Peugeot 307 CC 2005 Manual Online

Audio equipment and telematics74 -
01-03-2005
75Audio equipment and telematics-
01-03-2005
Management of the directory
This function enables you to rename
an address stored in the directory.
Select the description corresponding
to the stored address to be
changed.
Select the “Rename” function, then
conirm by pressing the navigator.
Select the “OK” function, then
conirm by pressing the navigator to
record the changes made.
Stopping / Resuming guidance
- “Stop guidance”
Ÿ During guidance, select this
function then validate.
- “Resume guidance” Ÿ In the absence of guidance,
select this function then validate
to activate guidance to the last
destination programmed.
Note: after re-starting the engine,
a screen appears enabling you
to resume the guidance activated
before the ignition was switched off. “Navigation - Guidance”
contextual menu
TMC (Trafic Message Channel)
RDS Trafic Information
The RT3 GPS audio/telephone
permits access to the TMC RDS
trafic information, broadcast free on
the FM waveband.
This function enables you to receive
messages regarding the trafic
conditions (accidents, trafic jams,
weather, ...).
They may appear temporarily as a
superimposed display or be read by
the voice synthesiser, if it is active.
The contextual menu associated
with the “Navigation - Guidance”
application appears as a
superimposed display, when this is
the application currently in use in the
main screen window.
This menu is limited to the following
functions:
- changing of the initial route,
- switching to “Selection - Movement on map” mode*,
- storing of the current location (postal address if available or, if it is
not, the GPS co-ordinates),
- changing of the route calculation criteria,
- stopping or resuming of guidance (displaying of the message which
changes depending on the previous
status),
- displaying of the map, full screen or reduced size on the right
(displaying of the message which
varies depending on the previous
status)*.
* DT colour screen only.

Audio equipment and telematics76 -
01-03-2005
77Audio equipment and telematics-
01-03-2005
You can read the messages
transmitted by the TMC station, while
listening to another station*.
In map mode**, special TMC symbols
are displayed depending on the type
of information.
Select the “TMC Trafic Information”
function on the “Telematics” menu,
you can choose:
- “Consult the messages” to display the list of TMC messages
available,
- “Filter the TMC information” to select one or more types of
message and initialise the TMC
station,
- “Voice synthesiser” to listen to the TMC messages received,
- “Activate/Deactivate trafic information” to display or not display
the TMC messages received.
Initialising the TMC station
To initialise this function, you must
select an FM station which can
transmit these messages.
Select the “Choice of the TMC
station” function from the “Trafic
Information TMC” menu, one of
the following will then appear on the
screen:
- the name of the station that you are currently listening to,
- “No TMC station available” if no station has been selected or if the
station selected does not transmit
TMC messages,
- “Searching” if you have activated the search for the next station. Filtering the TMC messages General notes on the “Map”
application*
The “Map” application has three
display modes:
- one “Vehicle following on
map” mode, representing active
guidance on the map on the right
and a large-scale view of the next
intersection on the left,
- two “Selection - Movement
on map” modes, representing
consultation of the map at full
screen size or reduced size on the
right with a compass on the left.
To switch from one mode to the
other, press the navigator briely,
then select the “Move the map” or
“Exit the map mode” function.
You can see symbols, representing
the various types of services which
exist, sorted by category:
- “Administration and safety” symbol on a grey background,
- “Hotels, bars and restaurants” symbol on a yellow background,
- “Other businesses” symbol on a purple background,
- “Culture, tourism and entertainment” symbol on a white background,
- “Sports centres and open air centres” symbol on a green
background,
- “Transportation and automobiles” symbol on a blue background.
To ilter these messages, select
the
“Filter the TMC information”
function from the “Trafic
Information TMC” menu, you then
obtain:
- “Route information ilter” to obtain the messages relating to the
current guidance outline,
- “Filter by event” to display the messages speciic only to
accidents, or trafic jams, ...,
- “Geographic ilter” to take into account the messages within a
radius of action to be deined
around the vehicle and/or a
location.
You can ilter these messages using
one or more ilters simultaneously.
* Only with DT colour screen.

Audio equipment and telematics76 -
01-03-2005
77Audio equipment and telematics-
01-03-2005
“Vehicle following on map” mode
This mode permits:
- displaying of the vehicle on the map with the route proposed by the
navigation if the guidance is active,
- zooming in on the map in accordance with the thirteen preset
levels,
- displaying of the “Navigation -
Guidance” contextual menu. Map
From the
general menu , the main
“Map” menu offers various options
for guidance management:
- switching to “Selection - Movement on map” mode,
- direction of the map towards the North or in the direction of the
vehicle,
- recentering of the map around the vehicle,
- opening of the services selection window visible on the map, such as
hotels, service stations, etc.
- displaying of the window for entering the description for
recording the current position of
the vehicle in a directory ile.
A
“Zoom” function enables you to
enlarge the map, in accordance with
the thirteen preset levels relating to
the following scales:
- 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
- 1 km/cm, 2 km/cm, 5 km/cm,
- 10 km/cm, 20 km/cm, 50 km/cm,
- 100 km/cm, 200 km/cm.
This is achieved by turning the
navigator.

Audio equipment and telematics78 -
01-03-2005
79Audio equipment and telematics-
01-03-2005
“Selection-Movement on map”
modes
These modes permit:
- selection of any point on the map to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS coordinates),
- movement on the map by means of the four directional arrows,
representing the four cardinal
points (North, East, South, West),
- zooming in on the map in accordance with the thirteen preset
levels,
- displaying of the «Map» contextual
menu. “Map” contextual menu
The contextual menu associated with
the
“Map” application and with the
“Selection - Movement on map”
mode appears as a superimposed
display, when these are in use in the
main screen window.
This menu is limited to the following
functions:
- displaying of the information on the location selected on the map,
- selection of a location on the map as a destination,
- storing of the location selected (postal address if available or, if it is
not, GPS co-ordinates, so that they
can be recorded in a directory ile),
- switching to “Vehicle following on map” mode.

Comfort80 -
01-03-2005
81Comfort-
01-03-2005

Comfort80 -
01-03-2005
81Comfort-
01-03-2005
VENTILATION
1. Windscreen de-icing or
demisting vents.
2. Front window de-icing or
demisting vents.
3. Side vents.
4. Centre vents.
5. Air outlet to front footwells.
6. Air outlet to rear footwells.
Advice on operation
F If, when the vehicle has been
parked in the sun for a long time,
the interior temperature remains
very high, do not hesitate to ven-
tilate the passenger compartment
for a few minutes.
Place the air low control at a level suficient to ensure a good
renewal of air in the passenger
compartment.
When the air low control is in position 0 (deactivation of the
system), temperature related
comfort is no longer guaranteed
but a slight low of air, due to the
movement of the vehicle, can still
be felt.
F For perfectly even air distribution,
take care not to obstruct the
exterior air intake grilles, the vents
and the air ducts under the front
seats, as well as the air extractor
located in the boot.
Check that the passenger com- partment ilter is in good condi-
tion.

Comfort82 -
01-03-2005
83Comfort-
01-03-2005
DUAL ZONE AUTOMATIC AIR
CONDITIONING
The air conditioning only operates
with the engine running.
Automatic operation
1. Passenger side setting
2. Driver's side settingFor optimum comfort, you are ad-
vised to avoid a left / right setting
difference of more than 3.
For maximum cooling or heating of
the passenger compartment, it is
possible to go below the value 15
by turning until
"LO" is displayed or
above the value 27 by turning until
"HI" is displayed.
Press the "AUTO" button.
The "AUTO" symbol is
displayed.
We recommend the use
of this mode: it permits
automatic and optimised adjustment
of all of the functions, passenger
compartment temperature, air low,
air distribution and air recirculation,
in line with the value that you have
selected. This system is designed to operate
effectively in all seasons, with the
windows closed.
4. Automatic visibility programme
The automatic comfort pro-
gramme may prove inad-
equate to quickly demist or
de-ice the windscreen and
side windows (because of
humidity, numerous passengers, ice,
etc.).
In these cases, select the automatic
visibility programme. The button 4
indicator light comes on.
The system automatically controls
the air conditioning, the air low and
the air intake and provides optimum
distribution of the ventilation to the
windscreen and side windows.
To switch it off, press button 4 again
or press the "AUTO" button, the
button's indicator light switches off
and "AUTO" is displayed.
The driver and his front
passenger can each adjust
the temperature to their
requirements.
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit.
Turn control 1 or 2 to the left or to
the right respectively to decrease or
increase this value (from 15 to 27;
comfort value = 21). 3. Automatic comfort
programme In the cabriolet position, the
effectiveness of the system
may be reduced.
When the engine is cold, to prevent
too great a distribution of cold air,
the ventilation will reach its optimum
level gradually.
On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value, there is no
need to change the value displayed in
order to obtain the comfort required.
The system corrects the difference
in temperature automatically and as
quickly as possible.

Comfort82 -
01-03-2005
83Comfort-
01-03-2005
Manual operation
If you wish, you can make a different
choice from the one offered by the
system, by changing a setting. The
other functions will still be managed
automatically.
Press the "AUTO" button to return to
completely automatic operation.
Press this button to stop the
air cooling.
Press again to return to
automatic operation of the
air conditioning. The " A/C"
symbol is displayed.
6. Air distribution adjustment
Successive presses of this
button allow the air low to
be directed alternately to:
- the windscreen and the side windows (demisting or de-icing),
- the windscreen, the side windows and the footwells,
- the footwells,
- the central vents, the side vents and the footwells,
- the central and side vents. 7. Air low adjustment
Press the
"small fan" or "large fan"
button respectively to decrease or
increase the air low.
The air low symbol, the fan, ills
progressively in relation to the value
required.
8. Air intake / Air recirculation 9. De-icing the rear window and
the mirrors
Press the "small fan" button of
the air low 7 until the fan symbol
disappears.
This action switches off all of the
functions of the air conditioning
system, with the exception of the
demisting of the rear screen 9.
Temperature-related comfort is no
longer guaranteed but a slight low
of air, due to the movement of the
vehicle, can still be felt.
Pressing the "large fan" button of
the air low 7, button 4 or the AUTO
button again reactivates the system
with the values set before it was
switched off.
Press this button to recir-
culate the interior air. The
air recirculation symbol
8 is
displayed.
Air recirculation prevents the entry of
unpleasant odours and fumes
from
the outside.
Avoid prolonged recirculation of the
interior air (risk of condensation and
deterioration of the air quality).
As soon as possible, press this button
again to permit the intake of outside
air and prevent condensation.
5. Air conditioning On / Off
Press this button to de-ice
the rear screen and the ex-
terior mirrors. The button
9
indicator light comes on.
The de-icing system switches off
automatically to prevent an excessive
consumption of current.
It is possible to stop the de-icing
before it switches off automatically
by pressing the button again.
Note: this function is disarmed when
the roof is stored in the boot.
10. Switching the system off

Comfort84 -
01-03-2005
85Comfort-
01-03-2005
MIRRORS
Electric exterior mirrors
Adjustment
F Slide switch A to the right or to the
left to select the corresponding
mirror.
F Move knob B in all four directions
to adjust.
F Return switch A to the centre
position. Folding
- from inside:
F
with the ignition on, pull switch A
rearwards.
- from outside:
F lock the vehicle using the remote
control or the key.
Note: if the mirrors are folded using
switch A, they will not unfold when
the vehicle is unlocked using the
remote control or the key. Switch A
must be pulled again.
Unfolding
- from inside:
F with the ignition on, pull switch A
rearwards.
- from outside:
F unlock the vehicle using the
remote control or the key.
The folding and unfol-
ding of the exterior mirrors
can be deactivated by a
PEUGEOT dealer.
Operate the air conditioning
system for 5 to 10 minutes,
once or twice a month, to
keep it in perfect working
order.
In order to ensure that the air con-
ditioning system operates correctly,
regular checks are also recom-
mended.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
It is quite normal that the condensa-
tion created by the air conditioning
results in a low of water under the
vehicle when it is stationary.

Comfort84 -
01-03-2005
85Comfort-
01-03-2005
MIRRORS
Electric exterior mirrors
Adjustment
F Slide switch A to the right or to the
left to select the corresponding
mirror.
F Move knob B in all four directions
to adjust.
F Return switch A to the centre
position. Folding
- from inside:
F
with the ignition on, pull switch A
rearwards.
- from outside:
F lock the vehicle using the remote
control or the key.
Note: if the mirrors are folded using
switch A, they will not unfold when
the vehicle is unlocked using the
remote control or the key. Switch A
must be pulled again.
Unfolding
- from inside:
F with the ignition on, pull switch A
rearwards.
- from outside:
F unlock the vehicle using the
remote control or the key.
The folding and unfol-
ding of the exterior mirrors
can be deactivated by a
PEUGEOT dealer.
Operate the air conditioning
system for 5 to 10 minutes,
once or twice a month, to
keep it in perfect working
order.
In order to ensure that the air con-
ditioning system operates correctly,
regular checks are also recom-
mended.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
It is quite normal that the condensa-
tion created by the air conditioning
results in a low of water under the
vehicle when it is stationary.