Peugeot 307 Break 2005 Owners Manual

81Layout-
01-06-2005
SUN VISOR WITH
ILLUMINATED COURTESY
MIRROR
With the ignition on, the mirror is
automatically lit up when the flap is
opened.
ROOF CONSOLE
The front courtesy light and a
spectacles holder are itted in the
roof console.
To open or close the spectacles holder,
press the recess in the cover.
AREAS FOR TOLL CARDS/
CAR PARK TICKETS
The athermic windscreen has two
non-relective zones located either
side of the base of the interior mirror.
They are intended for afixing toll
cards and/or car park tickets.

Layout84 -
01-06-2005
85Layout-
01-06-2005
ENTERTAINMENT SCREEN KIT
This video assembly will enable
the rear passengers to pass the
time pleasantly while watching their
favourite ilm or playing their favourite
game, by means, in particular, of the
connection of a DVD player or games
console to the central support, itted
between the front seats.
The entertainment screen kit
consists of:
- a 16/9ths, 7 inch, LCD colour monitor with direction adjustment
in the three axes,
- two high frequency, wireless, stereo headphones,
- a removable support,
- three audio/video sockets on the ixed base and in the glove
compartment.
The monitor and the support can be
removed and stored, each in their
own protective cover.
The entertainment screen kit accepts
all types of audio/video source,
PAL/NTSC compatible, such as:
DVD player, camcorder, games
console, ...
These sources are connected to the
three audio/video sockets, AV1 in
the glove compartment or AV2 on
the ixed base.
REAR ARMREST
(SALOON AND ESTATE)
F Lower the armrest to access the
storage shelf on the seat back.
F Lift the lid. It contains a storage
tray as well as two can holders
and two pen holders.

Layout84 -
01-06-2005
85Layout-
01-06-2005
ENTERTAINMENT SCREEN KIT
This video assembly will enable
the rear passengers to pass the
time pleasantly while watching their
favourite ilm or playing their favourite
game, by means, in particular, of the
connection of a DVD player or games
console to the central support, itted
between the front seats.
The entertainment screen kit
consists of:
- a 16/9ths, 7 inch, LCD colour monitor with direction adjustment
in the three axes,
- two high frequency, wireless, stereo headphones,
- a removable support,
- three audio/video sockets on the ixed base and in the glove
compartment.
The monitor and the support can be
removed and stored, each in their
own protective cover.
The entertainment screen kit accepts
all types of audio/video source,
PAL/NTSC compatible, such as:
DVD player, camcorder, games
console, ...
These sources are connected to the
three audio/video sockets, AV1 in
the glove compartment or AV2 on
the ixed base.
REAR ARMREST
(SALOON AND ESTATE)
F Lower the armrest to access the
storage shelf on the seat back.
F Lift the lid. It contains a storage
tray as well as two can holders
and two pen holders.

Layout84 -
01-06-2005
85Layout-
01-06-2005
The upper face of the monitor
incorporates the following controls:
1. "POWER" button to switch the
monitor on/off.
2. "FUNC" button for selection of
the input source, AV1 or AV2.
3. "WIDE" button to change the
display format (normal, full
screen, wide, cinema).
4. "MENU" button for selection of
the menus and settings.
5. "5 " and "6 " buttons to change
the settings.
By pressing buttons 4 and 5, you can
adjust the brightness, the contrast,
the colours, ...
For further details, refer to the operating
manuals "Video kit operation" and
"VMA8582 7 inch LCD colour monitor".
Various controls are incorporated in
the headphones:
A. Housing for the two LR03
batteries.
B. Headphones on/off button.
C. On/off indicator light.
D. Tuning frequency adjustment
control.
E. Headphones volume adjustment
control.
To get the best out of the headphones,
you must adjust their size to suit you,
ind their tuning frequency by rotating
control D, then adjust the volume by
rotating control E.

Layout86 -
01-06-2005
87Layout-
01-06-2005

Layout86 -
01-06-2005
87Layout-
01-06-2005
BOOT LAYOUT (SALOON)
1. Rear parcel shelf
To remove the shelf:
- unhook the two strings,
-
slightly raise the shelf, then remove it.There are several options for storing
the shelf:
- either behind the front seats,
- or behind the rear seat.
2. Hooks
3. Stowing rings4. Luggage retaining net
Hooked onto the stowing rings, this
enables your luggage to be secured.
5. Open storage trays
6. 12 volt socket
This is a lighter type socket, installed
on the left-hand side of the parcel
shelf.
It is supplied with the ignition off.

Layout88 -
01-06-2005
89Layout-
01-06-2005

Layout88 -
01-06-2005
89Layout-
01-06-2005
BOOT LAYOUT (ESTATE)
1. Load space cover
To install it:
- position the front ends of the cover on its support and press gently to
put it in place,
- unfold the cover fully,
- position the rear ends of the cover on its support and press gently to
put it in place.
To remove it:
- unclip the rear ends,
- fold the cover fully,
- unclip the front ends and remove the cover.
To store it, slide it under the rear
seats (location A).
2. Floor storage trays (2/3 - 1/3)
3. Open storage trays
One of them contains the luggage
retaining net. 4. Boot loor and pillar stowing
rings
5. Rear seat stowing rings
6. Luggage retaining net
Secure the net hooks in the stowing
rings on the loor or on the folded
rear seat (two horizontal positions) or
secure the net hooks in the stowing
rings on the boot pillars and in the
loor rings at the rear of the boot (one
vertical position).
7. 12 volt socket
This is a lighter type socket, installed
on the load space cover left support.
It is supplied with the ignition off. 8. High load retaining net ixings
The high load retaining net can be
installed behind the front or rear
seats.
Open the covers of the corresponding
upper ixings.
Fit the ends of the metal bar in these
ixings.
To install the high load retaining net:
- behind the front seats, lift the rear
seat cushion, hook the net straps
on the ixings then fold the rear
seat;
- behind the rear seat, hook the net straps in the stowing rings on the
loor.
The rings are located directly below
the corresponding upper ixings.
Pull the two straps taut.
9. Grab handles and coat hooks

Safety90 -
01-06-2005
91Safety-
01-06-2005
HAZARD WARNING LIGHTS
Press the button, the direction
indicators lash.
They can operate with the ignition
off.HORN
Press one of the spokes of the
steering wheel.
Automatic lighting of hazard
warning lights*
When braking in an emergency,
depending on the deceleration,
the hazard warning lights come
on automatically. They switch off
automatically the irst time you
accelerate.
It is also possible to switch them off
by pressing the button.
* According to country.

Safety90 -
01-06-2005
91Safety-
01-06-2005
TYRE UNDER-INFLATION
DETECTION
Sensors itted in each valve check
the tyre pressure during driving and
trigger a warning in the event of
malfunction (speed above 12 mph
(20 km/h)).The service warning light
comes on on the instrument
panel, accompanied by an
audible signal and a mes-
sage on the multifunction
display locating the wheel
concerned.
Check the tyre pressures as soon as
possible. This check must be carried
out when the tyres are cold. Puncture
The
STOP warning light comes on on
the instrument panel, accompanied
by an audible signal and a message
on the multi-function display locating
the wheel concerned.
Stop immediately, avoiding any
sudden movement of the steering
wheel and the brakes.
Change the damaged wheel
(punctured or very delated tyre),
and have the tyre pressure checked
as soon as possible.
The service warning light
comes on on the instrument
panel, accompanied by an
audible signal and a mes-
sage on the multifunction
display locating the wheel or wheels
which are not detected or indicating a
fault in the system.
Contact a PEUGEOT dealer to
replace the faulty sensor(s).
Note: this message is also displayed
when one of the wheels is away from
the vehicle (being repaired) or when
one or more wheels without a sensor
are itted. All repairs and changing of
tyres on a wheel itted with
this system must be carried
out by a PEUGEOT dealer.
If, when changing a tyre,
you install a wheel which is not
detected by your vehicle (example:
itting of snow tyres), you must
have the system reinitialised by a
PEUGEOT dealer.
The tyre under-inlation detection
system is an aid to driving which does
not replace the need for the driver to
be vigilant or to drive responsibly.
This system does not eliminate
the need to have the tyre pressure
checked regularly (see manufactur-
er's label on the door pillar) to ensure
that the optimum dynamic perform-
ance of the vehicle is maintained and
prevent premature wear of the tyres,
particularly in arduous driving condi-
tions (heavy load, high speed).
The tyre pressures must be checked
cold, at least once a month.
Remember to check the pressure of
the spare wheel.
The tyre under-inlation detection
system may experience temporary
interference due to radioelectric
emissions on a frequency close to
that used by the system.
Flat tyre
Sensor(s) not detected or faulty