ESP PEUGEOT 307 2003 Owners Manual


Battery charge warning light
3-
&


&-


-


,&-
+
*

&


,-
-

.


&&
'
)4

)





"Battery charge
fault" 
-

*&
'4+


&
&
H *4
'
*
-
&-
& &.
H 
)4



.
H 
&

&<

).
H 

*+
&

5=:3 +
Anti-lock braking system (ABS) warninglight
3-
-
&


*
 &
&-


-


,&-
+
*





&


)1
B
'-

<
- .
-
&

*&
*
-
$+
,1.
-
1-&

&1

1
)<+


*
-
-

&&
'

)4

)


-
 ''ABS fault'' 
-


*&
'4+
&

5=:3 + Electronic stability programme (ESP/ASR)warning light
3-
&


*

&

&-


-


,&-
+
*
-
-




&


,-
-




-
1-&


1.


&&
'
)4

)


-

''ESP/ASR system not functioning''

-

*&
'4"
&&

5=:3 +
7-
-




-
1-&


1.

*-
*
-
4



&1+



&4
,-
-
4



+
Engine diagnosticswarning light
3-
&


&-


-


,&-
+
*

&


,-
-

.
&&
'
)4

)


-



-

*&

'4 H "Antipollution fault" .

&

*&

-


& 4
+
H "Unblock diesel filter" &
-

*

*
-
'&



*


>&'
4
'
)
1
&
&
'.

**&
I
.
+++ +
3

-
*.
4

1

1.



')
,-
**&
&
'
.


'
*
6

'-
C
<
-

)1
*


*1



-
,
-

 +
*
-
,
-


.
&
&

5=:3 + Note:
*,
'
'
*
-
1-&

14
,
'


.
4

4.

>&'
&&

&.
&


*
,
1'

-
>-

&&
+
3-


-1
4
**&

-
1-&J
'*
&


-
1
+
*

*-
,-
-



.
&&
'
)4

)


-


"Catalytic
converter fault" 
-

*&

'4.

&


*&

-
I&


4
+
3-


<
*



-
&
4&
&1
'

4 +
&

5=:3 



')+
INSTRUMENTS AND CONTROLS 31

29-09-2003
YOUR 307 IN DETAIL77
The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
– accept the last details input by means of the "OK"function,
– input the details of your destination,
– automatically input the details of your current location by means of the "Curr. loc." function.
GPS details
The last address entered is displayed. There are three options for defining the location in which you wish to obtain thisservice:
– accept the last address entered
using the "OK"function,
– fill in the "Town"and "Road" zones,
– automatically enter the name of your current location using the
"Curr. loc." function.
Selecting a service If you wish to be directed to a service, select the
categorycorresponding
to the service, then confirm by pressing the dial. The list of services corresponding to the category selected is displayed. Select the servicethen confirm by
pressing the dial to access the "Choice of a location" function.
An indication on the edge of the screen (x/n) shows you the maximum number ofestablishments providing the same ser-vice within a radius of 30 miles (50 km), asthe crow flies, from the selected location. Use buttons "<"and ">"to consult the
list provided.When the establishment of your choice is displayed, you can:
 select the "OK"function to acti-
vate guidance towards this service,
 select the "Store"function to enter
this establishment in your directory.
Note:
if the service selected is not avail-
able in the programmed location, a temporary message informs you of this. Following validation of the location, the service closest to it is displayed.The distance indicated is the distanceas the crow flies from the service tothe selected location.

29-09-2003
YOUR 307 IN DETAIL79
The menu ''Guidance options''
provides access to the following functions:
– changing of the route calculation criteria,
– voice synthesis adjustment of guidance messages,
– description of the information relating to the navigation CD-Rom,
– management of the addresses stored in the directory.
Guidance options
The last criterion used is displayed. Select a criterion from the list, then validate by pressing the dial. When the criterion of your choice has been selected, select the
"OK"
function then confirm by pressing thedial. Adjusting the voice synthesiser Select the type of voice "male"or
"female" , after inserting the configu-
ration CD-Rom.
Adjust the volume of the voice synthesis by turning the dial, then validate bypressing the dial. Note: the volume can also be adjusted
during a message, using the audio/ telephone button or the steeringwheel control. Management of the directory This function enables you to rename
an address stored in the directory. Select the description corresponding to the stored address to be changed. Select the
"Rename" function, then
confirm by pressing the dial.Select the "OK"function, then confirm
by pressing the dial to record the changes made. Stopping/Resuming guidance
 "Stop guidance" During guidance, select this function then validate.
 "Resume guidance" In the absence of guidance, select this function then validate to activateguidance to the last destination programmed. Note: after re-starting the engine, a
screen appears enabling you to resume guidance activated before
the ignition was switched off.
Calculation criteria

29-09-2003
S:sport programme
:snow programme
P ark :to immobilise the vehicle or start the engine ,
with the handbrake on or off.
R everse :to reverse (select this function with the vehicle
stationary, engine at idle). N eutral :to start the engine and to park, with the
handbrake on. Note: if function Nis engaged inadvertently while
driving, allow the engine to return to idle before engaging function Dto accelerate.
D rive :for driving in automatic mode.
M anual :for driving in manual mode.
YOUR 307 IN DETAIL
130
Moving off
With the engine running, to move off from position P:
 it is essential to press the
brake pedal to exit position P,
 select function R, D or M, then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
You can also move off from position N:
 release the handbrake, with yourfoot on the brake,
 select function R, D or M, then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
WARNING When the engine is at idle, brakes not applied, if function R, D or Mis select-
ed the vehicle moves even withoutthe accelerator being pressed. For this reason, do not leave chil-
dren unsupervised inside the vehicle, with the engine running .
When maintenance operations needto be carried out with the engine run-ning, apply the handbrake and selectposition P.
"PORSCHE TIPTRONIC SYSTEM" AUTOMATIC GEARBOX The four speed automaticgearbox offers a choice between the comfort of
integral automatic operation , enhanced by a sport and a snowprogramme,
or the pleasure of manual gear changing .
Gear selection gate  Move the lever in the gate to select a function. Once the function is selected, the corresponding indicator light appears on
the instrument panel display.

29-09-2003
TRACTION CONTROL (ASR)
AND DYNAMIC STABILITY
CONTROL (ESP) These systems are linked and com-
plement the ABS.
The ASR system optimises drive to prevent the wheels skidding, by act-ing on the brakes of the drive wheelsand on the engine. It also allows thedirectional stability of the vehicle tobe improved on acceleration. If there is a variation between the tra- jectory followed by the vehicle and
that required by the driver, the ESPsystem automatically acts on theengine and the brake of one or morewheels, in order to put the vehicleback on course.Operating check
When a malfunction of thesystems occurs, the switchlight flashes and the warninglight comes on, accompa-nied by an audible signal
and the message "ESP/ASR not
functioning" on the multifunction
display.
Contact a PEUGEOT dealer to have the system checked.
YOUR 307 IN DETAIL
134
Disarming the ASR/ESP systems In exceptional conditions (starting a vehicle which is bogged down, stuck
in snow, on soft ground, ...), it may
be advisable to disarm the ASR and
ESP systems, so that the wheels canmove freely and regain grip. 
Press the "ESP OFF" switch,
located on the central section of the fascia.
The switch lights up and thewarning light comes on: the
ASR and ESP systems aredisarmed.
These are triggered again:  automatically if the ignition is
switched off,
 automatically above 30 mph (50 km/h),
 manually by pressing the switchagain.
Operation of the ASR and ESP systems
The warning light flashes if
the ASR or ESP is activated.
The ESP/ASR systems offer exceptional safety innormal driving, but thisshould not encourage thedriver to take extra risks
or drive at high speed. The correct functioning of these systems depends on observationof the manufacturer's recommen-dations regarding the wheels (tyresand rims), the braking components,the electronic components, and thePEUGEOT assembly and opera-tion procedures. After an impact, have the system
checked by a PEUGEOT dealer.

29-09-2003
Selecting the function Place switch 1in the CRUISE posi-
tion. The cruise control is not yet active and no speed has been
memorised. The display indicates:
Switching the function off  Place switch 1in position 0or
LIMIT to switch the system off.
Activation/memorising a speed As soon as you reach the chosen speed, press button 2or 3. This
memorises the speed, which will
be maintained automatically. Thedisplay indicates (e.g. at 80 mph(130 km/h)): Note: It is possible to accelerate and
drive momentarily at a speed greater
than the memorised speed. Thevalue memorised flashes. When theaccelerator pedal is released, thevehicle will return to the memorisedspeed.
CRUISE CONTROL/SPEED LIMITER* Cruise control function:
this enables
the vehicle to maintain a steady speed
programmed by the driver, regardlessof the road characteristics and withoutthe driver having to touch the accelera-tor or brake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h) with at least fourthgear engaged (second gear for theautomatic gearbox), with the engine
running .
* During the year, according to engine.
YOUR 307 IN DETAIL
136
Cancelling the memorised speed If you wish to cancel the memorised speed: Press button 4or the brake or clutch
pedal. The display indicates (e.g. at 80 mph (130 kmh)):
Note: the speed memorised is can-
celled automatically if the vehiclespeed is less than 25 mph (40 kmh),or if the manual gearbox is in a gearlower than fourth (second gear forthe automatic gearbox) or if the ESPis activated. Recalling the memorised speed After cancellation, press button 4.
Your vehicle will return to the last
memorised speed. The display indi-cates (e.g. at 80 mph (130 km/h)):


Engine compartment fuses Fuse box












 
*



 +. 




Carefully close the cover and refit the style cover when you have fin-ished.
PRACTICAL INFORMATION 163
Fuse N¡ Rating Functions
1* 50 A 4



2* 30 A ;1#:831

 
3* 30 A ;1#:831



4* 70 A 3
 

1 
) 

5* 70 A 3
 

1 
) 

6* Ð 9

7* 30 A )






8* 70 A #
 

 



The electrical system of your vehicle is designedto operate with standardor optional equipment.
Before installing other electricalequipment or accessories on yourvehicle, contact a PEUGEOT
dealer. PEUGEOT will not accept respon- sibility for the cost incurred inrepairing your vehicle or for recti-fying the malfunctions resultingfrom the installation of acces-sories not supplied and not rec-ommended by PEUGEOT and notinstalled in accordance with itsinstructions, in particular wherethe equipment in question con-sumes more than 10 mil-liamperes.
* The maxi-fuses provide addi- tional protection for the electrical
systems. All work on the maxi-fuses and external fuses mustbe carried out by a PEUGEOT
dealer.
Rating Functions
FV1* 20 A 1





FV2* 30 A "



External
fuse N¡