Peugeot 307 CC 2006 Owner's Manual

10
104
In the engine compartment, on the right-hand side, remove the style trim*:
- press the centre of each plastic stud A,- remove each plastic stud,- remove the style trim.
When you have finished, do not for-get to put everything back in place correctly:
- position the style trim*,- refit each plastic stud A by pressing on it.* According to engine.
1. Dipped beam headlamps (H1-55W or xenon bulb).
WARNING: RISK OF ELECTROCU-TION
Xenon bulbs must be changed by a PEUGEOT dealer.
2. Main beam headlamps (H7-55W).
 Remove the protective cover cor-responding to the faulty bulb.
 Disconnect the connector.
 Press the end of each securing clip. Change the bulb.
When fitting the new bulb, ensure that the direction notches are posi-tioned correctly and the securing clips are fixed properly.
Handle the bulbs with a dry cloth.
The headlamps are fitted with polycarbonate glass with a protective coating. Do not clean them with a dry or abrasive cloth, nor with a detergent or sol-vent product.
Use a sponge and soapy water.
 Reconnect the connector.
 Refit the protective cover.
CHANGING A BULB
Front lights

10
105
 Push the repeater forwards and release it.
 Remove the repeater and change it.
These can be obtained from a PEUGEOT dealer.
Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specification and colour.
3. Side lights (W 5 W).
 Remove the protective cover cor-responding to the faulty bulb.
 Disconnect the connector.
 Remove the bulb and change it.
4. Direction indicators (PY 21 W amber).
 Turn the bulb holder a quarter of a turn and remove it.
 Change the bulb.
Note: in certain climatic conditions (low temperature, humidity), con-densation inside the headlamp glass is normal; it disappears a few minutes after the lights are switched on.
Contact a PEUGEOT dealer to have these bulbs changed.
5. Fog lamps (H11-55 W).
Integrated direction indicator side repeaters.

10
106
 Unclip the corresponding boot lid trim at two points.
 Move the trim aside gently to access the bulb holder 6.
 Unscrew the bulb holder a quarter of a turn.
 Remove the bulb holder.
 Change the faulty bulb.
Note: when refitting, take care to position the bulb holder correctly.
1. Brake lights (diodes).
2. Side lights (diodes).
3. Direction indicators (P 21 W).
4. Reversing light (P 21 W), left side.
Fog lamp (P 21 W), right side.
 Remove the 3 bolts of the corre-sponding boot side trim to access the light (use the 20 TorxTMsponding boot side trim to access sponding boot side trim to access adap-tor of tool C located in the hand-book pocket).
 Remove the light fixing nut inside the boot.
 Remove the light.
 Unscrew the bulb holder 5 a quar-ter of a turn.
 Remove the bulb holder.
 Change the faulty bulb.
Note: when refitting, take care to position the bulb holder and the light correctly.All work on the diode lights must be carried out by a PEUGEOT dealer.
Rear lightsDirection indicatorsReversing light/fog lamp

10
107
All work on the diode lights must be carried out by a PEUGEOT dealer.
 Insert a thin screwdriver into one of the external holes of the lens.
 Push it outwards to unclip it.
 Remove the lens.
 Change the faulty bulb.
Third brake light (diodes)Number plate lights (W 5 W)

10
108
CHANGING A FUSE
The fuse boxes are placed in the glove box (passenger side) and in the engine compartment (left-hand side).
CorrectIncorrect
Open the glove box lid to gain access to the fuses.
Replacing a fuse
Before replacing a fuse, the cause of the incident must be found and recti-fied. The fuse numbers are indicated on the fuse box.
Always replace a faulty fuse with a fuse of the same rating (same col-our).
Use the special pliers located on the inside of the fascia fuse box cover, this support also contains the replacement fuses.
Fascia fuses
Fuse N°RatingFunctions
F3620 AHi-Fi amplifier.
F4030 ARetractable roof pump supply.

10
110
Engine compartment fuses
To access the fuses located in the engine compartment (next to the bat-tery), unclip the fuse box lid.
When you have finished, close the lid carefully to guarantee the sealing of the fuse box.
Fuse N°RatingFunctions
F120 AFan assembly relay control, engine control unit control.
F215 AHorn.
F310 AFront wash-wipe.
F420 AHeadlamp wash.
F515 AFuel pump and purge canister solenoid valve (2 litre petrol).
F610 AFour speed automatic gearbox control unit, automatic gearbox lever locking control, push control switch, fan assembly high speed relay, right and left xenon bulb headlamps.
F710 AABS/ESP control unit, power steering control unit.

10
111
Fuse N°RatingFunctions
F820 AStarter control.
F910 AAdditional heating unit (Diesel), engine coolant level switch.
F1030 AEngine management actuators (ignition coil, solenoid valves, oxyg en sensors, control units, injectors, heaters), purge canister solenoid valve (1.6 litre petrol).
F1140 AAir conditioning blower.
F1230 AWindscreen wipers low/high speed.
F1340 ABuilt-in systems interface supply (ignition positive).
F1430 AAir pump (2 litre petrol).
F1510 ARight main beam headlamp.
F1610 ALeft main beam headlamp.
F1715 ALeft dipped headlamp.
F1815 ARight dipped headlamp.

10
112
The electrical system of your vehicle is designed to operate with standard or optional equipment.
Before installing other electrical equipment or accessories on you r vehicle, contact a PEUGEOT dealer.
PEUGEOT will not accept responsibility for the cost incurred in rep airing your vehicle or for rectifying the malfunctions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instructions, in particular where the equipme nt in question consumes more than 10 milliamperes.
Fuse N°RatingFunctions
MF1*30 A200 W fan unit.
50 A400 W and 460 W fan unit.
MF2*30 AABS/ESP pump.
MF3*30 AABS/ESP solenoid valves.
MF4*80 ABuilt-in systems interface supply.
MF5*80 ABuilt-in systems interface supply.
MF6*80 APassenger compartment fuse box.
MF8*70 APower steering electro-pump unit.
* The maxi-fuses provide additional protection for the electrica l systems. All work must be carried out by a PEUGEOT dealer.

10
108
CHANGING A FUSE
The fuse boxes are placed in the glove box (passenger side) and in the engine compartment (left-hand side).
CorrectIncorrect
Open the glove box lid to gain access to the fuses.
Replacing a fuse
Before replacing a fuse, the cause of the incident must be found and recti-fied. The fuse numbers are indicated on the fuse box.
Always replace a faulty fuse with a fuse of the same rating (same col-our).
Use the special pliers located on the inside of the fascia fuse box cover, this support also contains the replacement fuses.
Fascia fuses
Fuse N°RatingFunctions
F3620 AHi-Fi amplifier.
F4030 ARetractable roof pump supply.

10
109
Fuse N°RatingFunctions
F1-Not used.
F230 ALocking and deadlocking.
F35 AAir bags and pre-tensioners unit.
F410 ABrake and clutch pedal switches, engine coolant level switch, steering wheel angle sensor, diagnostic socket, ESP sensor, particle emission filter pump, electrochro matic mirror.
F530 AFront electric windows and heated mirrors supply.
F630 ARear electric windows supply, hinged flaps motor.
F75 AFront and rear courtesy lights, map reading lights, glove box light.
F820 AMultifunction display supply, audio equipment, audio/telephone, alarm siren, alarm control unit, trailer fuse box, steering wheel controls supply.
F930 A12V front socket, 12V rear socket.
F1015 AAutomatic gearbox control unit, brake switch, tyre under-inflation d etection control unit.
F1115 ADiagnostic socket, particle emission filter control unit, low current ignition switch.
F1215 ARear parking assistance, Hi-Fi amplifier.
F135 AEngine fuse box supply, rain and brightness sensor.
F1415 ATrailer fuse box, instrument panel, automatic air conditioning, air bags, pre-tensioners and rear protective pop-up roll-over hoops unit, hands-free kit.
F1530 ALocking and deadlocking supply.
F16-PARC shunt.
F1740 AHeated rear screen.