remote start PEUGEOT 3008 2010 Owners Manual
Page 72 of 315
71
Unfolding the key
Unlocking the vehicle
Press the open padlock to
unlock the vehicle.
Complete unlocking using the
remote control
REMOTE CONTROL KEY
System which permits central unlock-
ing or locking of the vehicle using the
lock or from a distance. It is also used to
locate and start the vehicle, as well as
providing protection against theft. Complete unlocking using the key
Turn the key to the left in the driver's
door lock to unlock the vehicle.
U n l o c k i n g i s c o n fi r m e d b y r a p i d fl a s h i n g
of the direction indicators for approxi-
mately two seconds.
According to version, the door mirrors
unfold at the same time.
Selective unlocking using the
remote control
Selective unlocking using the key
Turn the key to the left in the driver's
door lock once to unlock the driver's
door only.
Turn the key to the left in the driver's
door lock again to unlock the other
d o o r s a n d t h e b o o t .
Press the open padlock
once to unlock the driver's
door only.
Press the open padlock again to un-
l o c k t h e o t h e r d o o r s a n d t h e b o o t . E a c h u n l o c k i n g i s c o n fi r m e d b y r a p i d
fl a s h i n g o f t h e d i r e c t i o n i n d i c a t o r s f o r
approximately two seconds.
According to version, the door mirrors
u n f o l d a t t h e s a m e t i m e a s t h e fi r s t u n -
locking action.
T h e s e l e c t i v e u n l o c k i n g i s o n l y a v a i l a b l e
o n v e r s i o n s fi t t e d w i t h d e a d l o c k i n g .
The complete or selective
unlocking parameter is set
via the multifunction screen
c o n fi g u r a t i o n m e n u .
C o m p l e t e u n l o c k i n g i s a c t i v a t e d b y d e f a u l t .
F i r s t p r e s s t h i s b u t t o n t o
unfold the key.
Page 76 of 315
75
Lost keys
V i s i t a P E U G E O T d e a l e r w i t h t h e v e h i c l e ' s V 5 r e g i s t r a t i o n d o c u m e n t a n d
y o u r p e r s o n a l i d e n t i fi c a t i o n d o c u m e n t s .
T h e P E U G E O T d e a l e r w i l l b e a b l e t o r e t r i e v e t h e k e y c o d e a n d t h e t r a n s p o n d e r
code required to order a replacement key. Do not throw the remote con-
t r o l b a t t e r i e s a w a y , t h e y c o n t a i n
metals which are harmful to the
environment.
Take them to an approved collection
point.
Remote control
The high frequency remote control is a sensitive system; do not o perate it while
i t i s i n y o u r p o c k e t a s t h e r e i s a p o s s i b i l i t y t h a t i t m a y u n l o c k t h e v e h i c l e , w i t h o u t
y o u b e i n g a w a r e o f i t .
D o n o t r e p e a t e d l y p r e s s t h e b u t t o n s o f y o u r r e m o t e c o n t r o l o u t o f r a n g e a n d
out of sight of your vehicle. You run the risk of stopping it from working and the
r e m o t e c o n t r o l w o u l d h a v e t o b e r e i n i t i a l i s e d .
The remote control does not operate when the key is in the ignition, even when
the ignition is switched off, except for reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment
b y t h e e m e r g e n c y s e r v i c e s m o r e d i f fi c u l t i n a n e m e r g e n c y .
A s a s a f e t y p r e c a u t i o n ( w i t h c h i l d r e n o n b o a r d ) , r e m o v e t h e k e y f r o m t h e i g n i t i o n
when you leave the vehicle, even for a short time.
Anti-theft protection
D o n o t m a k e a n y m o d i fi c a t i o n s t o t h e e l e c t r o n i c e n g i n e i m m o b i l i s e r s y s t e m ; t h i s
could cause malfunctions.
When purchasing a second-hand vehicle
H a v e t h e k e y c o d e s m e m o r i s e d b y a P E U G E O T d e a l e r , t o e n s u r e t h a t t h e k e y s
in your possession are the only ones which can start the vehicle.
Page 91 of 315
88
Manual guide-me-home lighting
Temporarily keeping the dipped beam
headlamps on after the vehicle's igni-
tion has been switched off makes the
driver's exit easier when the light is
poor.
Switching on
W i t h t h e i g n i t i o n o f f , " fl a s h " t h e
headlamps using the lighting stalk.
A f u r t h e r " h e a d l a m p fl a s h " s w i t c h e s
the function off.
Switching off
The manual guide-me-home lighting
switches off automatically after a set
time.
System which permits switching on of the
s p e c i a l l a m p s a t t h e f r o n t ( l o w p o w e r ) , s o
that you can be seen during the daytime.
The daytime running lamps come on
automatically when the vehicle is start-
e d , i f fi t t e d * .
The instruments and controls (multi-
function screen, air conditioning control
p a n e l , . . . ) a r e n o t l i t , e x c e p t w h e n t h e
lighting is switched on manually or auto-
matically.
* A c c o r d i n g t o c o u n t r y .
EXTERIOR WELCOME LIGHTING
The remote switching on of the light-
ing makes your approach to the vehicle
easier in poor light. It is activated ac-
cording to the level of light detected by
the brightness sensor.
Switching on
Switching off
Programming
In countries in which this
function is not imposed by
regulations, you can acti-
vate or deactivate it via the
m u l t i f u n c t i o n s c r e e n c o n fi g -
uration menu.
Programming
The lighting duration is
selected via the multifunc-
t i o n s c r e e n c o n fi g u r a t i o n
menu.
The duration of the welcome
lighting is associated with and
identical to that of the auto-
matic guide-me-home lighting.
In countries in which it is imposed by
regulations:
- by default, this function is activated,
- the sidelamps and the number plate l a m p s a r e a l s o s w i t c h e d o n * .
Press the open padlock on
the remote control.
The dipped beam headlamps and the
sidelamps come on; your vehicle is also
unlocked.
In some climatic conditions
(e.g. low temperature or hu-
m i d i t y ) , t h e p r e s e n c e o f m i s -
ting on the internal surface of
the glass of the headlamps and rear
lamps is normal; it disappears after
the lamps have been on for a few
minutes.
The exterior welcome lighting switches
off automatically after a set time, when
the ignition is switched on or on locking
the vehicle.
Page 93 of 315
88
Manual guide-me-home lighting
Temporarily keeping the dipped beam
headlamps on after the vehicle's igni-
tion has been switched off makes the
driver's exit easier when the light is
poor.
Switching on
W i t h t h e i g n i t i o n o f f , " fl a s h " t h e
headlamps using the lighting stalk.
A f u r t h e r " h e a d l a m p fl a s h " s w i t c h e s
the function off.
Switching off
The manual guide-me-home lighting
switches off automatically after a set
time.
System which permits switching on of the
s p e c i a l l a m p s a t t h e f r o n t ( l o w p o w e r ) , s o
that you can be seen during the daytime.
The daytime running lamps come on
automatically when the vehicle is start-
e d , i f fi t t e d * .
The instruments and controls (multi-
function screen, air conditioning control
p a n e l , . . . ) a r e n o t l i t , e x c e p t w h e n t h e
lighting is switched on manually or auto-
matically.
* A c c o r d i n g t o c o u n t r y .
EXTERIOR WELCOME LIGHTING
The remote switching on of the light-
ing makes your approach to the vehicle
easier in poor light. It is activated ac-
cording to the level of light detected by
the brightness sensor.
Switching on
Switching off
Programming
In countries in which this
function is not imposed by
regulations, you can acti-
vate or deactivate it via the
m u l t i f u n c t i o n s c r e e n c o n fi g -
uration menu.
Programming
The lighting duration is
selected via the multifunc-
t i o n s c r e e n c o n fi g u r a t i o n
menu.
The duration of the welcome
lighting is associated with and
identical to that of the auto-
matic guide-me-home lighting.
In countries in which it is imposed by
regulations:
- by default, this function is activated,
- the sidelamps and the number plate l a m p s a r e a l s o s w i t c h e d o n * .
Press the open padlock on
the remote control.
The dipped beam headlamps and the
sidelamps come on; your vehicle is also
unlocked.
In some climatic conditions
(e.g. low temperature or hu-
m i d i t y ) , t h e p r e s e n c e o f m i s -
ting on the internal surface of
the glass of the headlamps and rear
lamps is normal; it disappears after
the lamps have been on for a few
minutes.
The exterior welcome lighting switches
off automatically after a set time, when
the ignition is switched on or on locking
the vehicle.
Page 212 of 315
PRACTICAL INFORMATION
187
Disconnecting the cables
R a i s e t h e l o c k i n g t a b f u l l y .
Reconnecting the cables
Position the open clip 1 of the cable
on the positive terminal (+) of the
b a t t e r y .
Press vertically on the clip 1 t o p o s i -
t i o n i t c o r r e c t l y a g a i n s t t h e b a t t e r y .
Lock the clip by lowering the tab 2 .
D o n o t f o r c e t h e t a b a s l o c k i n g w i l l n o t
be possible if the clip is not positioned
c o r r e c t l y ; s t a r t t h e p r o c e d u r e a g a i n . D o n o t d i s c o n n e c t t h e t e r m i -
n a l s w h i l e t h e e n g i n e i s r u n -
n i n g .
D o n o t c h a r g e t h e b a t t e r i e s
w i t h o u t d i s c o n n e c t i n g t h e t e r -
m i n a l s fi r s t .
D o n o t p u s h t h e v e h i c l e t o s t a r t t h e
e n g i n e i f i t i s fi t t e d w i t h a 6 - s p e e d
e l e c t r o n i c g e a r c o n t r o l g e a r b o x o r a n
a u t o m a t i c g e a r b o x .
The batteries contain harmful
substances such as sulphuric
a c i d a n d l e a d . T h e y m u s t b e
d i s p o s e d o f i n a c c o r d a n c e w i t h r e g u -
l a t i o n s a n d m u s t n o t , i n a n y c i r c u m -
s t a n c e s , b e d i s c a r d e d w i t h h o u s e h o l d
w a s t e .
Take used remote control batteries
a n d v e h i c l e b a t t e r i e s t o a s p e c i a l c o l -
l e c t i o n p o i n t .
Charging the battery using a
battery charger
D i s c o n n e c t t h e b a t t e r y f r o m t h e
v e h i c l e .
F o l l o w t h e i n s t r u c t i o n s f o r u s e p r o -
vided by the manufacturer of the
c h a r g e r .
R e c o n n e c t s t a r t i n g w i t h t h e n e g a -
t i v e t e r m i n a l ( - ) .
C h e c k t h a t t h e t e r m i n a l s a n d c o n n e c -
t o r s a r e c l e a n . I f t h e y a r e c o v e r e d w i t h
s u l p h a t e ( w h i t i s h o r g r e e n i s h d e p o s i t ) ,
r e m o v e t h e m a n d c l e a n t h e m .
I t i s a d v i s a b l e t o d i s c o n n e c t
the battery if the vehicle is to
be left unused for more than
o n e m o n t h . Before disconnecting the battery
W a i t 2 m i n u t e s a f t e r s w i t c h i n g o f f t h e i g -
n i t i o n b e f o r e d i s c o n n e c t i n g t h e b a t t e r y .
C l o s e t h e w i n d o w s a n d t h e d o o r s b e -
f o r e d i s c o n n e c t i n g t h e b a t t e r y .
Following reconnection of the battery
F o l l o w i n g r e c o n n e c t i o n o f t h e b a t t e r y ,
switch on the ignition and wait 1 minute
before starting to permit initialisation
o f t h e e l e c t r o n i c s y s t e m s . H o w e v e r , i f
p r o b l e m s r e m a i n f o l l o w i n g t h i s o p e r a -
t i o n , c o n t a c t a P E U G E O T d e a l e r .
R e f e r r i n g t o t h e c o r r e s p o n d i n g s e c t i o n ,
y o u m u s t y o u r s e l f r e i n i t i a l i s e :
- t h e r e m o t e c o n t r o l k e y ,
- t h e p a n o r a m i c s u n r o o f b l i n d ,
- t h e G P S s a t e l l i t e n a v i g a t i o n s y s t e m .