Peugeot 307 CC 2007 Owner's Manual

163
QUESTIONSOLUTIONRESPONSE
The TRAFFIC INFO box is ticked. However, certain traffic jams along the route are not indicated in real time.
On starting, it is several minutes before the system begins to receive the traffic information.Wait until the traffic information is being received correctly (displaying of the traffic information symbols on the map).
In certain countries, only major routes (motorways, ...) are listed for the traffic information.
The time taken to calculate a route sometimes seems longer than usual.longer than usual.
This phenomenon is normal. The system is dependent on the traffic information available.
The performance of the system may slow down tempora rily if a CD is being copied onto the Jukebox at the same time as a route is being calculated.
Wait until the CD has been copied or stop the copying before starting the guidance function.
Does the emergency call function work without a SIM card?
No, European regulations impose the presence of a S IM card in order to make an emergency call.Insert a valid SIM card in the slot on the RT4 GPS audio/telephone.
My SIM card is not recognised.The RT4 accepts 3.3V SIM cards, the old 5V and 1.8V SIM cards are not recognised.Contact your telephone operator.
After changing a wheel, the system loses its location.
The RT4 GPS audio/telephone uses the wheel rotation information to improve the GPS locating function. If a wheel is changed or deflates suddenly, the system recalculates the location. For approximately ten minutes, this recalculation may affect the quality of the locating function.
Wait until the system has completed its recalculation.
The table below groups together the answers to the most frequently asked questions concerning the RT4 audio/telephone.
The location on the map is incorrect or inaccurate.The altitude is not displayed.
On starting, the initialisation of the GPS may take up to 3 minutes to receive more than 3 satellites correctly.Wait until the system has started up completely. Check that there is a GPS coverage of at least 3 satellites (long press on the MENU button, then select AUDIO/TELEPHONE DIAGNOSTICS, then GPS COVERAGE).
Depending on the geographical environment (tunnel, ...) or the weather, the conditions of reception of the GPS signal may vary.This phenomenon is normal. The system is dependent on the conditions of reception of the GPS signal.

150
AUDIO EQUIPMENT/HANDS-FREE KIT
CONTENTS
• 01 First steps pg. 151
• 02 General menu pg. 152
• 03 Audio pg. 153
• 04 Hands-free kit pg. 156
• 05 Control short-cuts pg. 157
• 06 Configuration pg. 158
• 07 Display flow charts pg. 159
• Frequently asked questions pg. 161
The INFOTEC internet site provides additional animated information on the RD4. It can be consulted at the following address: http://public.infotec.peugeot.comSimple registration permits access and free consultation of the handbook.
The RD4 audio equipment is coded in such a way that it will only operate in your vehicle. If it is to be installed in another vehicle, contact your PEUGEOT dealer for configuration of the system.
For safety reasons, the driver must carry out opera tions which require prolonged attention while the vehicle is stationary.When the engine is off, and in order to prevent discharging of the battery, the RD4 audio equipment may switch off after a few minutes.

151
11
22
10101111
131314141515
33445566778899
1212
01 FIRST STEPS
1 - On/Off and volume adjustment.
2 - CD eject.
3 - Selection of the screen display mode.
4 - Selection of the source: radio, CD and CD changer.
5 - Selection of the FM1, FM2, FMast and AM wavebands.
6 - Setting the audio options: front/rear balance, left/right balance, loudness, sound ambiences.
7 - Displaying of the list of local stations, of the tracks on t he CD or of the MP3 directories.
8 - Abandon current operation.
9 - TA (Traffic Announcement) function on/off. Long press: access to the PTY (TYpes of radio Programme) mode.
10 - Confirmation.
11 - Automatic search for a lower/higher frequency.Selection of previous/next CD or MP3 track.
12 - Selection of a lower/higher radio frequency.Selection of the previous/next CD.Selection of the previous/next MP3 directory.
13 - Displaying of the general menu.
14 - Buttons 1 to 6:Selection of a stored radio station.Selection of a CD in the CD changer.Long press: storing of a station.
15 - The DARK button changes the display on the screen to improve driving comfort at night. 1st press: lighting of the top banner only. 2nd press: black screen display. 3rd press: return to the standard display.

152
02 GENERAL MENU
AUDIO FUNCTIONS: radio, CD, options.
TRIP COMPUTER: distance entering, warnings, status of functions.
TELEPHONE: hands-free kit, matching, management of a communication.
PERSONALISATION-CONFIGURATION: vehicle parameters, display, languages.
> MONOCHROME DISPLAY C
> MONOCHROME DISPLAY A

153
11
22
33
44
22
44
33
11
03 AUDIO
RADIO
SELECTING A STATION
Press the SOURCE button several times in succession and select the radio.
Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM.
Briefly press one of the buttons to carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST REFRESH button to display the list of stations received locally (30 stations maximum).To update this list, press for more than two seconds.
Select ACTIVATE FREQUENCY FOLLOWING (RDS) then press OK. RDS appears on the display.
Select the FM WAVEBAND PREFERENCES function then press OK.
Select AUDIO FUNCTIONS then press OK.
Press the MENU button.
FM WAVEBAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)
The external environment (hills, buildings, tunnels, basement car parks…) may block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio equipment.
RDS
The RDS, if displayed, enables you to continue list ening to the same station by means of frequency following. Howev er, in certain conditions, this RDS station is not followed throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.

154
11
22
33
11
22
CD CHANGER
PLAYING A CD (NOT MP3 COMPATIBLE)
Insert the CDs in the changer one by one.
Press the SOURCE button several times in succession and select CD CHANGER.
Press one of the buttons on the numeric keypad to select the corresponding CD.
Press one of the buttons to select a track on the CD.Press and hold one of the buttons for fast forwards or backwards play.
Insert circular compact discs only. Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may cause faults which are no reflection on the quality of the original player.
Without pressing the EJECT button, insert a CD in t he player, play begins automatically.
To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD.
Press one of the buttons to select a track on the CD.Press the LIST REFRESH button to display the list of tracks on the CD.
CD
PLAYING A CD

155
11
22
Insert an MP3 compilation in the player.The audio equipment searches for all of the music tracks, which may take anything between a few seconds and several tens of seconds, before play begins.
On a single disc, the CD player can read up to 255 MP3 files spread over 8 directory levels. However, it is advisable to keep to a limit of two levels to reduce the access time before the CD is played.
CD
PLAYING AN MP3 COMPILATION*
MP3 CD
INFORMATION AND ADVICE
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 A udio Layer 3, is an audio compression standard which permits the recording of several tens of music files on a single disc.
The playing and displaying of an MP3 compilation ma y depend on the recording programme and/or the parameters used.
In order to be able to play a recorded CDR or CDRW, when recording select standards ISO 9660 level 1.2 or Joliet.If the disc is recorded in another format, it may not be played correctly.It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible for optimum sound quality.In the particular case of a multi-session CD, the Joliet standard is recommended.
The audio equipment will only play files with the ex tension ".mp3". No other type of file (.wma, .mp4...) can be played.
It is advisable to restrict file names to 20 characters without using special characters (e.g.: " " ? ; ù) to avoid any playing or displaying problems.
To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD.
Press one of the buttons to select a track on the CD.Press the LIST REFRESH button to display the list of directories of the MP3 compilation.
* According to specification.

156
11
22
33
11
22
5511
04 HANDS-FREE KIT
MATCHING A TELEPHONE
DISPLAY C
For safety reasons and because they require prolonged attention on the part of the driver, the operations for matching of the Bluetooth mobile telephone with the RD4 hands-free kit must b e carried out with the vehicle stationary and the ignition on.
Select the accessory which corresponds to the name of the vehicle, a superimposed configuration display appears on the multifunction display.
Activate the telephone’s Bluetooth function and carry out a search of the Bluetooth accessories present for the telephone.
Select the YES tab on the display using the buttons then confirm by pressing OK.
Enter the vehicle’s authentication code (=1234).Depending on the telephone, you may be asked to enter this code before the superimposed configuration display appears.
YES
YES
The services offered by the hands-free kit depend on the network, the SIM card and the compatibility of the Bluetooth equipment used.Consult your telephone’s manual and your operator t o find out which services are available to you. A list of mobile telephones which offer the best range of services is available from the networ k. Contact a PEUGEOT dealer.
RECEIVING A CALL
An incoming call is announced by a ring and a super imposed display on the multifunction display.
Select the YES tab on the display using the buttons and confirm by pressing OK.
Press the end of the steering wheel stalk to accept the call.
Press and hold the end of the steering wheel stalk to access your directory.
To dial a number, use the keypad on your telephone.
MAKING A CALL

157
RADIO: selection of the next stored station.CD CHANGER: selection of the next CD.Selection of the next item on a menu.
RADIO: selection of the previous stored station.CD CHANGER: selection of the previous CD.Selection of the previous item on a menu.
RADIO: automatic search for a higher frequency.CD/CD CHANGER/MP3: selection of the next track.CD/CD CHANGER: continuous press: fast forwards play.Selection of the previous item.
RADIO: automatic search for a lower frequency.CD/CD CHANGER/MP3: selection of the previous track.CD/CD CHANGER: continuous press: fast backwards play.Selection of the next item.
Volume increase.
Volume decrease.
05 CONTROL SHORT-CUTS
Mute: by pressing the volume increase and decrease buttons simultaneously.
The sound is restored by pressing one of the two volume buttons.
- Change of sound source.- Confirmation of a selection.- Pick up/Hang up the telephone.- Press for more than 2 seconds: access to the telephone menu.
STEERING WHEEL CONTROLS

158
55
66
77
88
11
22
33
44
06 CONFIGURATION
ADJUSTING THE DATE AND TIME
DISPLAY C
Press the MENU button.
Using the arrows, select the PERSONALISATION CONFIGURATION function.
Press to confirm the selection.
Using the arrows, select the DISPLAY CONFIGURATION function.
Press to confirm the selection.
Press to confirm the selection.
Using the arrows, select the ADJUST DATE AND TIME function.
Adjust the parameters one by one confirming by pressing the OK button. Next select the OK tab on the display then confirm.
DISPLAY CONFIGURATION
ADJUST DATE AND TIME
OK
PERSONALISATION CONFIGURATION