Peugeot 307 CC 2005 Owner's Guide

Instruments and controls28 -
01-03-2005
Access via the general menu
Screen C
Screen CT
Screen DT"On-board computer" menu
Press the
"MENU" button to access
the general menu.
Select the icon ''On-board computer'' ,
then validate to access its menu.
Depending on the multifunction
display, this menu offers various
choices:
- Enter distance to destination,
- Warning log,
- Status of the functions.
or
- On-board computer coniguration,
- Diagnostics,
- Status of the functions.
Enter distance to destination
If guidance has not been activated,
this enables you to enter an approxi-
mate distance to inal destination
value, to permit all of the on-board
computer calculations.
Warning log
This summarises the active warning
messages, displaying them in suc-
cession on the multifunction display. Status of the functions
This summarises the active or not
active status of the functions present
on the vehicle.
On-board computer coniguration
This function allows the distance to
the destination to be input (when
guidance is not activated; otherwise
this information is given by the navi-
gation system) and also changing of
the units of measurement (°C or °F,
km and litres or miles and gallons).
Diagnostics
This presents the information relating
to the warning log, as regards the
energy remaining in the back-up
battery and the number of satellites
which can be seen by the GPS
system.

29Multifunction displays-
01-03-2005
MONOCHROME SCREEN C
General menu
Press the «MENU» button to gain
access to the general menu:
- audio functions,
- trip computer (see corresponding section),
- personalisation-coniguration.
Press the « 5» or « 6» buttons
to select the menu required, then
conirm by pressing the «OK»
button.
Presentation
This displays the following informa-
tion, via the RD4 audio equipment
control keypad:
- the time,
- the date,
- the outside temperature (this lashes if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: «Depollution system faulty»)
or information messages (e.g.:
«Automatic headlamp lighting
activated»), displayed temporarily,
can be cleared by pressing the
«ESC» button,
- the trip computer (see correspon- ding section).
«Audio functions» menu
With the RD4 audio equipment
switched on, once this menu has
been selected, you can activate
or deactivate the functions linked
with the use of the radio (RDS,
REG, RadioText), the CD or the CD
changer (introscan, random play, CD
repeat).
«Personalisation-
Coniguration» menu
Once this menu has been selected,
you can gain access to the following
functions:
- deine the vehicle parameters,
- display coniguration,
- selection of the language.

Multifunction displays30 -
01-03-2005
31Multifunction displays-
01-03-2005
Deine the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the
folllowing equipment:
- automatic switching on of the lights,
- «follow-me-home lighting» and duration,
- parking assistance. Selection of the language
Once this menu has been selected,
you can change the language
used by the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
Display coniguration
Once this menu has been selected,
you can gain access to the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
When you have selected a setting,
press the
«OK» button, then press
the « 7» or « 8» buttons to change
its value.
Press the «OK» button to record
the change and move on to the next
setting or press the «ESC» button to
cancel.Example: «duration of follow-me-
home lighting»
For safety reasons, coni-
guration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays30 -
01-03-2005
31Multifunction displays-
01-03-2005
MONOCHROME SCREEN CT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control keypad:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (telephone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: «Fuel level low») and vehicle function
status messages (e.g.: «Automatic
headlamp lighting activated»)
displayed temporarily,
- the trip computer display,
- the satellite navigation system displays. In order to enable you to use all of
your system’s functions, you have
two CD-Roms:
- one, «Coniguration», contains
the software and the various
display languages and spoken
information,
- the other, «Navigation», contains the satellite navigation system map
data.
General menu
Press the «MENU» button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- coniguration.
For further details regarding these
functions, refer to the corresponding
section.

Multifunction displays32 -
01-03-2005
33Multifunction displays-
01-03-2005
Display coniguration
The «Display coniguration» menu
provides access to the following
parameters:
• «Brightness setting»: setting of the brightness of the display,
• «Sound»: setting of the voice synthesiser (for the male/female
voice parameter: insert the
coniguration CD-Rom); setting of
the voice commands,
• «International parameters»: setting of the date and time (12 or 24 hour
mode, adjustment of the minutes
on GPS); selection of the units (l/
100 - °C or mpg - °F),
• «Selection of the language»: selection of the language of the
display, information and voice
commands (Français, English,
Italiano, Portugues, Espanol,
Deutsch, Nederlands: insert the
coniguration CD-rom ).
For safety reasons, coni-
guration of the multifunction
displays by the driver must
take place when stationary.«Coniguration» menu
This provides access to successive
conirmation windows.
Deine the vehicle parameters
This enables you to activate or
deactivate certain driving and
comfort functions:
- automatic switching on of the lights,
- «follow-me-home» lighting and duration,
- parking assistance. Example: «duration of follow-me-
home lighting»

Multifunction displays32 -
01-03-2005
33Multifunction displays-
01-03-2005
COLOUR SCREEN DT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control panel:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (telephone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: «Fuel level low») and vehicle function
status messages (e.g.: «Automatic
headlamp lighting activated»)
displayed temporarily,
- the trip computer display,
- the satellite navigation system displays. In order to enable you to use all of
your system’s functions, you have
two CD-Roms:
- one, «Coniguration», contains
the software and the various
display languages and spoken
information,
- the other, «Navigation», contains the satellite navigation system map
data.
General menu
Press the «MENU» button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- coniguration,
- map,
- video.
For further details regarding these
functions, refer to the corresponding
section.

Multifunction displays34 -
01-03-2005
35Multifunction displays-
01-03-2005
Display coniguration
The «Display coniguration» menu
provides access to the following
parameters:
• «Select the colours»: selection from the palette of colours available
for the display,
• «Brightness and intensity»: setting of the brightness and intensity of
the display,
• «Sound»: setting of the voice synthesiser (for the male/female
voice parameter: insert the
coniguration CD-Rom); setting of
the voice commands,
• «International parameters»: setting of the date and time (12 or 24 hour
mode, adjustment of the minutes
on GPS); selection of the units (l/
100 - °C or mpg - °F),
• «Selection of the language»: selection of the language of the
display, information and voice
commands (Français, English,
Italiano, Portugues, Espanol,
Deutsch, Nederlands: insert the
coniguration CD-rom ).«Coniguration» menu
This provides access to successive
conirmation windows.
Deine the vehicle parameters
This enables you to activate or
deactivate certain driving and
comfort functions:
- automatic switching on of the lights,
- «follow-me-home» lighting and duration,
- parking assistance. Example: «Automatic switching on of
the lights»

Multifunction displays34 -
01-03-2005
35Multifunction displays-
01-03-2005
A FEW DEFINITIONS...
Superimposed display
This is a window which appears tem-
porarily over the current application
to announce a change of status of
another application.
Permanent application
This is the main application currently
in use, displayed as the main screen
window.
Contextual menu
This is a menu, limited to the main
functions of the main application
currently in use, displayed as the
main screen window.
«Video» menu
You can connect video equipment
(camcorder, digital camera, DVD
player, ...) to the three audio/video
sockets, located in the glove box.
Videos can only be displayed
when stationary.Select the
«Video» menu from the
general menu :
- «Activate video mode» to activate/ deactivate the video,
- «Video parameters» to set the display format, the brightness, the
contrast and the colours.
Pressing the «MODE» or «DARK»
button disconnects the display from
the video.
Successive presses on the
«SOURCE» button permit the
selection of an audio source other
than that of the video.
For safety reasons, coni-
guration of the multifunction
displays by the driver must
take place when stationary.

36 -
01-03-2005
37
-
01-03-2005
Audio equipment and telematics
The RD4 is a radio, power 4x15W,
with a single CD player on the front
panel.
It is itted with:
- a special socket for connection of
the CD changer,
- two analogue inputs which can be activated by the PEUGEOT
network (Aux 1 and Aux 2) for
MP3 players, hands-free kits or
navigation systems (accessories),
- 6 speakers (2 tweeters, 2 woofers and two broad band),
- a Radio / CD / CD changer / Trip Computer control panel,
- a tuner with 18 FM memories (3 wavebands) and 6 AM memo-
ries,
- a processor for digital processing of the sound , "DSP" (Digital Sound
Processor).
Note: if your vehicle is itted with the
JBL audio system, one analogue
input is already activated by default.
THE CONTROL PANEL AND
FUNCTIONS LINKED WITH
THE RD4
Anti-theft system
The audio equipment is coded in
such a way that it can only work in
your vehicle. If you wish to install
it in another vehicle, contact your
PEUGEOT dealer for coniguration
of the system.
The anti-theft system is automatic.
No action on your part is required.
Radio
With RDS / REG / EON / TA / PTY
functions.
Radio Text compatible.
CD player
CD Text  and MP3* compatible.
If the TA (Trafic Announcement)
function is active, interruption by
Trafic Information is possible.
5 disc CD changer
With random play and playing of the
beginning of tracks functions.
If the TA (Trafic Announcement)
function is active, interruption by
Trafic Information is possible.
* According to version

36 -
01-03-2005
37
-
01-03-2005
Audio equipment and telematics
Control pad
Button (A)
ON / OFF and volume adjustment. Keypad (2)
SOURCE: switching of the source
between the radio, CD, CD changer,
Aux 1 and Aux 2 (if conigured).
BAND AST: selection of the frequen-
cy wavebands FM1, FM2, FMast
(Autostore function) and AM. ¯
: access to the musical ambience,
automatic volume adjustment, left/
right sound distribution, rear/front
sound distribution, loudness, treble
and bass settings.
LIST REFRESH: displaying and up-
dating of the list of stations received,
of the tracks on the CD.
Button (B)
CD eject.
Keypad (1)
MODE: changing of the display of
the permanent application (audio
equipment, trip computer, ...).
DARK: 1
st press: black screen under
the banner - 2nd press: completely
black screen - 3rd press: return to the
display. Keypad (3) (numeric block)
Storing of the radio station.
Selection of the stored station, of the
CD in relation to the position in the
CD changer.
Keypad (4)
ESC (Escape): cancellation of the
operation in progress.
MENU: displaying of the general
menu.
Keypad (5)
The navigator.
Button (C)
TA: function on/off (trafic information
priority).
PTY: access to the function (search
by type of programme, if the coding
is activated by the broadcasting
stations).