Peugeot 307 2005 Owner's Guide

Instruments and controls28 -
01-06-2005
29Instruments and controls-
01-06-2005
Colour screen DT
- the "Current information" with:
• the range,
• the current consumption,
• the distance still to be driven.
- 'Route 1' with:
• the distance travelled,
• the average consumption,
• the average speed,
- 'Route 2' with the same features
for a second route.
Monochrome screen CT
- the 'vehicle' tab with:
• the range, the current consump- tion and the distance still to be
driven,
- tab '1' (route 1) with:
• the average speed, the average consumption and the distance
driven calculated over route "1"
- tab '2' (route 2) with the same fea-
tures for a second route.
Zero re-set
When the required route is displayed,
press the button for more than two
seconds.
Zero re-set
When the required route is dis-
played, press the button for more
than two seconds.
Range
This shows the distance that can still
be covered with the fuel remaining in
the tank in accordance with the aver-
age consumption over the last few
miles (kilometres) driven.
This igure may increase if there
is a change in the style of driving
or the road surface, producing a
signiicant drop in current con-
sumption.
When the range is less than 20 miles
(30 km), dashes are displayed. After
illing with at least 5 litres of fuel,
the range is recalculated and is
displayed when it exceeds 62 miles
(100 km).
If dashes are displayed for long periods
instead of digits, contact a PEUGEOT
dealer.
Current consumption
This is the average quantity of fuel con-
sumed during the last few seconds.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
Average consumption
This is the average fuel consump-
tion since the computer was last set
to zero.
Distance travelled
This indicates the distance travelled
since the computer was last set to
zero.

Instruments and controls30 -
01-06-2005
The routes "1" and ''2'' are independ-
ent but have identical application.
Route "1" for example allows you
to make daily calculations and route
"2" monthly calculations.
Distance remaining to be
travelled
This is the distance remaining to the
inal destination. It can either be cal-
culated continuously by the naviga-
tion system if guidance is activated,
or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Average speed
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
The routes Access via the general menu
Screen C
Screen CT
Screen DT
"On-board computer" menu
Press the
"MENU" button to access
the general menu.
Select the icon ''On-board compu-
ter'' , then validate to access its menu.
Depending on the multifunction dis-
play, this menu offers various choices:
- Enter distance to destination,
- Warning log.
- Status of the functions.
or
- On-board computer coniguration.
- Diagnostics.
- Status of the functions. Enter distance to destination
If guidance has not been activated,
this enables you to enter an ap-
proximate distance to inal destination
value, to permit all of the on-board
computer calculations.
Warning log
This summarises the active warning
messages, displaying them in suc-
cession on the multifunction display.
Status of the functions
This summarises the active or not
active status of the functions present
on the vehicle.
On-board computer coniguration
This function allows the distance to
the destination to be input (when
guidance is not activated; otherwise
this information is given by the navi-
gation system) and also changing of
the units of measurement (°C or °F,
km and litres or miles and gallons).
Diagnostics
This presents the information relating
to the warning log, as regards the en-
ergy remaining in the back-up battery
and the number of satellites which
can be seen by the GPS system.

31Multifunction displays-
01-06-2005
Presentation
This displays the following information:
- the time,
- the date,
- the outside temperature (this lashes if there is a risk of ice),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Emis- sion control system faulty") or informa-
tion messages (e.g.: "Auto lights on"),
displayed temporarily, can be cleared
by pressing the "ESC" button,
- the trip computer (see corresponding section).
MONOCHROME SCREEN A
(without RD4 audio equipment)Parameter coniguration
There are three display control buttons:
- "ESC" to abandon the operation in
progress,
- "MENU" to scroll through the menus
or sub-menus,
- "OK" to select the menu or sub-
menu required.
General menu
Press the "MENU" button to scroll
through the various menus of the
general menu:
- vehicle coniguration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.

Multifunction displays32 -
01-06-2005
33Multifunction displays-
01-06-2005
Vehicle coniguration
Once the "Vehicle coniguration"
menu has been selected, you can
activate or deactivate the following
equipment:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home" lighting,
- parking assistance.
Options
Once the "Options" menu has been
selected, you can start diagnostics of
the status of the equipment (active,
not active, faulty).Languages
Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil, Deutsch, English, Espanol).
Display settings
Once the "Display settings" menu
has been selected, you can gain ac-
cess to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
Units
Once the "Units" menu has been se-
lected, you can change the units of
the following parameters:
- temperature (°C or °F),
-
fuel consumption (l/100, mpg or km/l).
Once you have selected a setting,
press the "OK" button to change its
value.
Wait for approximately ten seconds
without any action to allow the changed
data to be recorded or press the "ESC"
button to cancel.
The display then returns to the normal
display.For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays32 -
01-06-2005
33Multifunction displays-
01-06-2005
MONOCHROME DISPLAY A
General menu
Press the "MENU" button to gain
access to the general menu, then
press the " 5" or " 6" buttons to scroll
through the following items:
- radio-CD,
- vehicle coniguration,
- options,
- display settings,
- languages,
- units.
Press the "OK" button to select the
menu required.
Presentation
This displays the following information,
via the RD4 audio equipment control
keypad:
- the time,
- the date,
- the outside temperature (this lashes if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Emis- sion control system faulty") or infor-
mation messages (e.g.: "Auto lights
on"), displayed temporarily, can be
cleared by pressing the "ESC" button,- the trip computer (see corresponding
section).
Radio-CD
With the RD4 audio equipment
switched on, once the "Radio-CD"
menu has been selected, you can
activate or deactivate the functions
linked with the use of the radio (RDS
following, REG mode), the CD or the
CD changer (introscan, random play,
CD repeat). Vehicle coniguration
Once the "Vehicle coniguration"
menu has been selected, you can
activate or deactivate the following
equipment:
- rear wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home" lighting,
- parking assistance.Options
Once the "Options" menu has been
selected, you can start diagnostics of
the status of the equipment (active,
not active, faulty).

Multifunction displays34 -
01-06-2005
35Multifunction displays-
01-06-2005
Display settings
Once the "Display settings" menu
has been selected, you can gain ac-
cess to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.Languages
Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil, Deutsch, English, Espanol).
Units
Once the "Units" menu has been se-
lected, you can change the units of
the following parameters:
- temperature (°C or °F),
-
fuel consumption (l/100, mpg or km/l).
Once you have selected a setting,
press the "
7" or " 8" buttons to
change its value.
Press the " 5" or " 6" buttons to
move to the previous or next setting
respectively.
Press the "OK" button to record
the change and return to the normal
display or press the "ESC" button to
cancel.
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays34 -
01-06-2005
35Multifunction displays-
01-06-2005
MONOCHROME DISPLAY C
(without RD4 audio equipment)
Parameter coniguration
There are three buttons and a navi-
gator to enable you to control the
screen:
- "MENU" to display the general
menu,
- "MODE" to change the permanent
application (trip computer, date, ...),
- "ESC" to abandon the operation in
progress,
- Rotation of the navigator: move-
ment on the display or changing of
a setting,
- Press on the navigator: conirma-
tion of the selection.
Presentation
It displays the following information:
- the time,
- the date,
- the exterior temperature (this lashes if there is a risk of ice),
- the accesses check (doors, boot, ...),
- the warning messages (e.g.: "De- pollution system faulty") or informa-
tion messages (e.g.: "Automatic
headlamp lighting activated"), dis-
played temporarily, can be cleared
by pressing the "ESC" button,
- the trip computer (see corresponding section).
General menu
Press the "MENU" button to access
the general menu:
- trip computer (see corresponding section),
- personalisation-coniguration.
Turn the navigator to select the menu
required, then conirm by pressing
the navigator.
"Personalisation-
Coniguration" menu
Once this menu has been selected,
you can access the following func-
tions:
- deine the vehicle parameters,
- display coniguration,
- selection of the language.

Multifunction displays36 -
01-06-2005
37Multifunction displays-
01-06-2005
Deine the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the
following equipment:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home" lighting and du- ration,
- parking assistance. Selection of the language
Once this menu has been selected,
you can change the language
used on the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
Display coniguration
Once this menu has been selected,
you can access the following set-
tings:
- brightness-video setting,
- date and time setting,
- selection of the units.
Once you have selected a setting,
press the navigator.
Turn the navigator to change its
value.
Press the navigator to record the
change and move on to the next
setting or press the
"ESC" button to
cancel.Example: "Duration of the "follow-me-
home" lighting"
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays36 -
01-06-2005
37Multifunction displays-
01-06-2005
MONOCHROME SCREEN C
General menu
Press the "MENU" button to gain
access to the general menu:
- audio functions,
- trip computer (see corresponding section),
- personalisation-coniguration,
- telephone (hands-free kit).
Press the " 5" or " 6" buttons to se-
lect the menu required, then conirm
by pressing the "OK" button.
Presentation
This displays the following informa-
tion, via the RD4 audio equipment
control keypad:
- the time,
- the date,
- the outside temperature (this lashes
if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "De- pollution system faulty") or informa-
tion messages (e.g.: "Automatic
headlamp lighting activated"), dis-
played temporarily, can be cleared
by pressing the "ESC" button,
- the trip computer (see corresponding section).
"Audio functions" menu
With the RD4 audio equipment
switched on, once this menu has been
selected, you can activate or deacti-
vate the functions linked with the use
of the radio (RDS, REG, RadioText),
the CD or the CD changer (introscan,
random play, CD repeat).
"Personalisation-
Coniguration" menu
Once this menu has been selected,
you can gain access to the following
functions:
- deine the vehicle parameters,
- display coniguration,
- selection of the language.

Multifunction displays38 -
01-06-2005
39Multifunction displays-
01-06-2005
Deine the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the
folllowing equipment:
- wiper linked with reverse gear,
- automatic switching on of the lights,
- "follow-me-home lighting" and du- ration,
- parking assistance. Selection of the language
Once this menu has been selected,
you can change the language used
by the display (Deutsch, English,
Espanol, Français, Italiano, Neder-
lands, Portugues, Portugues-Brasil).
Display coniguration
Once this menu has been selected,
you can gain access to the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
When you have selected a setting,
press the
"OK" button, then press
the " 7" or " 8" buttons to change
its value.
Press the "OK" button to record the
change and move on to the next
setting or press the "ESC" button to
cancel.Example: "duration of follow-me-home
lighting"
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.