Peugeot 307 Break Dag 2005.5 Manual Online

Page 81 of 202

Visibility74 -
01-10-2005
75Visibility-
01-10-2005
THE LIGHTS STALK
Front and rear lights (ring A)
F Place ring A in the required posi-
tion.
Dipped/Main beam change
F Pull the stalk towards you. Vehicles itted with front fog
lamps and a rear fog lamp (ring C)
Lights off
Side lights
Dipped/main beam
headlamps Rear fog lamp
Front fog lamps (irst rota-
tion of the ring forwards) Front and rear fog
lamps (2nd rotation
of the ring forwards).
Note:
to switch off
the rear fog lamp
and the front fog lamps, turn the ring
backwards twice in succession.
Note: when the lights are switched
off automatically or when the dipped
headlamps are switched off manually,
the front fog lamps, the rear fog lamp
and the side lights will remain on.
Turn the ring backwards to switch off
the front fog lamps, the side lights will
then be switched off (only when the
lights are switched off automatically).
Vehicles itted with a rear fog
lamp (ring B)
This operates with the dipped/main
beam headlamps.
Note:
when the lights are switched off
automatically, the rear fog lamp and
the dipped headlamps will remain on.
Turn the ring backwards to switch off
the rear fog lamp. The dipped head-
lamps will then be switched off.
The front fog lamps operate with the
side lights and the dipped headlamps.
Front fog lamps and rear fog
lamp
F Turn ring B or C forwards to switch
on and backwards to switch off.
The status is conirmed by the
indicator light on the instrument
panel.
Lights on buzzer
With the ignition off and the automatic
switching on of the lights deactivated,
when the driver's door is opened, a
buzzer sounds to warn you that you
have left your lights on.
In good or rainy weather,
both day and night, the
front fog lamps and the rear
fog lamp are dazzling and
are prohibited.
Do not forget to switch them off when
they are no longer needed.

Page 82 of 202

Visibility74 -
01-10-2005
75Visibility-
01-10-2005
Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen wip-
ers stop.
Note: in foggy weather or in snow,
the brightness sensor can detect suf-
icient light. As a consequence, the
lights will not come on automatically. Deactivation
The deactivation of this function is
accompanied by a message on the
multifunction display.
The function is deactivated tempo-
rarily when you use the manual lights
stalk.
Manual "Follow-me-home" lighting
When the automatic switching
on of the lights function is deac-
tivated,
the side lights and dipped
headlamps remain on for the dura-
tion selected for the automatic "fol-
low-me-home" lighting.
If the vehicle is not itted with the
automatic switching on of the lights
function, when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
Direction indicators (lashers)
Left: downwards.
Right: upwards.
Note: if you forget to cancel the di-
rection indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow me home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights func-
tion activated , the side lights and
dipped headlamps remain on for the
selected duration. Activation:
F
switch off the engine,
F "lash" the headlamps,
F get out of the vehicle and lock it.
Deactivation:
F "lash" the headlamps again,
F get out of the vehicle and lock it.
To deactivate or activate
this function, go to the multi-
function display conigura-
tion menu.
The duration of the timed period must
also be set (15, 30, 60 seconds), via
the multifunction display conigura-
tion menu, except in the case of the
monochrome screen A for which it
is pre-set.
Cancelling:
F "lash" the headlamps,
F get out of the vehicle and lock it. To switch the function on
or off, use the multifunction
display coniguration menu.
Activation
The activation of this function is ac-
companied by a message on the
multifunction display.
The function is activated when the
manual lights stalk is in position 0.
If the brightness sensor does not
function correctly, the lights come
on accompanied by the service warn-
ing light, an audible signal and a mes-
sage on the multifunction display.
Contact a PEUGEOT dealer.
Do not cover the brightness
sensor, coupled with the
rain sensor, located in the
centre of the windscreen,
behind the interior mirror.
It is used for the automatic switching
on of the lights.

Page 83 of 202

Visibility74 -
01-10-2005
75Visibility-
01-10-2005
Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of
the windscreen wipers. They switch
off as soon as the light becomes
bright enough or the windscreen wip-
ers stop.
Note: in foggy weather or in snow,
the brightness sensor can detect suf-
icient light. As a consequence, the
lights will not come on automatically. Deactivation
The deactivation of this function is
accompanied by a message on the
multifunction display.
The function is deactivated tempo-
rarily when you use the manual lights
stalk.
Manual "Follow-me-home" lighting
When the automatic switching
on of the lights function is deac-
tivated,
the side lights and dipped
headlamps remain on for the dura-
tion selected for the automatic "fol-
low-me-home" lighting.
If the vehicle is not itted with the
automatic switching on of the lights
function, when you leave your vehicle,
the side lights and dipped headlamps
remain on for thirty seconds.
Direction indicators (lashers)
Left: downwards.
Right: upwards.
Note: if you forget to cancel the di-
rection indicator, the volume of the
audible signal will increase, if you
are driving at a speed greater than
50 mph (80 km/h).
Automatic "Follow me home"
lighting
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights func-
tion activated , the side lights and
dipped headlamps remain on for the
selected duration. Activation:
F
switch off the engine,
F "lash" the headlamps,
F get out of the vehicle and lock it.
Deactivation:
F "lash" the headlamps again,
F get out of the vehicle and lock it.
To deactivate or activate
this function, go to the multi-
function display conigura-
tion menu.
The duration of the timed period must
also be set (15, 30, 60 seconds), via
the multifunction display conigura-
tion menu, except in the case of the
monochrome screen A for which it
is pre-set.
Cancelling:
F "lash" the headlamps,
F get out of the vehicle and lock it. To switch the function on
or off, use the multifunction
display coniguration menu.
Activation
The activation of this function is ac-
companied by a message on the
multifunction display.
The function is activated when the
manual lights stalk is in position 0.
If the brightness sensor does not
function correctly, the lights come
on accompanied by the service warn-
ing light, an audible signal and a mes-
sage on the multifunction display.
Contact a PEUGEOT dealer.
Do not cover the brightness
sensor, coupled with the
rain sensor, located in the
centre of the windscreen,
behind the interior mirror.
It is used for the automatic switching
on of the lights.

Page 84 of 202

Visibility76 -
01-10-2005
77Visibility-
01-10-2005
MANUAL ADJUSTMENT OF
THE HEADLAMPS
For vehicles itted with halogen
bulbs, depending on the load in your
vehicle, adjusting the beam of your
headlamps is recommended.
0 - 1 or 2 people in the front seats.
- - 3 people.
1 - 5 people.
2 - 5 people + maximum authorised
loads.
3 - Driver + maximum authorised
loads.
Initial setting is position 0.
AUTOMATIC HEADLAMP
ADJUSTMENT
On vehicles with xenon bulbs:
when stationary, the system au-
tomatically corrects the height of
the beam, whatever the load of the
vehicle. The driver is then assured
of having optimum lighting and not
causing a nuisance to other road
users.
In cases of malfunction,
the service warning light
comes on on the instru-
ment panel, accompanied
by an audible signal and
a message on the multifunction dis-
play. The system places your head-
lamps to the low position.
Do not touch the xenon bulbs. Con-
tact a PEUGEOT dealer.
Daytime lights*
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
* According to country. The instruments and controls
(instrument panel, multifunc-
tion display, air conditioning
control panel, ...) are only lit
on switching to the automatic
switching on of the lights mode or when
the lights are switched on manually. This warning light comes
on on the instrument panel.

Page 85 of 202

Visibility76 -
01-10-2005
77Visibility-
01-10-2005
Special position of the front
windscreen wiper
In the minute following switching off
of the ignition, any action on the stalk
positions the wipers in the centre of
the windscreen.
This action enables you to position
the wiper blades for winter parking,
cleaning or replacement (See sec-
tion "Practical information - Chang-
ing a wiper blade").
To park the wipers after this has been
done, switch on the ignition and op-
erate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk to-
wards you. The windscreen wash
then the windscreen wipers operate
for a ixed period.
The headlamp wash is also activat-
ed, if the headlamps are on .
WINDSCREEN WIPER STALK
Front windscreen wiper with
automatic wipe
2 Fast wipe (heavy rain).
1 Normal wipe
(moderate rain).
I Intermittent wipe.
0 Off.
AUTO â Automatic or single wipe
(press downwards).
In the Intermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In AUTO mode, the wiping speed is
in proportion to the intensity of the
rainfall. The irst press of the stalk
downwards activates the automatic
wipe.
Subsequent presses trigger a single
wipe.
Front windscreen wiper with
intermittent wipe
2
Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
l Intermittent wipe.
0 Off.
â Single wipe (press downwards).
In the Intermittent position, the wiping
speed is in proportion to the vehicle
speed.

Page 86 of 202

Visibility78 -
01-10-2005
79Visibility-
01-10-2005
Automatic windscreen wipers
In AUTO mode, the windscreen wip-
ers operate automatically and adapt
their speed to the intensity of the
rainfall. Do not cover the rain sen-
sor located on the wind-
screen behind the interior
mirror.
When using an automatic
car wash, switch off the ignition.
In winter, it is advisable to wait for the
windscreen to completely clear of ice
before operating the automatic wipe.
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
The automatic windscreen wipers
function must be reactivated if the
ignition has been switched off for
more than one minute, by press-
ing the stalk downwards.
Rear windscreen wiper
To activate or deactivate
this function, go to the multi-
function display conigura-
tion menu.
If there is a signiicant accumulation
of snow or ice and when using a bi-
cycle carrier on the tailgate (estate),
deactivate the automatic rear wiper
by going to the multifunction display
coniguration menu.
Rear windscreen wash
Deactivation
Deactivation of the function is ac-
companied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position
I, 1 or 2.
In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in
intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Turn ring A past the irst
notch; the windscreen wash
then the windscreen wiper
operate for a ixed period.
Turn ring
A to the irst notch
for intermittent wiping.
When reverse gear is en-
gaged, if the windscreen
wipers are in operation, the
rear wiper starts.

Page 87 of 202

Visibility78 -
01-10-2005
79Visibility-
01-10-2005
Automatic windscreen wipers
In AUTO mode, the windscreen wip-
ers operate automatically and adapt
their speed to the intensity of the
rainfall. Do not cover the rain sen-
sor located on the wind-
screen behind the interior
mirror.
When using an automatic
car wash, switch off the ignition.
In winter, it is advisable to wait for the
windscreen to completely clear of ice
before operating the automatic wipe.
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
The automatic windscreen wipers
function must be reactivated if the
ignition has been switched off for
more than one minute, by press-
ing the stalk downwards.
Rear windscreen wiper
To activate or deactivate
this function, go to the multi-
function display conigura-
tion menu.
If there is a signiicant accumulation
of snow or ice and when using a bi-
cycle carrier on the tailgate (estate),
deactivate the automatic rear wiper
by going to the multifunction display
coniguration menu.
Rear windscreen wash
Deactivation
Deactivation of the function is ac-
companied by a message on the
multifunction display.
The function is deactivated when the
windscreen wipers stalk is moved to
position
I, 1 or 2.
In the event of malfunction of the
automatic windscreen wipers, the
windscreen wipers will operate in
intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Turn ring A past the irst
notch; the windscreen wash
then the windscreen wiper
operate for a ixed period.
Turn ring
A to the irst notch
for intermittent wiping.
When reverse gear is en-
gaged, if the windscreen
wipers are in operation, the
rear wiper starts.

Page 88 of 202

Visibility78 -
01-10-2005
79Visibility-
01-10-2005
COURTESY LIGHTS
1. Front courtesy light2. Map reading lights
Permanently off.
Permanently on.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds
after the last door is closed.
In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location function is used. Different lighting times are available:
- with the ignition off or on, approxi-
mately 10 minutes,
- in economy mode, approximately 30 seconds,
- when the engine is running, no limit. With the ignition on, press
the corresponding switch.

Page 89 of 202

Visibility80 -
01-10-2005
3. Rear courtesy lightNote: on the saloon, the front cour-
tesy light (in the "permanently on"
position) forces the switching on of
the rear courtesy light if the switch is
in the central position.
To switch off the rear courtesy light,
place the switch in the "permanently
off" position.
In this position, the courtesy
light comes on automati-
cally:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location function is used. Permanently off.
Permanently on when the
ignition is on (function not
available in economy mode).
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds
after the last door is closed.
4. Rear reading lights (estate)
First press, permanently on, when
the ignition is on (function not avail-
able in economy mode).
Second press, the reading light
comes on:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when a door is opened,
- when the vehicle location function is used.
It switches off gradually:
- when the vehicle is locked,
- when the ignition is switched on,
- with the ignition off, 30 seconds after the last door is closed.

Page 90 of 202

Layout82 -
01-10-2005
83Layout-
01-10-2005

Page:   < prev 1-10 ... 41-50 51-60 61-70 71-80 81-90 91-100 101-110 111-120 121-130 ... 210 next >