PEUGEOT 207 2007 Workshop Manual

!
!
55
4. Access to rear seats (3-door and GTi)
 Pull the handle to fold the seat back and move the seat forwards. On repositioning, the seat returns to its initial position.
5. Head restraint height and angle adjustment (except GTi)
 To raise the head restraint, pull it upwards.
 To remove the head restraint, press the lug A and pull the head restraint upwards.
 To put the head restraint back in po-sition, locate the stems of the head restraint in the holes, taking care to keep them in line with the seat back.
 To lower the head restraint, press the lug A and the head restraint at the same time.
 To tilt the head restraint, tilt the lower part forwards or rearwards.

!
56
REAR SEATS
Bench seat the left-hand part (2/3) or right-hand part (1/3) of which can be folded to adapt the load space in the boot.
Rear head restraints
These have a high position (comfort) and a low position (rear visibility).
They can also be removed; to remove them:
pull the head restraint upwards to the stop,
 then, press the lug.
6. Armrests (except 3-door and GTi)
These can be folded down and are µremovable.
 To remove them, press the button located between the armrest and the side of the seat and pull it.

!
56
REAR SEATS
Bench seat the left-hand part (2/3) or right-hand part (1/3) of which can be folded to adapt the load space in the boot.
Rear head restraints
These have a high position (comfort) and a low position (rear visibility).
They can also be removed; to remove them:
pull the head restraint upwards to the stop,
 then, press the lug.
6. Armrests (except 3-door and GTi)
These can be folded down and are µremovable.
 To remove them, press the button located between the armrest and the side of the seat and pull it.

!
57
Folding the seat (Saloon)
To fold a rear seat without any risk of damage to it, always start with the seat cushion, never the seat back:
 move the corresponding front seat forward if necessary,
 raise the front of the seat cushion 1,
 tilt the seat cushion 1 against the front seat,
 check that the seat belt is positioned correctly on the side of the seat back,
Repositioning the seat (Saloon)
When repositioning the rear seat:
 straighten the seat back 3 and se-cure it,
 fold back the seat cushion 1.
 pull control 2 upwards to release the seat back 3,
 place the head restraints in the low position or remove them if neces-sary,
 tilt the seat back 3.

!
56
REAR SEATS
Bench seat the left-hand part (2/3) or right-hand part (1/3) of which can be folded to adapt the load space in the boot.
Rear head restraints
These have a high position (comfort) and a low position (rear visibility).
They can also be removed; to remove them:
pull the head restraint upwards to the stop,
 then, press the lug.
6. Armrests (except 3-door and GTi)
These can be folded down and are µremovable.
 To remove them, press the button located between the armrest and the side of the seat and pull it.

!
i
58
Folding the seat (SW)
To fold a rear seat without any risk of damage:
 move the corresponding front seat forward if necessary,
 place the head restraints in the low position,
Repositioning the seat (SW)
 when repositioning the rear seat, straighten the seat back 3 and lock it.
 pull the control 2 forward to release the seat back 3 which folds easily onto the seat cushion 1.

i
!
59
MIRRORS
Exterior mirrors
Adjustable mirror permitting the lateral rearward vision necessary when over-taking or parking.
Folding
 from outside: lock the vehicle using the remote control or the key.
 from inside: with the ignition on, pull switch A rearwards.
Manual model
Adjustment
 Move the lever in all four directions to direct the mirror correctly.
Folding
 When parked, fold the mirror ma-nually to protect it.
Unfolding
 Before starting, unfold the mirror.
Electric model
Adjustment
Slide switch A to the right or to the left to select the corresponding mirror.
 Move knob B in all four directions to adjust.
Return switch A to the centre position.
Unfolding
 from outside: unlock the vehicle using the remote control or the key.
 from inside: with the ignition on, pull switch A rearwards.

!
i
60
Interior mirror
Adjustable mirror permitting central rearward vision.
Adjustment
 Adjust the mirror to direct it correctly in the "day" position.
Automatic day/night model
System which automatically and gra-dually changes between the day and night uses.
To avoid glare, the interior mirror darkens automatically in relation to the intensity of the light from the rear.
It clears as soon as the light (light beam of vehicles behind, sun...) decreases, so providing optimum visibility.
Switching on
 Switch on the ignition and press switch 1.
The indicator light 2 comes on and the mirror operates in automatic mode.Manual model
The mirror is fitted with a night anti-dazzle device.
Day/night position
 Pull the lever to change to the "night" anti-dazzle position.
 Push the lever to change to the normal "day" position.
Switching off
 Press switch 1.
The indicator light 2 switches off and the mirror remains at its clearest.

!
i
61
STEERING WHEEL ADJUSTMENT
The height and depth of the steering wheel can be adjusted to adapt the dri-ving position to the size of the driver.
Adjustment
When stationary, pull the control to unlock the steering wheel.
 Adjust the height and depth.
 Push the control to lock the steering wheel.
SUN VISOR
Component which protects against sunli-ght from the front or the side, also equip-ped with an illuminated courtesy mirror.
With the ignition on, raise the concea-ling flap; the mirror is lit automatically.
This sun visor is also equipped with a ticket holder.
TOLL CARD/CAR PARK TICKET
WINDOWS
Facility for affixing toll cards and/or car park tickets.
These windows are located on each side of the base of the interior mirror.
They are two non-reflective areas of the athermic windscreen.

!
62
MAT
Removable component which protects the carpet against exterior dirt.
Refitting
To refit the mat on the driver’s side:
 position the mat correctly,
 refit the fixings by pressing,
 check that the mat is secured cor-rectly.Fitting
When fitting the mat for the first time, use only the fixings provided in the wallet attached.
Removal
To remove the mat on the driver’s side:
move the seat as far back as possible,
 unclip the fixings,
 remove the fixings, then the mat.