for
radio, CD MP3, CD changer or AUX.
Notes
The volume setting is specific to each
source. It is possible to have different
settings for radio, CD, CD changer or
AUX.
The volume is adjusted automatically
in relation to the speed if the
auto-
matic volume function is active.
The volume when stationary will be
the same the next time the audio
equipment is switched on. Use the control on the
steering wheel to acti-
vate this function.
The sound is cut off, re-
gardless of which source
is in use. The perma-
nent audio sources (ra-
dio, CD, CD changer,
MP3, auxiliary input) remain cut off but
not the others (guidance instructions, for
example).
To restore the sound, press one of
the two volume buttons.
You can also increase
or decrease the vol-
ume using the con-
trols on the steering
wheel.

47
-Audio equipment and telematics
Sound ambience
This function permits
the selection of a
"None", "Rock", "Clas-
sical", "Jazz", "Vocal"
or "Techno" sound
ambience.
Turn button G to
select the sound
ambience.
Selecting "None" permits access to
all of the settings defined below. Se-
lecting another ambience sets the
bass and treble automatically.
Bass setting
When "Bass" is displayed, turn
button G to vary the setting.
- "-9" for minimum bass setting,
- "0" for normal setting,
- "+9" for maximum bass setting. Treble setting
When
"Treble" is displayed, turn
button G to vary the setting.
- "-9" for minimum treble setting,
- "0" for normal setting,
- "+9" for maximum treble setting.
Adjusting the loudness
This function automatically empha-
sises bass and treble tones when the
volume is low.
Rotate button G to switch the func-
tion on or off.
Setting the front/rear sound
distribution (Fader)
When "Fader" is displayed:
- Turn button G clockwise to increase
the volume in the front.
- Turn button G anti-clockwise to
increase the volume in the rear. Setting the right/left sound
distribution (Balance)
When
"Balance" is displayed:
- Turn button G clockwise to increase
the volume on the right.
- Turn button G anti-clockwise to
increase the volume on the left.
Automatic volume adjustment
This function allows the volume to
be adjusted automatically depending
on the level of noise produced by the
speed of the vehicle.
Press button G to switch the function
on or off.

48 -Audio equipment and telematics
RADIO
Notes on radio reception
Car radio/telephone receivers are
subject to phenomena which do not
affect domestic radio sets. Both MW/
LW and FM are subject to various
forms of interference. This is not a
reflection on the quality of the equip-
ment, but is due to the nature of the
signals and the way in which they are
transmitted.
On MW/LW interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the result
of the increasing distance from the
transmitter, deflection of the signals
by obstacles (mountains, hills, build-
ings, etc.) or of being in an area which
is not covered by a transmitter.
Selecting the radio
Press "SOURCE" several times. Automatic station search
Briefly press button
M or N to search
for the station immediately above or
below.
The search stops at the first station
found.
If the TA traffic programme is selected,
only the most powerful stations broad-
casting this type of programme are
selected.
Selecting a waveband
Briefly press button "BAND/AST" to
select the FM1, FM2, FMast and AM
wavebands. Search sensitivity
It is possible to carry out automatic
searches at two levels of sensitivity:
- To tune in to the most powerful
transmitters, select the local search
mode "LO" (default option).
- To tune in to the weakest or most distant transmitters, select the
sensitive search mode "DX".
The station search is carried out first
in "LO" (local) sensitivity, then in
"DX" (distant) sensitivity.
To make a direct search in "DX"
(distant) sensitivity, press button M or
N twice in succession.

49
-Audio equipment and telematics
Automatic storing of FM stations
in the memory (autostore)
Recalling stations stored in the
memory
For each waveband, briefly press
the buttons
"1" to "6" to recall the
corresponding stored station.
In the case of an RDS station, the
frequency appears for a few seconds
before its name.
Recalling an RDS station may result
in a search for the frequency which
corresponds to the region through
which you are travelling.
Press the
"BAND/AST" button for
more than two seconds.
Your audio/telephone automatically
stores the 6 stations with the strong-
est signal in FM. These stations are
stored in the FMast waveband.
If it is not possible to find 6 stations,
the remaining memories are empty.
Manual station search
Briefly press button H or I
to increase or decrease the
frequency displayed.
By continuing to press the
button in the direction select-
ed, you will obtain continuous
scrolling of the frequency.
Scrolling stops when you
release the button.
Manual station storing
Select the station required.
Press one of the buttons "1" to "6"
for more than two seconds.
A window appears on the screen, the
station is stored when it is displayed
on the memory number that you have
allocated to it.

50 -Audio equipment and telematics
RDS SYSTEM
Using the RDS (Radio Data
System) function on FM
Most FM radio stations use the RDS
system.
This system allows you to continue lis-
tening to the same station, whatever
frequency it is using for the region you
are going through.
This screen indicates
the name of the sta-
tion selected. The au-
dio/telephone continu-
ously searches for the
transmitter which transmits the same
programme with the best reception.
This search may cause slight interfer-
ence with the transmission.
The function can be switched on
or off via the "RDS" button or the
"AUDIO FUNCTIONS" main menu.
The screen will show:
- "RDS" if the function is active and
available for the station selected.
- "RDS" crossed out or "RDS"
greyed out on the screen* if the
function is active but is not avail-
able on the station.
If the station to which you are listening
does not have several frequencies
in the region through which you are
travelling, you can switch off the auto-
matic frequency following.
Traffic information programme
Press the "TA/PTY"
button to switch the
function on or off.
The multifunction
screen will show:
- TA if the function is selected,
- TA crossed out or greyed out*
if the function is selected but not
available.
Any traffic information flash will be
given priority, whatever source you
are listening to (radio, CD or CD
changer).
If you wish to interrupt the broad-
casting of a message, press the
"TA/PTY" button.
Notes: the volume of the traffic
information is independent of the
volume of normal audio/telephone
listening.
You can adjust it by using the volume
button. The setting will be stored and
will be used when the next messages
are broadcast.
You must be on the FM waveband.
During station search or automatic
storing phases, if the "TA" function
is selected, transmitters which are
compatible with the broadcasting of
these messages will be tuned to or
stored first.
The station being listened to must
indicate via the RDS system that it
broadcasts traffic information. Stations which are organised in a
network (EON) have regional trans-
mitters which broadcast their own
programmes: you can listen to one
of these stations and switch to the
network station which broadcasts the
traffic information messages.
RDS station following Regional following mode (REG)
When they are part of a network, cer-
tain stations broadcast regional pro-
grammes in the various areas they
serve. With regional following mode
you can keep listening to the same
programme.
You can choose to follow:
• Either a regional station only.
• Or the entire network, with the
possibility of listening to a different
programme.
The function can be switched on or
off via the "AUDIO FUNCTIONS"
main menu or by pressing the "RDS"
button for more than 2 seconds.
The multifunction screen will show:
- REG if the function is active,
- REG crossed out or greyed
out* if the function is active but not
available.
* According to screen

51
-Audio equipment and telematics
PTY function
This allows you to listen to stations
broadcasting a specific type of pro-
gramme, selected from the list of
available types below:
NEWS SCIENCE
AFFAIRS VARIED
INFO POP M
SPORT ROCK M
EDUCATE EASY M
FICTION LIGHT M
CULTURE OTHER M
WEATHER LEISURE
FINANCE JAZZ
CHILDREN COUNTRY
SOCIAL NATION M
RELIGION OLDIES
PHONE IN FOLK M
TRAVEL DOCUMENT
When FM is selected, press button
"TA/PTY"
for more than two seconds
to switch the function on or off. To find a
PTY programme:
- select the PTY button,
- turn button G to scroll down the
different types of programmes of-
fered, then confirm your choice,
when the programme of your choice
is displayed press button M or N to
carry out an automatic search (after
an automatic search the PTY func-
tion is switched off if no station has
been found).
In PTY mode the different types of
programmes can be stored in the
memory. To do this, press the prese-
lection buttons "1" to "6" for more
than two seconds. To recall the type
of programme stored in the memory,
briefly press the corresponding
button. EON system
This system connects stations which
are part of the same network. It ena-
bles the broadcast of traffic informa-
tion or a
PTY programme, by a station
that is part of the same network as the
station to which you are listening.
The service is available when you
have selected the TA traffic informa-
tion programme or the PTY function.
Audio functions menu
Select the "Audio functions" menu
from the general menu to:
- "Activate/Deactivate RDS frequen-
cy following" ,
- "Activate/Deactivate regional
mode" ,
- "Activate/deactivate Radio Text
display" , broadcast by the radio
station if available ("RT" is displayed
at the bottom of the screen).
- "Activate/deactivate CD details
display" , also permits MP3 display.