bulb PEUGEOT 3008 DAG 2009 Owners Manual

89
DIRECTIONAL LIGHTING
When the dipped or main beam head-
lamps are on, this function enables the
light beam to follow the direction of the
road.
The use of this function, coupled with the
xenon headlamps only, considerably im-
proves the quality of your lighting when
cornering.

with directional lighting

without directional lighting
Programming
Operating fault
The function is activated or
deactivated via the multi-
function display confi gura-
tion menu.
If a malfunction occurs, this warn-
ing light fl ashes on the instrument
panel, accompanied by a mes-
sage on the multifunction display.
Consult a PEUGEOT dealer.
AUTOMATIC ADJUSTMENT OF THE XENON HEADLAMPS
If a malfunction occurs, do not
touch the xenon bulbs. Consult
a PEUGEOT dealer.
In order to avoid causing a nuisance to
other road users, this system corrects
the height of the xenon headlamps beam
automatically and when stationary, in rela-
tion to the load in the vehicle.
If a malfunction occurs, this warn-
ing lamp is displayed on the in-
strument panel, accompanied by
an audible signal and a message
on the multifunction screen.
The system then places your head-
lamps in the lowest position.
When stationary or moving
at very low speed or when
reverse gear is engaged, the
function is inactive.
The status of the function remains
in the memory when the ignition is
switched off.

LAYOUT
105

 Raise the boot carpet, hooking the
two cords on the hooks, then gain
access to the storage box.
Depending on the confi guration, this
has areas for storing:
- a box of spare bulbs,
- a fi rst aid kit,
- a tyre repair kit,
- two warning triangles,
- ... Storage box CD changer
This holds up to 6 discs.
Access
- Place the fl oor in the low position.
- Remove the fl ap by turning its button.
- Pivot the changer towards you then change the discs, one by one.
- Put the changer back in its location.
- Close the fl ap correctly to prevent the changer from coming out of its
location while driving. The use of copied compact
discs may cause faults.
Insert circular compact discs
only.

LAYOUT
105

 Raise the boot carpet, hooking the
two cords on the hooks, then gain
access to the storage box.
Depending on the confi guration, this
has areas for storing:
- a box of spare bulbs,
- a fi rst aid kit,
- a tyre repair kit,
- two warning triangles,
- ... Storage box CD changer
This holds up to 6 discs.
Access
- Place the fl oor in the low position.
- Remove the fl ap by turning its button.
- Pivot the changer towards you then change the discs, one by one.
- Put the changer back in its location.
- Close the fl ap correctly to prevent the changer from coming out of its
location while driving. The use of copied compact
discs may cause faults.
Insert circular compact discs
only.

PRACTICAL INFORMATION
172
Risk of electrocution
Xenon bulbs (D1S-35W) must
be replaced by a PEUGEOT
dealer.
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb without the use of
tools.
Model with halogen lights

1. Direction indicators (HP24-24W).

2. Dipped headlamps (H7-55W).

3. Main beam headlamps (H7-55W).

4. Daytime lights (HP24-24W).

5. Fog lamps (PS24-24W).

6. Side lights (W5-5W).
1. Direction indicators (HP24-24W).

2. Dipped/main beam headlamps
(D1S-35W).

3. Daytime/side lights (P21/5W).

4. Fog lamps (PS24-24W).
Model with xenon lights a
nd
directional headlamps In some climatic conditions
(e.g. low temperature or hu-
midity), the presence of mist-
ing on the internal surface of the glass
of the headlamps and rear lamps is
normal; it disappears after the lamps
have been on for a few minutes.
The headlamps are fi tted with
polycarbonate glass with a
protective coating:

 do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,

 use a sponge and soapy water,

 when using a high pressure wash-
er on persistent marks, do not di-
rect at the lamps or their outlines
for too long, so as not to damage
their coating and their seals.
Front lamps

 Do not touch the bulb directly with
your fi ngers, use lint-free cloths.
Changing a halogen bulb should only
be done after the headlamp has been
switched off for a few minutes (risk of
serious burns).
It is imperative to use only anti-ultra-
violet (UV) type bulbs in order not to
damage the headlamp.

PRACTICAL INFORMATION
173
Changing main beam headlamp and
side light bulbs
Changing dipped headlamp bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Disconnect the bulb connector.

 Extract the bulb by pulling and
change it.
To refi t, carry out these operations in re-
verse order.
 Remove the protective plastic cover
by pulling on the tab.

 Disconnect the bulb connector.

 Remove the bulb by pulling and
change it.
To refi t, carry out these operations in re-
verse order.
Changing dipped headlamp
and main beam headlamp
bulbs (xenon model)
Consult a PEUGEOT dealer.
Changing direction indicator bulbs
Consult a PEUGEOT dealer.

PRACTICAL INFORMATION
174
Changing side light bulbs (xenon
model)

 Remove the protective plastic cover
by pulling on the tab.

 Disconnect the bulb connector.

 Remove the bulb by pulling and
change it.
To refi t, carry out these operations in re-
verse order. Changing foglamp bulbs
You can also contact a
PEUGEOT dealer to have
these bulbs changed. Consult a PEUGEOT dealer.

 Insert a screwdriver towards the
centre of the repeater between the
repeater and the base of the mirror.

 Tilt the screwdriver to extract the re-
peater and remove it.

 Disconnect the repeater connector.
To refi t, carry out these operations in re-
verse order.
Contact a PEUGEOT dealer to obtain
replacement repeaters.
Changing integrated direction
indicator side repeaters
Changing daytime light
bulbs
Consult a PEUGEOT dealer.

PRACTICAL INFORMATION
175
Rear lights

1. Brake/side lights (P21-5W).

2. Reversing lights (P21W).

3. Direction indicators
(PY21W-21W).

4. Side lights (P5-5W).

5. Fog lamps (P21W). Changing brake/side light, reversing
light and direction indicator bulbs

 Press the six tabs and remove the
bulb holder.

 Remove the plastic cover.

 Remove the two light fi xing nuts.

 Extract the light carefully from the
outside.

 Disconnect the light connector.

 Turn the bulb a quarter of a turn and
change it.
To refi t, carry out these operations in re-
verse order.

PRACTICAL INFORMATION
176
Changing the third brake light bulb Changing the number plate light
bulbs (W5-5W)

 Insert a thin screwdriver into one of
the outer holes of the lens.

 Push it outwards to unclip.

 Remove the lens.

 Pull the bulb and change it.
Changing side light bulbs (boot) Changing fog lamp b
ulbs

 Open the boot.

 Remove the plastic fl ap using a
screwdriver.

 Remove the light fi xing nut.

 Turn the bulb a quarter of a turn and
change it.
To refi t, carry out these operations in re-
verse order.
 Reach under the bumper.

 Turn the bulb a quarter of a turn and
change it.
Consult a PEUGEOT dealer.

PRACTICAL INFORMATION
191
The fi tting of electrical equip-
ment or accessories which
are not recommended by
PEUGEOT may result in a failure of
your vehicle's electronic system.
Please note this specifi c warning.
You are advised to contact a repre-
sentative of the Marque to be shown
the range of recommended equip-
ment and accessories. Depending on the country in
which the vehicle is sold, it is
compulsory to have a safety
jacket, warning triangle and spare
bulbs available in the vehicle.
"Styling":
"Universal":
You can obtain "Van" conversion kits to
transform a private vehicle into a van. seat covers compatible with
side air bags, aluminium gear
lever knob, fog lamps, sun-
roof ** , door defl ectors, spoiler,
styling strips, alloy wheels,
trims, sport exhaust, body-
work kit.
screenwash, interior and exte-
rior maintenance and cleaning
products.
** Sunroof which must be fi tted by the PEUGEOT network.