Peugeot 307 CC 2004.5 Owner's Guide

28
30-08-2004
29
30-08-2004
YOUR 307 CC IN DETAIL
CT monochrome screen
The "Display Coni guration" menu
gives access to the following para-
meters:
• "Adjust the brightness": display brightness setting,
• "Sound": voice synthesiser setting (for the masculine/feminine voice
parameter: insert the coni guration
CD-Rom); setting of the spoken
commands,
• "International parameters": date and time setting (12 or 24 hour
mode, adjustment of the minutes
on GPS); units setting (l/100 - °C or
mpg
- °F),
• Choice of language": selection of the language for the display, infor-
mation and voice commands (Ger-
man, English, Spanish, French,
Italian, Dutch, Portuguese: insert
the coni guration CD ROM).
DT colour screen
The "Coni guration" menu gives
access to the following parameters:
• "Choose colours": selection from the palette of colours available for
display,
• "Luminosity and brightness": dis- play brightness setting,
• "Sound": voice synthesiser setting (for the masculine/feminine voice
parameter: insert the coni guration
CD-Rom); setting of the spoken
commands,
• "International parameters": date and time setting (12 or 24 hour
mode, adjustment of the minutes
on GPS); units setting (l/100 - °C or
mpg - °F),
• "Choice of language": selection of the language for the display, infor-
mation and voice commands (Ger-
man, English, Spanish, French,
Italian, Dutch, Portuguese: insert
the coni guration CD ROM).
Video
It is possible to connect video equip-
ment (a camcorder, digital camera,
...) using the three video sockets
situated inside the glove box.
It is only possible to display video
images when the vehicle is sta-
tionary.
Select the "Video" menu from the main menu :
- "Activate video mode" to activate/
cancel the video function,
- "Video parameters" to adjust the display format, the brightness, con-
trast and colour.
Press
"MODE" or "DARK" to exit
video mode.
Successive presses on the
"SOURCE"
button allow you to select another au-
dio source other than the video.
For safety reasons, con-
i guration of the multi-
function screens by the
driver must be carried out
when stationary.

30
30-08-2004
31
30-08-2004
YOUR 307 CC IN DETAIL
AUDIO RD3
Stalk movement Function
1
- Press (behind) Increase volume
2 - Press (behind) Decrease volume
1 + 2 - Simultaneous press Sound cut-off (mute); restoring of the sound b y pressing any button
3 - PressAutomatic search of higher frequencies (radio) -
Selection of the next track (CD)
4 - PressAutomatic search of lower frequencies (radio) -
Selection of the previous track (CD)
5 - Press the end Change of source (radio/CD/CD changer)
6 - Rotation
(clockwise) Selection of next station stored in memory (radio) -
Selection of following CD
7 - Rotation
(anti-clockwise) Selection of previous station stored in memory (radio) -
Selection of previous CD

30
30-08-2004
31
30-08-2004
YOUR 307 CC IN DETAIL
ButtonFunction
A Radio on/off
B -
Reduction in volume
C +Increase in volume
D5Ejection of CD
E RDSRDS function on/off
Press for more than 2 seconds: regional following mode on/off
F TATrafic information priority on/off
Press for more than 2 seconds: PTY function on/off
G¯Adjustment of bass, treble, loudness, sound distribution and a utomatic volume correction
H5Increase of the functions associated with button G
I
6Decrease of the functions associated with button G
J
8Manual and automatic search of higher frequency
Selection of next CD track and of the PTY (radio)
K MANManual/automatic operation of buttons J and L
L
7Manual and automatic search of lower frequency
Selection of previous CD track and of the PTY (radio)
M CH. CDSelection of CD changer
Press for more than 2 seconds: shufle
N CDSelection of the CD source
Press for more than 2 seconds: shufle
O RadioSelection of the radio source. Selection of wavebands FM1, FM2, FMAST, AM
Press for more than 2 seconds: automatic storing of stations (autosto re)
1 to 6 1 2 3 4 5 6Selection of station stored in memory
Press for more than 2 seconds: storing of a station in memory
1 to 5 1 2 3 4 5Selection of the CDs in the CD changer

32
30-08-2004
33
30-08-2004
YOUR 307 CC IN DETAIL
GENERAL FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically empha-
sises bass and treble tones.
Press button
H or I to switch the func-
tion on or off.
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.
The set can oper-
ate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
vehicle. It would not function if itted
to another vehicle.
The anti-theft system is automatic
and requires no action on your part.
ADJUSTING THE VOLUME
Press the button C to increase the
volume, or button B to decrease it.
Continuous pressure on buttons
B and C allows a gradual adjustment
of the volume.
Adjusting the bass
Adjusting the treble
When "TREB" is displayed, press
button H or I to vary the setting.
-
"TREB -9" for a minimum treble
setting,
-
"TREB 0" for a normal setting,
- "TREB +9" for a maximum treble
setting.
Press button
G sev-
eral times in succes-
sion to access the
bass (
BASS), treble
(TREB), loudness
(LOUD), fader (FAD) ,
balance (BAL) and
automatic volume cor-
rection settings.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button
G after coniguration of the automatic
volume correction.
Note: bass, treble and loudness set-
tings are speciic to each source. It
is possible to set them differently for
radio, CD or CD changer. When
"BASS" is dis-
played, press button H
or I to vary the setting.
-
"BASS -9" for a mini-
mum bass setting,
-
"BASS 0" for a nor-
mal setting,
-
"BASS +9" for a maxi-
mum bass setting.

32
30-08-2004
33
30-08-2004
YOUR 307 CC IN DETAILRADIO
Notes on radio reception
Your car radio is subject to phenom-
ena which do not affect domestic
radio sets. Both AM (MW/LW) and
FM reception are subject to various
forms of interference. This is no re-
lection on the quality of the equip-
ment, but is due to the nature of the
signals and the way in which they are
transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the re-
sult of increasing distance from the
transmitter, delection of the signals
by obstacles (mountains, hills, build-
ings etc.), or of being in an area which
is not covered by a transmitter.
Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When "FAD" is displayed, press but-
ton H or I.
Button
H increases the volume at
the front.
Button
I increases the volume at the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press but-
ton H or I.
Button
H increases the volume on
the right-hand side.
Button
I increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons
H or I to switch the
function on or off. Press button
O.
Press button
O briely
to select wavebands
FM1, FM2, FMast and
AM.

32
30-08-2004
33
30-08-2004
YOUR 307 CC IN DETAILRADIO
Notes on radio reception
Your car radio is subject to phenom-
ena which do not affect domestic
radio sets. Both AM (MW/LW) and
FM reception are subject to various
forms of interference. This is no re-
lection on the quality of the equip-
ment, but is due to the nature of the
signals and the way in which they are
transmitted.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the re-
sult of increasing distance from the
transmitter, delection of the signals
by obstacles (mountains, hills, build-
ings etc.), or of being in an area which
is not covered by a transmitter.
Selecting radio mode
Selecting a waveband
Adjusting the front/rear sound
distribution (Fader)
When "FAD" is displayed, press but-
ton H or I.
Button
H increases the volume at
the front.
Button
I increases the volume at the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press but-
ton H or I.
Button
H increases the volume on
the right-hand side.
Button
I increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons
H or I to switch the
function on or off. Press button
O.
Press button
O briely
to select wavebands
FM1, FM2, FMast and
AM.

34
30-08-2004
35
30-08-2004
YOUR 307 CC IN DETAIL
Manual station search
Press the "MAN" button.
Briely press button
J or L to in-
crease or decrease the frequency
displayed.
By continuing to press the button
in the direction selected, you will
obtain continuous scrolling of the
frequency.
The scrolling stops at the irst sta-
tion found as soon as the button is
released.
Pressing the
"MAN" button again re-
turns you to automatic station search.
Automatic storing of FM stations
in the memory (autostore)
Your radio automatically stores the
six stations with the strongest signal
in
FM. These stations are stored in
the FMast waveband.
If it is not possible to ind 6 stations,
the remaining memories are empty.
Automatic station search
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons
"1" to "6"
for more than two seconds.
The sound stops then becomes audi-
ble again, conirming that the station
has been stored in the memory. Press button
O down
for more than two
seconds.
Recalling stations stored in the
memory
For each waveband, briely press
one of the buttons "1" to "6" to recall
the corresponding station.
Briely press button
J or L to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
The scrolling stops at the irst sta-
tion found as soon as the button is
released.
If the
TA trafic program is selected,
only stations broadcasting this type
of program are selected.
Searching for a station occurs irst in
"LO" sensitivity (selection of the most
powerful transmitters) during scan-
ning of the waveband, then in
"DX"
sensitivity (selection of the weakest
and most distant transmitters).
To make a direct search in
"DX" sen-
sitivity, press button J or L twice.

34
30-08-2004
35
30-08-2004
YOUR 307 CC IN DETAIL
RDS
Using the RDS
(Radio Data System) function on FM
Radio Data System allows you to
continue listening to the same station
whatever frequency it is using for the
region you are going through.
Trafic information program Regional following mode (REG)
When they are part of a network,
certain stations broadcast regional
programs in the various areas they
serve. With regional following mode
you can keep listening to the same
program.
Press the
"RDS" button for more
than two seconds to switch the func-
tion on or off.
RDS station following
The display indicates the name of
the station selected. When the RDS
function is active, the radio continual-
ly searches for the transmitter which
transmits the station selected with
the best reception. Press the
"TA" button
to switch the function
on or off.
The multifunction dis-
play will show:
-
"TA" if the function is selected,
- "(TA)" if the function is selected but
not available.
Any trafic information lash will be
given priority, whatever source you
are listening to (radio, CD or CD
changer).
If you wish to interrupt a message,
press the
"TA" button; this switches
the function off.
Note: the volume of trafic informa-
tion announcements is independ-
ent of the volume of normal radio
listening. You can adjust it using
the volume button. The setting will
be stored and will be used when the
next messages are broadcast.
Briely press the "RDS"
button to switch the
function on or off.
The multifunction dis-
play will show:
-
"RDS" if the function is selected,
- "(RDS)" if the function is selected
but not available.

36
30-08-2004
37
30-08-2004
YOUR 307 CC IN DETAIL
EON system
This connects stations which are part
of the same network. It enables the
broadcasting of trafic information or
a
PTY program by a station that is
part of the same network as the sta-
tion to which you are listening.
This service is available when you
have selected the
TA trafic informa-
tion program or the PTY function.
PTY function
This allows you to listen to stations
broadcasting a speciic type of pro-
gram (news, culture, sport, rock etc.). To search for a
PTY program:
With
FM selected,
press the "TA" but-
ton for more than two
seconds to switch this
function on or off. - select the PTY function,
- briely press button J or L to scroll
down the list of the various types of
programs offered.
- when the program of your choice is displayed, keep button
J or L
pressed for more than two seconds
to carry out an automatic search
(after an automatic search the
PTY
function is switched off).
In
PTY mode the different types of
programs can be stored in memory.
To do this, press the preselection
buttons
"1" to "6" for more than two
seconds. Briely press the corre-
sponding button to recall the type of
program stored in the memory.

36
30-08-2004
37
30-08-2004
YOUR 307 CC IN DETAIL
Ejection of a discSelecting a track Shufle (RDM)
When the CD player is selected,
keep button N pressed for two sec-
onds. The tracks will be played in
random sequence. Pressing the
button again for two seconds returns
you to normal play.
Shufle mode is de-activated each time
the audio equipment is switched off.
COMPACT DISC
Selecting CD mode
Press button J to select the next
track.
Press button
L to return to the start
of the current track or to select the
previous track.
The use of copied com-
pact discs may cause
malfunctions.
Insert circular compact discs
only.
In the cabriolet position, remem-
ber to remove the compact discs
from your player (risk of theft).

Press button D to
eject the disc from the
player.
Accelerated play
Keep button J or L pressed for for-
wards or backwards accelerated play.
Accelerated play stops as soon as
the button is released.
After insertion of a disc,
printed face upwards,
the player starts auto-
matically.
If a disc is already in-
serted, press button
N.