Peugeot 307 Break Dag 2007 Owner's Guide

30
Presentation
This displays the following informa-tion:
- the time,- the date,- the outside temperature* (this flashes if there is a risk of ice),- the status of the accesses (doors, boot, ...),- the warning messages (e.g.: "Emis-sion control system faulty") or infor-mation messages (e.g.: "Auto lights on"), displayed temporarily, can be cleared by pressing the "ESC" but-ton,- the trip computer (see correspond-ing section).
MONOCHROME DISPLAY A
(without RD4 audio equipment)Parameter configuration
There are three display control but-tons:
- "ESC" to abandon the operation in progress,- "MENU" to scroll through the men-us or sub-menus,- "OK" to select the menu or sub-menu required.
General menu
Press the "MENU" button to scroll through the various menus of the general menu:
- vehicle configuration,- options,- display settings,- languages,- units.Press the "OK" button to select the menu required.
* With air conditioning only.

31
Vehicle configuration
Once the "Vehicle configuration" menu has been selected, you can activate or deactivate the following equipment:
- wiper linked with reverse gear (re-fer to the "Visibility" section),- "follow-me-home" lighting (refer to the "Visibility" section),- parking assistance (refer to the "Driving" section).
Options
Once the "Options" menu has been selected, you can start diagnostics of the status of the equipment (active, not active, faulty).
Languages
Once the "Languages" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Por-tugues, Portugues-Brasil, Deutsch, English, Espanol).
Display settings
Once the "Display settings" menu has been selected, you can gain ac-cess to the following settings:
- year,- month,- day,- hour,- minutes,- 12 or 24 hour mode.
Units
Once the "Units" menu has been se-lected, you can change the units of the following parameters:
- temperature (°C or °F),- fuel consumption (l/100, mpg or km/l).
Once you have selected a setting, press the "OK" button to change its value.
Wait for approximately ten seconds without any action to allow the changed data to be recorded or press the "ESC"button to cancel.
The display then returns to the nor-mal display.For safety reasons, configu-ration of the multifunction displays by the driver must take place when stationary.

32
MONOCHROME DISPLAY AGeneral menu
Press the "MENU" button to gain ac-cess to the general menu, then press the "" or "" buttons to scroll through the following items:
- radio-CD,- vehicle configuration,- options,- display settings,- languages,- units.Press the "OK" button to select the menu required.
Presentation
This displays the following informa-tion, via the RD4 audio equipment control keypad:
- the time,- the date,- the outside temperature* (this flashes if there is a risk of ice),- the audio source displays (radio, CD, ...),- the status of the accesses (doors, boot, ...),- the warning messages (e.g.: "Emis-sion control system faulty") or informa-tion messages (e.g.: "Auto lights on"), displayed temporarily, can be cleared by pressing the "ESC" button,- the trip computer (see correspond-ing section).
Radio-CD
With the RD4 audio equipment switched on, once the "Radio-CD" menu has been selected, you can activate or deactivate the functions linked with the use of the radio (RDS following, REG mode), the CD or the CD changer (introscan, random play, CD repeat).
For further details concerning the "Radio-CD" application, refer to the RD4 part of the "Audio and Telemat-ics" section.
Vehicle configuration
Once the "Vehicle configuration" menu has been selected, you can activate or deactivate the following equipment:
- rear wiper linked with reverse gear (refer to the "Visibility" section),- "follow-me-home" lighting (refer to the "Visibility" section),- parking assistance (refer to the "Driving" section).
Options
Once the "Options" menu has been selected, you can start diagnostics of the status of the equipment (active, not active, faulty).
* With air conditioning only.

33
Display settings
Once the "Display settings" menu has been selected, you can gain ac-cess to the following settings:
- year,- month,- day,- hour,- minutes,- 12 or 24 hour mode.
Languages
Once the "Languages" menu has been selected, you can change the language used by the display (Français, Italiano, Nederlands, Por-tugues, Portugues-Brasil, Deutsch, English, Espanol).
Units
Once the "Units" menu has been se-lected, you can change the units of the following parameters:
- temperature (°C or °F),- fuel consumption (l/100, mpg or km/l).
Once you have selected a setting, press the "" or "" buttons to change its value.
Press the "" or "" buttons to move to the previous or next setting respectively.
Press the "OK" button to record the change and return to the normal dis-play or press the "ESC" button to cancel.
For safety reasons, configu-ration of the multifunction displays by the driver must take place when stationary.

34
MONOCHROME DISPLAY C
(without RD4 audio equipment)
Parameter configuration
There are three buttons and a navi-gator to enable you to control the screen:
- "MENU" to display the general menu, - "MODE" to change the permanent application (trip computer, date, ...),- "ESC" to abandon the operation in progress,- Rotation of the navigator: move-ment on the display or changing of a setting,- Press on the navigator: confirma-tion of the selection.
Presentation
It displays the following information:
- the time,- the date,- the exterior temperature (this flash-es if there is a risk of ice),- the accesses check (doors, boot, ...),- the warning messages (e.g.: "De-pollution system faulty") or infor-mation messages (e.g.: "Automatic headlamp lighting activated"), dis-played temporarily, can be cleared by pressing the "ESC" button,- the trip computer (see correspond-ing section),
General menu
Press the "MENU" button to access the general menu:
- trip computer (see corresponding section),- personalisation-configuration.
Turn the navigator to select the menu required, then confirm by pressing the navigator.
"Personalisation-
Configuration" menu
Once this menu has been selected, you can access the following func-tions:
- define the vehicle parameters,- display configuration,- selection of the language.

35
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the fol-lowing equipment:
- wiper linked with reverse gear (re-fer to the "Visibility" section),- "follow-me-home" lighting and du-ration (refer to the "Visibility" sec-tion),- parking assistance (refer to the "Driving" section).
Selection of the language
Once this menu has been selected, you can change the language used on the display (Deutsch, English, Espanol, Français, Italiano, Neder-lands, Portugues, Portugues-Brasil).
Display configuration
Once this menu has been selected, you can access the following set-tings:
- brightness-video setting,- date and time setting,- selection of the units.
Once you have selected a setting, press the navigator.
Turn the navigator to change its value.
Press the navigator to record the change and move on to the next set-ting or press the "ESC" button to cancel.
Example: "Duration of the "follow-me-home" lighting"
For safety reasons, configu-ration of the multifunction displays by the driver must take place when stationary.

36
MONOCHROME SCREEN C
Controls
From the RD4 audio equipment con-trol panel, you can:
 press the "MENU" button to gain access to the general menu,
 press the "" or "" buttons to scroll through the items on the screen,
 press the "MODE" button to change the permanent application (trip computer, audio source, ...),
 press the "" or "" buttons to change a setting value,
 press the "OK" button to confirm,
or
 press the "ESC" button to aban-don the operation in progress.
Displays on the screen
This displays the following informa-tion:
- the time,- the date,- the outside temperature* (this flashes if there is a risk of ice),- the status of the accesses (doors, boot, ...),- the audio sources (radio, CD, ...),- the trip computer (refer to the cor-responding section).Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Automatic switch-ing on of the headlamps activated") may appear temporarily. These can be cleared by pressing the "ESC"button.
General menu
 Press the "MENU" button to gain access to the general menu:
- audio functions, - trip computer (refer to the corre-sponding section), - personalisation-configuration, - telephone (hands-free kit). Press the "" or "" buttons to select the menu required, then confirm by pressing the "OK"button.
* With air conditioning only.
"Audio functions" menu
With the RD4 audio equipment switched on, once this menu has been selected you can activate or de-activate the functions linked with use of the radio (RDS, REG, RadioText), the CD or the CD changer (introscan, shuffle, CD repeat).
For further details concerning the "Audio functions" application, refer to the RD4 part of the "Audio and Telematics" section.
"Trip computer" menu
Once this menu has been selected, you can consult information concern-ing the status of the vehicle (warn-ings log, status of the functions, ...).

37
"Personalisation-Configuration" menu
Once this menu has been selected, you can gain access to the following functions:
- define the vehicle parameters,- display configuration,- selection of the language.
Display configuration
Once this menu has been selected, you can gain access to the following settings:
- brightness-video setting,- date and time setting,- selection of the units.
Example: setting of the duration of the "follow-me-home" lighting
 Press the "" or "" buttons, then the "OK" button to select the menu required.
 Press the "" or "" buttons, then the "OK" button to select the "Lighting and signalling" line.
 Press the "" or "" buttons to set the value required (15, 30 or 60 seconds), then press the "OK"button to confirm.
For safety reasons, it is im-perative that configuration of the multifunction displays by the driver takes place when stationary.
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the fol-lowing equipment:
- wiper linked with reverse gear (re-fer to the "Visibility" section),- "follow-me-home" lighting (refer to the "Visibility" section),- parking assistance (refer to the "Driving" section).
 Press the "" or "" buttons, then the "OK" button to select the "OK" box and confirm or press the "ESC" button to cancel.
Selection of the language
Once this menu has been selected, you can change the language used by the display (Deutsch, English, Espanol, Français, Italiano, Neder-lands, Portugues, Portugues-Brasil).
"Telephone" menu
With the RD4 audio equipment switched on, once this menu has been selected you can configure your Bluetooth hands-free kit (match-ing), consult the various telephone directories (calls log, services, ...) and manage your communications (pick up, hang up, call waiting, secret mode, ...).
For further details concerning the "Telephone" application, refer to the RD4 part of the "Audio and Telemat-ics" section.

38
COLOUR SCREEN
Displays on the screen
When the ignition is switched on, this displays the following information automatically and directly:
- the time,- the date,- the outside temperature (if there is a risk of ice, you are warned by a message).Warning messages (e.g.: "Fuel lev-el low") and vehicle function status messages (e.g.: "Automatic switch-ing on of the headlamps activated") may appear temporarily. These can be cleared by pressing the "ESC"button.
General menu
When the RT4 GPS audio/telephone is switched on, select the menu which corresponds to the following applications:
- the satellite navigation system,- the guidance on the map,- the traffic information,- the audio sources (radio, CD, Juke-box, ...),- the telephone directories and func-tions,- the configuration of the screen and the setting of the parameters of the vehicle’s equipment,- the displaying of a video.- the vehicle diagnostics (warnings log and status of the functions).
Controls
From the RT4 GPS audio/telephone control panel, to select one of the ap-plications:
 press the "MENU" button to gain access to the general menu,
 turn the dial to move the selec-tion,
 press the dial to confirm the selec-tion,
or
 press the "ESC" button to aban-don the operation in progress and return to the previous display.
For further details concerning these applications, refer to the RT4 part of the "Audio and Telematics" section.

39
Selection of the language
Once the "Selection of the language" menu has been selected, you gain access to the following parameters:
- selection of the display, information and voice commands language (Français, English, Italiano, Por-tugues, Espanol, Deutsch, Neder-lands).
Display configuration
Once the "Display configuration" menu has been selected, you gain access to the following parameters:
- selection of the palette of colours available for the display,- setting of the brightness and bril-liance of the display,- setting of the date and time (12 or 24 hour mode, adjustment of the minutes on GPS), - selection of the units (temperature in °Celsius or °Fahrenheit; consump-tion in l/100 km or mpg or km/l).
Sounds
Once the "Sounds" menu has been selected, you gain access to the fol-lowing parameters:
- setting of the voice commands,- setting of the voice synthesiser (volume of the instructions and oth-er messages, male or female),- activation of the auxiliary input AUX.
Define the vehicle parameters
Once the "Define the vehicle param-eters" menu has been selected, you can activate or deactivate certain driving and comfort equipment:
- parking assistance (refer to the "Driving" section),- wiper linked with reverse gear (refer to the "Visibility" section),- "follow-me-home" lighting and duration (refer to the "Visibility" section).
"Configuration" menu
 Press the "MENU" button on the RT4 GPS audio/telephone to gain access to the general menu.
 Turn the dial to select the "Con-figuration" menu, then press it to confirm.
Once this menu has been selected, you can gain access to the following functions: