trip computer Peugeot 307 2007.5 Owner's Manual

INSTRUMENTS and CONTROLS
28
TRIP COMPUTER



Press the button, located at the
end of the
wipers stalk , to dis-
play the various items of trip com-
puter data in succession. The trip computer data is the follow-
ing:
System which provides current infor-
mation concerning the route travelled
(range, consumption, ...).

 Press the control for more than two
seconds to reset the distance trav-
elled, the average consumption
and the average speed to zero.
Monochrome display A Zero reset
Data displays - the range,
- the current consumption,
- the distance travelled,
- the average consumption,
- the average speed.

 The next press then returns you
to the normal display.

INSTRUMENTS and CONTROLS
29
- the current information tab with:
- the range,
- the current consump- tion,
- the distance remain- ing to be travelled,
Colour display
Route zero reset Monochrome display C

 Press the button, located at the
end of the wipers stalk , to dis-
play the various trip computer
tabs in succession:
Data displays

 When the route required is dis-
played, press the control for more
than two seconds.
- the route "1" tab with:
- the distance trav- elled,
- the average con- sumption,
- the average speed, for the i rst route. - the route
"2" tab with:
- the distance trav- elled,
- the average con- sumption,
- the average speed, for the second route.
Routes "1" and "2" are independent
but their use is identical.
Route "1" permits, for example, daily
calculations, and route
"2" monthly
calculations.
TRIP COMPUTER
System which provides current infor-
mation concerning the route travelled
(range, consumption, …).

INSTRUMENTS and CONTROLS
30
Distance remaining to be
travelled
(km or miles)
This is the distance remain-
ing to be travelled to the i nal destina-
tion. It is either calculated instantly by
the navigation system if guidance is
activated, or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Average speed
(km/h or mph)
This is the average speed cal-
culated since the last trip com-
puter zero reset (ignition on).
Range
(km or miles)
This indicates the number
of miles (or kilometres)
which can still be travelled with the
fuel remaining in the tank in relation
to the average consumption over the
last few miles (kilometres) travelled. Current consumption
(l/100 km or km/l or mpg)
This is the average quantity
of fuel consumed over the
last few seconds.
Average consumption
(l/100 km or km/l or mpg)
This is the average quan-
tity of fuel consumed since
the last trip computer zero reset.
Distance travelled
(km or miles)
This indicates the dis-
tance travelled since the
last trip computer zero
reset.
A few definitions…
When the range falls below 20 miles
(30 km), dashes are displayed. After
i lling with at least 5 litres of fuel, the
range is recalculated and is displayed
when it exceeds 60 miles (100 km). If dashes are displayed con-
tinuously while driving in
place of the digits, contact a
PEUGEOT dealer. This function is only displayed
from 20 mph (30 km/h).
This i gure may increase fol-
lowing a change of driving
style or relief, resulting in a
signii cant change in the cur-
rent consumption.

INSTRUMENTS and CONTROLS
31
Display C

 Press the "MENU" button to gain
access to the general menu.

 Press the arrows, then the "OK"
button to select the "Trip compu-
ter" menu.

 On the "Trip computer" menu,
select one of the following appli-
cations:
Warnings log
This summarises the active warning
messages, displaying them in suc-
cession on the multifunction display.
Status of the functions
This summarises the active or inac-
tive status of the functions present on
the vehicle.
Enter the distance to the
destination
This enables you to enter an approxi-
mate value for the distance to the i -
nal destination.
"TRIP COMPUTER" MENU
System which provides general infor-
mation concerning the status of certain
equipment with which your vehicle is
equipped, such as the warnings log,
the status of the functions...
"DIAGNOSTICS" MENU

 On the "Diagnostics" menu, se-
lect one of the following applica-
tions:
Colour display

 Press the "MENU" button to gain
access to the general menu.

 Turn the dial and press it to select
the "Diagnostics" menu.

MULTIFUNCTION DISPLAYS
38
* With air conditioning only.
Controls
From the RD4 audio equipment con-
trol panel, you can:

 press the "MENU" button to gain
access to the general menu ,

 press the "
" or
"" buttons to
scroll through the items on the
screen,

 press the "MODE" button to
change the permanent application
(trip computer, audio source, ...),

 press the "
" or
"" buttons to
change a setting value,

 press the "OK" button to con-
i rm,
or

 press the "ESC" button to aban-
don the operation in progress.
Displays on the screen
This displays the following information:
- the time,
- the date,
- the outside temperature * (this l ashes if there is a risk of ice),
- the status of the accesses (doors, boot, ...),
- the audio sources (radio, CD, ...),
- the trip computer (refer to the cor- responding section).
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Automatic switching
on of the headlamps activated") may
appear temporarily. These can be
cleared by pressing the "ESC" button.
General menu

 Press the "MENU" button to gain
access to the
general menu :
- audio functions,
- trip computer (refer to the cor- responding section),
- personalisation-coni guration,
- telephone (hands-free kit).

 Press the " " or " " buttons to
select the menu required, then
coni rm by pressing the "OK"
button.
MONOCHROME SCREEN C
"Audio functions" menu
With the RD4 audio equipment
switched on, once this menu has
been selected you can activate or de-
activate the functions linked with use
of the radio (RDS, REG, RadioText),
the CD or the CD changer (introscan,
shufl e, CD repeat).
For further details concerning the
"Audio functions" application, refer
to the RD4 part of the "Audio and
Telematics" section.
"Trip computer" menu
Once this menu has been selected,
you can consult information concern-
ing the status of the vehicle (warnings
log, status of the functions, ...).

178
MENUESCLIST
MENU
2
1
Press the end of the lights stalk to start the voic
e
recognition.
Say the words one by one and wait for the audible
conirmation signal between each word.
The list which follows is exhaustive.
To display the list of available voice commands, pr
ess
the end of the lights stalk to start the voice reco gnition,
then say HELP or WHAT CAN I SAY.
For the same operation, press and
hold the MENU button and select the
function VOICE COMMANDS LIST.
VOICE COMMANDS LIST LEVEL 1
display
call
changer
guide to
trafic info
CD player/jukebox
navigation
radio
SMS/message
telephone
LEVEL 2
audio
guidance
navigation
trip computer
telephone
description
disc number
previous/next disc
random play
list
track number
previous/next track
repeat
scan
description
display
read
random play
list
track number
previous/next track
directory (MP3 CD)
scan
stop/resume
directory
show
zoom out/in
autostore
list
memory
previous/next
display
read
voice mailbox
last number
voice message service
directoryLEVEL 3
1 … 20
1 ... 20
previous/next
repeat
destination
description
vehicle
1 … 6
descriptionVOICE COMMANDS
DISPLAYING THE LIST AND USING THEM

186
02GENERAL MENU
AUDIO FUNCTIONS: radio, CD,
options.
TRIP COMPUTER: distance entering,
warnings, status of functions. TELEPHONE: hands-free kit,
matching, management of a
communication.
PERSONALISATION-CONFIGURATION:
vehicle parameters, display, languages.
> MONOCHROME DISPLAY C
> MONOCHROME DISPLAY A For a detailed global view of the
menus available, refer to the
"Display low charts" section of
this RD4 chapter.

194
1
1
2
3
4
3
4
3
4
2
3
4
3
4
2
3
4
2
4
4
3
4
4
4
3
4
4
1
2
3
2
3
3
2
2
1
2
3
3
3
4
4
4
2
3
4
3
4
3
4
2
3
3
3
4
07
STATUS OF FUNCTIONS*functions activated or deactivated
AUDIO FUNCTIONS DISPLAY FLOW CHART monochrome C
* The parameters vary according to vehicle (refer to the "Multifunction displays" chapter).
WARNING LOG
diagnostics
TRIP COMPUTER
FM BAND PREFERENCES
alternative frequencies (RDS)activate/deactivate
regional mode (REG) activate/deactivate
radio-text information (RDTXT) activate/deactivate
AUDIO CD PREFERENCES CD changer repeat (RPT)
activate/deactivate
track random play (RDM) activate/deactivate
ENTER DISTANCE TO DESTINATION distance: x km PERSONALISATION-CONFIGURATION
DEFINE THE VEHICLE PARAMETERS*
CHOICE OF LANGUAGE TELEPHONE
CONSULTING DIRECTORIES** telephone directory
call log
services directorycustomer contact centre
breakdown call
emergency call
DISPLAY CONFIGURATION
video brightness adjustmentnormal video
inverse video
brightness (- +) adjustment
date and time adjustment day/month/year adjustment
hour/minute adjustment
choice of 12 h/24 h mode
choice of units l/100 km - mpg - km/l
°Celsius/°Fahrenheit
** According to compatibility of Bluetooth telephone and service contract. MANAGEMENT OF A COMMUNICATION
switch**
terminate the current call
secret modeactivate/deactivate
CONFIGURATION
deletion of a matchlist of matches
consulting matches list of matches
choice of a mobile to connect list of mobiles