Peugeot 207 CC 2007 Owner's Manual

187
QUESTIONSOLUTIONRESPONSE
There is a difference in sound quality between the different audio sources (radio, CD, CD changer...).
Check that the audio settings (Volume, Bass, Treble, Ambience, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Front-Rear Balance, Left-Right Balance) to the middle position, select the musical ambience "None" and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD, CD changer...).
The CD is ejected automatically or is not played by the player.
- Check that the CD is inserted in the player the right way up.- Check the condition of the CD: the CD cannot be played if it is too damaged.- Check the content in the case of a recorded CD: consult the advice in the Audio section.- The audio equipment’s CD player does not play DVDs.- Due to inadequate quality, certain recorded CDs will not be played by the audio system.- The CD changer does not play MP3 CDs.
The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.
The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment.
FREQUENTLY ASKED QUESTIONS
The CD player sound is poor.The CD used is scratched or of poor quality.Insert good quality CDs and store them in suitable conditions.
The audio equipment settings (bass, treble, ambienc es) are unsuitable.Set the treble or bass level to 0, without selecting an ambience.

188
QUESTIONSOLUTIONRESPONSE
The stored stations do not function (no sound, 87.5 Mhz is displayed...).
An incorrect waveband is selected.Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which the stations are stored.
The traffic announcement (TA) is displayed. I do not receive any traffic information.
Tune to a radio station which broadcasts traffic information.The radio station is not part of the regional traffic information network.
The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is displayed...).
The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
The environment (hills, buildings, tunnels, basemen t car parks...) block reception, including in RDS mode.
The aerial is absent or has been damaged (for examp le when going through a car wash or into an underground car park).
Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.
This phenomenon is normal and does not indicate a failure of the audio equipment.
Have the aerial checked by a PEUGEOT dealer.PEUGEOTPEUGEOT
Sound cut-outs of 1 to 2 seconds in radio mode.
During this brief sound cut-out, the RDS searches for any frequency permitting better reception of the station.Deactivate the RDS function if the phenomenon is too frequent and always on the same route.
With the engine off, the audio equipment switches off after a few minutes of use.
When the engine is switched off, the audio equipmen t operating time depends on the battery charge.The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle’s battery.
Start the vehicle’s engine to increase the battery charge.
The message "the audio system is overheated" appears on the display.
Switch the audio system off for a few minutes to allow the system to cool.In order to protect the installation if the surrounding temperature is too high, the audio equipment switches to an automatic thermal protection mode leading to a reduction of the volume or stopping of the playing of the CD.

175
AUDIO EQUIPMENT/HANDS-FREE KIT
CONTENTS
• 01 First steps pg. 176
• 02 General menu pg. 177
• 03 Audio pg. 178
• 04 Hands-free kit pg. 181
• 05 Control short-cuts pg. 182
• 06 Configuration pg. 183
• 07 Display flow charts pg. 184
• Frequently asked questions pg. 187
The INFOTEC internet site provides additional animated information on the RD4. It can be consulted at the following address: http://public.infotec.peugeot.comSimple registration permits access and free consultation of the handbook.
The RD4 audio equipment is coded in such a way that it will only operate in your vehicle. If it is to be installed in another vehicle, contact your PEUGEOT dealer for configuration of the system.
For safety reasons, the driver must carry out opera tions which require prolonged attention while the vehicle is stationary.When the engine is off, and in order to prevent discharging of the battery, the RD4 audio equipment may switch off after a few minutes.

176
1
2
1011
12
13
14
15
3 4 5 6 7 8 9
12
01 FIRST STEPS
1 - On/Off and volume adjustment.
2 - CD eject.
3 - Selection of the screen display mode.
4 - Selection of the source: radio, CD and CD changer.
5 - Selection of the FM1, FM2, FMast and AM wavebands.
6 - Setting the audio options:
front/rear balance, left/right balance, loudness, sound
ambiences.
7 - Displaying of the list of local stations, of the tracks on the CD
or of the MP3 directories. 8 -
Abandon current operation.
9 - TA (Traffic Announcement) function on/off.
Long press: access to the PTY (TYpes of radio Pro gramme)
mode.
10 - Confirmation.
11 - Automatic search for a lower/higher frequency.
Selection of previous/next CD or MP3 track.
12 - Selection of a lower/higher radio frequency.
Selection of the previous/next CD.
Selection of the previous/next MP3 directory.
13 - Displaying of the general menu. 14 -
Buttons 1 to 6:
Selection of a stored radio station.
Selection of a CD in the CD changer.
Long press: storing of a station.
15 - The DARK button changes the display on the screen
to improve driving comfort at night.
1st press: lighting of the top banner only.
2nd press: black screen display.
3rd press: return to the standard display.

177
02 GENERAL MENU
AUDIO FUNCTIONS: radio, CD, options.
TRIP COMPUTER: distance entering, warnings, status of functions.
TELEPHONE: hands-free kit, matching, management of a communication.
PERSONALISATION-CONFIGURATION: vehicle parameters, display, languages.
> MONOCHROME DISPLAY C
> MONOCHROME DISPLAY A

178
11
22
33
44
22
44
33
11
03 AUDIO
RADIO
SELECTING A STATION
Press the SOURCE button several times in succession and select the radio.
Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM.
Briefly press one of the buttons to carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST REFRESH button to display the list of stations received locally (30 stations maximum).To update this list, press for more than two seconds.
Select ACTIVATE FREQUENCY FOLLOWING (RDS) then press OK. RDS appears on the display.
Select the FM WAVEBAND PREFERENCES function then press OK.
Select AUDIO FUNCTIONS then press OK.
Press the MENU button.
FM WAVEBAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)ACTIVATE FREQUENCY FOLLOWING (RDS)
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception, including in RDS mode. This is a normal effect of t he way in which radio waves are transmitted and doe s not indicate any failure of the audio equipment.
RDS
The RDS, if displayed, enables you to continue listening t o the same station by means of frequency following. However, in certain conditions, this RDS station is not followed throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.

179
11
22
33
11
22
CD CHANGER
PLAYING A CD (NOT MP3 COMPATIBLE)
Insert the CDs in the changer one by one.
Press the SOURCE button several times in succession and select CD CHANGER.
Press one of the buttons on the numeric keypad to select the corresponding CD.
Press one of the buttons to select a track on the CD.Press and hold one of the buttons for fast forwards or backwards play.
Insert circular compact discs only. Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may cause faults which are no reflection on the quality of the original player.
Without pressing the EJECT button, insert a CD in t he player, play begins automatically.
To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD.
Press one of the buttons to select a track on the CD.Press the LIST REFRESH button to display the list of tracks on the CD.
CD
PLAYING A CD

180
11
22
Insert an MP3 compilation in the player.The audio equipment searches for all of the music tracks, which may take anything between a few seconds and several tens of seconds, before play begins.
On a single disc, the CD player can read up to 255 MP3 files spread over 8 directory levels. However, it is advisable to keep to a limit of two levels to reduce the access time before the CD is played.
CD
PLAYING AN MP3 COMPILATION*
MP3 CD
INFORMATION AND ADVICE
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 A udio Layer 3, is an audio compression standard which permits the recording of The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3, The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,
several tens of music files on a single disc.is an audio compression standard which permits the recording of is an audio compression standard which permits the recording of
The playing and displaying of an MP3 compilation may depend on the recording programme and/or the parameters used.The playing and displaying of an MP3 compilation may depend on The playing and displaying of an MP3 compilation may depend on
In order to be able to play a recorded CDR or CDRW, when recording select standards ISO 9660 level 1.2 or Joliet.In order to be able to play a recorded CDR or CDRW, when In order to be able to play a recorded CDR or CDRW, when
If the disc is recorded in another format, it may not be played recording select standards ISO 9660 level 1.2 or Joliet.recording select standards ISO 9660 level 1.2 or Joliet.
correctly.If the disc is recorded in another format, it may not be played If the disc is recorded in another format, it may not be played
It is recommended that the same recording standard is always used correctly.correctly.
for an individual disc, with as low a speed as possible for optimum It is recommended that the same recording standard is always used It is recommended that the same recording standard is always used
sound quality.In the particular case of a multi-session CD, the Joliet standa rd is sound quality.sound quality.
recommended.
The audio equipment will only play files with the extension ".mp3". No other type of file (.wma, .mp4...) can be played.The audio equipment will only play files with the extension ".mp3". The audio equipment will only play files with the extension ".mp3".
It is advisable to restrict file names to 20 characters without usin g special characters (e.g.: " " ? ; ) to avoid any playing or displaying It is advisable to restrict file names to 20 characters without usin g It is advisable to restrict file names to 20 characters without using
problems.special characters (e.g.: " " ? ; ) to avoid any playing or displaying special characters (e.g.: " " ? ; ) to avoid any playing or displaying
To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD.
Press one of the buttons to select a track on the CD.Press the LIST REFRESH button to display the list of directories of the MP3 compilation.
* According to specification.

181
11
22
33
11
22
5511
04 HANDS-FREE KIT
MATCHING A TELEPHONE
DISPLAY C
For safety reasons and because they require prolonged attention on the part of the driver, the operations for matching of the Bluetooth mobile telephone with the RD4 hands-free kit must b e carried out with the vehicle stationary and the ignition on.
Select the accessory which corresponds to the name of the vehicle, a superimposed configuration display appears on the multifunction display.
Activate the telephone’s Bluetooth function and carry out a search of the Bluetooth accessories present for the telephone.
Select the YES tab on the display using the buttons then confirm by pressing OK.
Enter the vehicle’s authentication code (=1234).Depending on the telephone, you may be asked to enter this code before the superimposed configuration display appears.
YES
YES
The services offered by the hands-free kit depend on the network, the SIM card and the compatibility of the Bluetooth equipment used.Consult your telephone’s manual and your operator t o find out which services are available to you. A list of mobile telephones which offer the best range of services is available from the networ k. Contact a PEUGEOT dealer.
RECEIVING A CALL
An incoming call is announced by a ring and a super imposed display on the multifunction display.
Select the YES tab on the display using the buttons and confirm by pressing OK.
Press the end of the steering wheel stalk to accept the call.
Press and hold the end of the steering wheel stalk to access your directory.
To dial a number, use the keypad on your telephone.
MAKING A CALL

182
RADIO: selection of the next stored station.CD CHANGER: selection of the next CD.Selection of the next item on a menu.MP3: selection of the next directory.
RADIO: selection of the previous stored station.CD CHANGER: selection of the previous CD.Selection of the previous item on a menu.MP3: selection of the previous directory.
RADIO: automatic search for a higher frequency.CD/CD CHANGER/MP3: selection of the next track.CD/CD CHANGER: continuous press: fast forwards play.Selection of the previous item.
RADIO: automatic search for a lower frequency.CD/CD CHANGER/MP3: selection of the previous track.CD/CD CHANGER: continuous press: fast backwards play.Selection of the next item.
Volume increase.
Volume decrease.
05 CONTROL SHORT-CUTS
Mute: by pressing the volume increase and decrease buttons simultaneously.
The sound is restored by pressing one of the two volume buttons.
- Change of sound source.- Confirmation of a selection.- Pick up/Hang up the telephone.- Press for more than 2 seconds: access to the telephone menu.
STEERING WHEEL CONTROLS