Peugeot 208 2013 Manual PDF

69
3
Comfort
A setting around 21 enables you to obtain an
optimum level of comfort. Depending on your
requirements, a setting between 18 and 24 is usual. In addition, it is recommended that you avoid a
left/right setting difference of more than 3.
On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no needto alter the value displayed in order to obtain the required level of comfort. The system corrects the temperature difference automatically and as quicklyas possible.
Automatic visibility programme
For maximum cooling or heating of the passenger compartment, you canexceed the minimum value of 14 or the maximum value of 28. )Push the switch 2
or 3down until"LO"
is displayed or up until "HI"isdisplayed.
See "Front demisting-defrosting".
Dependin
g on your requirements, you can
make a different selection from that offered bythe system by changing a setting. The other functions will still be controlled automatically.
When you modify a setting, the indicator lamp in the "AUTO"
button goes off.
Resuming manual control
The air conditioning is designed to
operate efficiently in all seasons, with
the windows closed.

Air conditioning On/Off

It allows you:


- in summer, to lower the temperature,

- in winter, above 3 °C, to improve demisting.
Switchin
g on) Press the "A/C"button, the associated
indicator lamp comes on.

The air conditioning cannot operate when the air flow is set to off.
Switchin
g off) Press the "A/C"button again; the
associated indicator lamp goes off.
Switching off may cause some problems(humidity, misting).
) Press the "AUTO"
button again
to return to the automatic comfortprogramme.



Te m p e r a t u r e a djustment

The driver and front passenger can each set
the temperature to suit their requirements.
The value indicated in the screen corresponds
to a level of comfor t and not to a temperature in
de
grees Celsius or Fahrenheit.
) press the button 2
or 3
down (blue) reduce the value or up(red) to increase it.

70
Comfort

Avoid driving for too long with the system switched off (risk of misting and of deterioration of the air quality).
Pressing the "full fan"buttonreactivates the system with the settings prior to deactivation.



Avoid prolonged operation in interior air recirculation mode (risk of misting and of deterioration of the air quality).


Switching the system off


Air intake/Air recirculation
)
Press this "full fan"
button toincrease the air flow.
Air distribution adjustment )
Press the "empty fan"
air flow
button until the
fan symboldisappears and "---" appears.
Thi
s action switches off all of the functions of
the air conditioning system.
The temperature is no longer maintained at acomfor table level. However, a slight flow of air, due
to the movement of the vehicle, can still be felt.
)Press this button to recirculatethe interior air. The indicator
lamp in the button comes on and
t
he air recirculation symbol isdisplayed.
Air recirculation prevents exterior odours
and smoke from enterin
g the passenger compartment. It is activated automatically when
operating the screen wash.) As soon as possible, press this button
again to permit the intake of exterior air and
prevent misting. The indicator lamp in the
button goes off.
) Press this button several times in succession to direct the air flow
in turn towards:
- the windscreen, the side windows and the
footwells,
- the windscreen and side windows (demisting or defrosting),
- the central and side vents,- the central vents, the side vents and thefootwells,
- the footwells.


Air fl ow adjustment
The air flow symbol (a fan) appears in thescreen. It is filled in progressively in relation to
the value required.
) Press this "empty fan"
button to
reduce the air flow.

71
3
Comfort
) Switch off the demisting/defrostingof the rear screen and door mirrorsas soon as appropriate, as lower current consumption results inreduced fuel consumption.


Front demist - defrost






Rear screen
demist - defrost
The control button is located on theair conditioning system control panel.
These markin
gs on the control panel indicate the control positions for rapid demisting or
defrosting of the windscreen and side windows.
With manual air
conditioning

Switching on

The rear screen demisting/defrosting can only operate when the engine is running. )
Press this button to demist/defrost the rear screen and (depending on version) the door mirrors. The indicator lamp associated with
the button comes on.

With Stop & Star t, when demisting hasbeen activated, the STOP mode is not available.


Switching off

The demisting/defrosting switches off automatically
to prevent an excessive consumption of current. )It is possible to stop the demisting/defrosting
operation before it is switched off automaticallyby pressing the button again. The indicator
lamp associated with the button goes off.
With dual-zone digital air
conditioning
Automatic visibility programme)Put the temperature and distributioncontrols to the dedicated marked position. )Switch on the air conditioning by pressing
the "A/C"button; the warning lamp in the button comes on.
) Select this programme to demist or defrost
the windscreen and side windows as quickly as possible.
The system automatically manages the air conditioning, air flow and air intake, and provides optimum distribution towards the windscreen and side windows.) To stop the programme, press either the "visibility"
button again or "AUTO", the
warning lamp on the button goes off and
the warning lamp in the "AUTO"buttoncomes on.
The system rever ts to the previous settings.

72
Comfort

















Interior fi ttings
Illuminated glove box(see details on the following page) 2.Large storage compar tment (withoutaudio system)3.12 V accessory socket(120 W)
Observe the maximum power rating toavoid damaging your accessory.4.USB port/ Auxiliar y socket(see details on following pages)5.Open storage compar tments
6.Cup holder
7.Central armrest8.Door pockets

73
3
Comfort





12 V accessory
socket

)
To connect a 12 V accessory (maximum
power: 120 Watts), lift the cover and connect a suitable adaptor.











Illuminated glove
box

It has dedicated locations for storing a water
bottle, the vehicle's handbook pack...
Its lid has locations for a pair of
glasses... )To open the glove box, raise the handle.
It is illuminated when the lid is opened (depending on version).
It houses the front passenger airbag deactivation switch A.
If the vehicle is fitted with air conditioning, it provides access to the ventilation nozzle B
,
distributing the same conditioned air as the
vents in the passenger compartment.

74
Comfort








Additional USB port


Depending on version, your vehicle may be fitted with a second USB por t, located on thecentre console.
When in use, the USB por t / Jack auxiliary
socket must not be used to charge a
por table device (risk of overload).









USB port / Jack auxiliary socket
This connection box, consisting of a JACKauxiliary socket and a USB por t, is located on
the centre console.
It allows the connection of por table device, such as a digital audio player of the iPod ®type
or a USB memory stick.
It reads the audio files which are transmitted toyour audio system and played via the vehicle's speakers.
You can manage these files using the steeringmounted controls or the audio system controlpanel and display them in the instrument panelscreen.
When the USB por t is used, the por table device
charges automatically.
For more information on the use of thissystem, refer to the "Audio equipmentand telematics" section.

75
3
Comfort








Mats
Removable carpet protection.
When
fitting the mat for the first time, on the
driver's side use only the fixings provided in the
wallet attached.
The other mats are simply placed on the carpet.


Fitting

Removal

To remove the mat on the driver's side:)move the seat as far back as possible, )unclip the fixings, )remove the mat.
Refitting
To refit the mat on the driver's side: )
position the mat correctly,)
refit the fixings by pressing,)
check that the mat is secured correctly.
To avoid any risk of jamming of thepedals:- only use mats which are suited to the fixings already present in the vehicle; these fixings must be used, - never fit one mat on top of another.The use of mats not approved by PEUGEOT may inter fere with access to the pedals and hinder the operation of the cruise control / speed limiter.

76
Comfort








Boot fi ttings
Rear parcel shelf(see following page for details)2.Hooks(see following page for details)3.Boot lamp4.Retaining strap5.Stowing rings(depending on version)

77
3
Comfort
Rear parcel shelf Hooks
To remove the shelf: )unhook the two cords, )raise the shelf slightly, then remove it.
You have two stora
ge options:


- either upright behind the front seats,

- or upright behind the rear seats.The hooks can be used to secure shopping
ba
gs.

78
Comfort
Warning triangle (stowing)
Before getting out of your vehicle to
assemble the triangle and place it on the road, put on your high visibility vest.
The dimensions o
f the triangle (once folded) or
its storage box must be:
- A: length = 438mm,
- B: height = 56
mm, -C: width = 38mm.
The location for stowing a folded triangle or its box is under the front seat.

These are the internationally recognisedvalues. Use the triangle in line with local driving
regulations.
R
efer to the manufacturer's instructions for useof the triangle.

Placing the triangle in the
road
) Place the triangle at a distance behind
the vehicle, as shown in the table below,
accordin
g to the type of road and the levelof ambient light.
Distance from your vehicle (in metres)
Road
Motorway
DayNight

50 m 80 m 150 m
The trian
gle is available as an accessory, contact a PEUGEOT dealer or a qualified
workshop.