Peugeot 307 CC 2006 Owner's Guide

29
MONOCHROME DISPLAY C
(without RD4 audio equipment)
Presentation
Three buttons and a navigator ena-ble you to control the display:
- "MENU" to display the general menu, - "MODE" to change the permanent application (trip computer, date, ...),- "ESC" to abandon the operation in progress,- Rotation of the navigator: move-ment on the display or changing of a setting,- Press on the navigator: confirma-tion of the selection.
It displays the following information:
- the time,- the date,- the exterior temperature (the value displayed flashes if there is a risk of ice),- the accesses check (doors, boot, ...),- the warning messages (e.g.: "Depollution system faulty") or infor-mation messages (e.g.: "Automatic headlamp lighting activated"), dis-played temporarily, can be cleared by pressing the "ESC" button,- the trip computer (see correspond-ing section).
Press the "MENU" button to access the general menu:
- trip computer (see corresponding section),- personalisation-configuration.
Turn the navigator to select the menu required, then confirm by pressing the navigator.
Once this menu has been selected, you can access the following func-tions:
- define the vehicle parameters,- display configuration,- selection of the language.
Parameter configurationGeneral menu
"Personalisation-Configuration" menu

30
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the fol-lowing equipment:
- automatic switching on of the lights,- "follow-me-home" lighting and duration,- parking assistance.
Selection of the language
Once this menu has been selected, you can change the language used on the display (Deutsch, English, Espanol, Français, Italiano, Nederlands, Portugues, Portugues-Brasil).
Display configuration
Once this menu has been selected, you can access the following set-tings:
- brightness-video setting,- date and time setting,- selection of the units.
Once you have selected a setting, press the navigator.
Turn the navigator to change the value of the setting selected.
Press the navigator to record the change and move on to the next set-ting or press the "ESC" key to can-cel.
Example: "Duration of the follow-me-home lighting"
For safety reasons, configu-ration of the multifunction displays by the driver must take place when stationary.

31
MONOCHROME SCREEN C
Press the "MENU" button to gain access to the general menu:
- audio functions,- trip computer (see corresponding section),- personalisation-configuration,- telephone (hands-free kit).Press the "" or "" buttons to select the menu required, then con-firm by pressing the "OK" button.
Presentation
This displays the following informa-tion, via the RD4 audio equipment control keypad:
- the time,- the date,- the outside temperature (this flashes if there is a risk of ice),- the audio source displays (radio, CD, ...),- the status of the accesses (doors, boot, ...),- the warning messages (e.g.: "Depollution system faulty") or infor-mation messages (e.g.: "Automatic headlamp lighting activated"), dis-played temporarily, can be cleared by pressing the "ESC" button,- the trip computer (see correspond-ing section).
"Audio functions" menu
With the RD4 audio equipment switched on, once this menu has been selected, you can activate or deacti-vate the functions linked with the use of the radio (RDS, REG, RadioText), the CD or the CD changer (introscan, random play, CD repeat).
Once this menu has been selected, you can gain access to the following functions:
- define the vehicle parameters,- display configuration,- selection of the language.
General menu"Personalisation-Configuration" menu

32
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the fol-llowing equipment:
- automatic switching on of the lights,- "follow-me-home lighting" and duration,- parking assistance.
Selection of the language
Once this menu has been selected, you can change the language used by the display (Deutsch, English, Espanol, Français, Italiano, Nederlands, Portugues, Portugues-Brasil).
Display configuration
Once this menu has been selected, you can gain access to the following settings:
- brightness-video setting,- date and time setting,- selection of the units.
When you have selected a setting, press the "OK" button, then press the "" or "" buttons to change its value.
Press the "OK" button to record the change and move on to the next set-ting or press the "ESC" button to cancel.
Example: "duration of follow-me-home lighting"
For safety reasons, configu-ration of the multifunction displays by the driver must take place when stationary.

33
MONOCHROME SCREEN CT
Presentation
This displays the following informa-tion, via the RT3 audio/telephone control keypad:
- the time,- the date,- the outside temperature (if there is a risk of ice, you are warned by a message),- the audio source displays (radio, CD, ...),- the telematic system displays (tel-ephone, services, ...),- the status of the accesses (doors, boot, ...),- the warning messages (e.g.: "Fuel level low") and vehicle function status messages (e.g.: "Automatic headlamp lighting activated") dis-played temporarily,- the trip computer display,- the satellite navigation system dis-plays.
In order to enable you to use all of your system's functions, you have two CD-Roms:
- one, "Configuration", contains the software and the various display languages and spoken informa-tion,- the other, "Navigation", contains the satellite navigation system map data.Press the "MENU" button on the RT3 audio/telephone to access the general menu and select one of the following applications:
- navigation - guidance,- audio functions,- trip computer,- directory,- telematics,- configuration.For further details regarding these functions, refer to the corresponding section.
General menu

34
The "Display configuration" menu provides access to the following parameters:
• "Brightness setting": setting of the brightness of the display,• "Sound": setting of the voice syn-thesiser (for the male/female voice parameter: insert the configuration CD-Rom); setting of the voice com-mands,• "International parameters": set-ting of the date and time (12 or 24 hour mode, adjustment of the min-utes on GPS); selection of the units (l/100 - °C or mpg - °F),• "Selection of the language": selec-tion of the language of the dis-play, information and voice com-mands (Français, English, Italiano, Portugues, Espanol, Deutsch, Nederlands: insert the configura-tion CD-rom ).
For safety reasons, configu-ration of the multifunction displays by the driver must take place when stationary.
This provides access to successive confirmation windows.
Example: "duration of follow-me-home lighting"
Define the vehicle parameters
This enables you to activate or deac-tivate certain driving and comfort functions:
- automatic switching on of the lights,- "follow-me-home" lighting and duration,- parking assistance.
"Configuration" menuDisplay configuration

35
COLOUR SCREEN DT
Presentation
This displays the following informa-tion, via the RT3 audio/telephone control panel:
- the time,- the date,- the outside temperature (if there is a risk of ice, you are warned by a message),- the audio source displays (radio, CD, ...),- the telematic system displays (tel-ephone, services, ...),- the status of the accesses (doors, boot, ...),- the warning messages (e.g.: "Fuel level low") and vehicle function status messages (e.g.: "Automatic headlamp lighting activated") dis-played temporarily,- the trip computer display,- the satellite navigation system dis-plays.
In order to enable you to use all of your system's functions, you have two CD-Roms:
- one, "Configuration", contains the software and the various display languages and spoken informa-tion,- the other, "Navigation", contains the satellite navigation system map data.
Press the "MENU" button on the RT3 audio/telephone to access the general menu and select one of the following applications:
- navigation - guidance,- audio functions,- trip computer,- directory,- telematics,- configuration,- map,- video.For further details regarding these functions, refer to the corresponding section.
General menu

36
The "Display configuration" menu provides access to the following parameters:
• "Select the colours": selection from the palette of colours available for the display,• "Brightness and intensity": setting of the brightness and intensity of the display,• "Sound": setting of the voice syn-thesiser (for the male/female voice parameter: insert the configuration CD-Rom); setting of the voice com-mands,• "International parameters": setting of the date and time (12 or 24 hour mode, adjustment of the minutes on GPS); selection of the units (l/100 - °C or mpg - °F),• "Selection of the language": selec-tion of the language of the dis-play, information and voice com-mands (Français, English, Italiano, Portugues, Espanol, Deutsch, Nederlands: insert the configura-tion CD-rom ).
This provides access to successive confirmation windows.
Define the vehicle parameters
This enables you to activate or deac-tivate certain driving and comfort functions:
- automatic switching on of the lights,- "follow-me-home" lighting and duration,- parking assistance.
Example: "Automatic switching on of the lights""Configuration" menuDisplay configuration

37
A FEW DEFINITIONS...
Superimposed display
This is a window which appears tem-porarily over the current application to announce a change of status of another application.
Permanent application
This is the main application currently in use, displayed as the main screen window.
Contextual menu
This is a menu, limited to the main functions of the main application cur-rently in use, displayed as the main screen window.
You can connect video equipment (camcorder, digital camera, DVD player, ...) to the three audio/video sockets, located in the glove box.
Videos can only be displayed when stationary.
Select the "Video" menu from the general menu:
- "Activate video mode" to activate/deactivate the video,- "Video parameters" to set the dis-play format, the brightness, the contrast and the colours.Pressing the "MODE" or "DARK"button disconnects the display from the video.
Successive presses on the "SOURCE" button permit the selec-tion of an audio source other than that of the video.
For safety reasons, configu-ration of the multifunction displays by the driver must take place when stationary.
"Video" menu

38