Peugeot 307 CC 2007 Owner's Guide

29
MONOCHROME SCREEN C
Controls
From the RD4 audio equipment con-trol panel, you can:
 press the "MENU" button to gain access to the general menu,
 press the "" or "" buttons to scroll through the items on the screen,
 press the "MODE" button to change the permanent application (trip computer, audio source, ...),
 press the "" or "" buttons to change a setting value,
 press the "OK" button to confirm,
or
 press the "ESC" button to aban-don the operation in progress.
Displays on the screen
This displays the following informa-tion:
- the time,- the date,- the outside temperature* (this flashes if there is a risk of ice),- the status of the accesses (doors, boot, ...),- the audio sources (radio, CD, ...),- the trip computer (refer to the cor-responding section).Warning messages (e.g.: "Emission control system faulty") or information messages (e.g.: "Automatic switch-ing on of the headlamps activated") may appear temporarily. These can be cleared by pressing the "ESC"button.
General menu
 Press the "MENU" button to gain access to the general menu:
- audio functions,- trip computer (refer to the corre-sponding section),- personalisation-configuration,- telephone (hands-free kit). Press the "" or "" buttons to select the menu required, then con-firm by pressing the "OK" button.
* With air conditioning only.
"Audio functions" menu
With the RD4 audio equipment switched on, once this menu has been selected you can activate or de-activate the functions linked with use of the radio (RDS, REG, RadioText), the CD or the CD changer (introscan, shuffle, CD repeat).
For further details concerning the "Audio functions" application, refer to the RD4 part of the "Audio and Telematics" section.
"Trip computer" menu
Once this menu has been selected, you can consult information concern-ing the status of the vehicle (warn-ings log, status of the functions, ...).

!
30
"Personalisation-Configuration" menu
Once this menu has been selected, you can gain access to the following functions:
- define the vehicle parameters,- display configuration,- selection of the language.
Display configuration
Once this menu has been selected, you can gain access to the following settings:
- brightness-video setting,- date and time setting,- selection of the units.
Example: setting of the duration of the "follow-me-home" lighting
 Press the "" or "" buttons, then the "OK" button to select the menu required.
 Press the "" or "" buttons, then the "OK" button to select the "Lighting and signalling" line.
 Press the "" or "" buttons to set the value required (15, 30 or 60 seconds), then press the "OK"button to confirm.
Define the vehicle parameters
Once this menu has been selected, you can activate or deactivate the fol-lowing equipment:
- "follow-me-home" lighting (refer to the "Visibility" section),- parking assistance (refer to the "Driving" section).
 Press the "" or "" buttons, then the "OK" button to select the "OK" box and confirm or press the "ESC" button to cancel.
Selection of the language
Once this menu has been selected, you can change the language used by the display (Deutsch, English, Espanol, Français, Italiano, Neder-lands, Portugues, Portugues-Brasil).
"Telephone" menu
With the RD4 audio equipment switched on, once this menu has been selected you can configure your Bluetooth hands-free kit (match-ing), consult the various telephone directories (calls log, services, ...) and manage your communications (pick up, hang up, call waiting, secret mode, ...).
For further details concerning the "Telephone" application, refer to the RD4 part of the "Audio and Tele-matics" section.

31
COLOUR SCREEN
Displays on the screen
When the ignition is switched on, this displays the following information au-tomatically and directly:
- the time,- the date,- the outside temperature (if there is a risk of ice, you are warned by a message).Warning messages (e.g.: "Fuel level low") and vehicle function status mes-sages (e.g.: "Automatic switching on of the headlamps activated") may appear temporarily. These can be cleared by pressing the "ESC" button.
General menu
When the RT4 GPS audio/telephone is switched on, select the menu which corresponds to the following applications:
- the satellite navigation system,- the guidance on the map,- the traffic information,- the audio sources (radio, CD, Juke-box, ...),- the telephone directories and func-tions,- the configuration of the screen and the setting of the parameters of the vehicle’s equipment,- the displaying of a video,- the vehicle diagnostics (warnings log and status of the functions).
Controls
From the RT4 GPS audio/telephone control panel, to select one of the ap-plications:
 press the "MENU" button to gain access to the general menu,
 turn the dial to move the selec-tion,
 press the dial to confirm the selec-tion,
or
 press the "ESC" button to aban-don the operation in progress and return to the previous display.
For further details concerning these applications, refer to the RT4 part of the "Audio and Telematics" section.

32
Selection of the language
Once the "Selection of the language" menu has been selected, you gain access to the following parameters:
- selection of the display, information and voice commands language (Français, English, Italiano, Por-tugues, Espanol, Deutsch, Neder-lands).
Display configuration
Once the "Display configuration" menu has been selected, you gain access to the following parameters:
- selection of the palette of colours available for the display,- setting of the brightness and bril-liance of the display,- setting of the date and time (12 or 24 hour mode, adjustment of the minutes on GPS),- selection of the units (temperature in °Celsius or °Fahrenheit; consump-tion in l/100 km or mpg or km/l).
Sounds
Once the "Sounds" menu has been selected, you gain access to the fol-lowing parameters:
- setting of the voice commands,- setting of the voice synthesiser (volume of the instructions and of the other messages, male or female),- activation of the auxiliary input AUX,
Define the vehicle parameters
Once the "Define the vehicle para-meters" menu has been selected, you can activate or deactivate certain driving and comfort equipment:
- parking assistance (refer to the "Driving" section),- "follow-me-home" lighting and dura-tion (refer to the "Visibility" section).
"Configuration" menu
 Press the "MENU" button on the RT4 GPS audio/telephone to gain access to the general menu.
 Turn the dial to select the "Con-figuration" menu, then press it to confirm.
Once this menu has been selected, you can gain access to the following functions:

i
!
33
"Video" menu
You can connect video equipment (camcorder, digital camera, DVD player, ...) to the three audio/video sockets, located in the glove box.
Videos can only be displayed when stationary.
Once this menu has been selected, you can select:
- "Activate video mode" to activate/deactivate the video,- "Video parameters" to set the dis-play format, the brightness, the contrast and the colours. Press the "MODE" or "DARK"button to disconnect the display-ing of the video.
 Press the "SOURCE" button sev-eral times in succession to select an audio source other than that of the video.
 Select the line "Duration of the "follow-me-home" lighting" then confirm.
Example: setting the duration of the "follow-me-home" lighting
 Turn the dial to select the "Light-ing configuration" menu, then press it to confirm.
 Select the duration then press the dial.
 Turn the dial to set the value re-quired (15, 30 or 60 seconds), then press the dial.
 Select the "OK" box, then con-firm.

34
1. Windscreen de-icing or demisting vents.
2. Front window de-icing or demisting vents.
3. Side vents.
4. Centre vents.
5. Air outlet to front footwells.
6. Air outlet to rear footwells.
Advice on operation
 If, when the vehicle has been parked in the sun for a long time, the interior temperature remains very high, do not hesitate to ventilate the passenger compartment for a few minutes.
Place the air flow control at a level sufficient to ensure a good renewal of air in the passenger compartment.
When the air flow control is in posi-tion 0 (deactivation of the system), temperature related comfort is no longer guaranteed but a slight flow of air, due to the movement of the vehicle, can still be felt.
 For even air distribution, take care not to obstruct the exterior air intake grille at the base of the windscreen, the vents, the air outlets under the front seats and the air extractor located behind the flaps in the boot.
Check that the passenger com-partment filter is in good condition. Have the filters replaced regularly. If you drive in a dusty environment, change them twice as often.VENTILATION

i
35
The air conditioning only operates with the engine running.
Automatic operation
1. Automatic comfort programme
When the engine is cold, to prevent too great a distribution of cold air, the air flow will reach its optimum level gradually.
The driver and his front passenger can each adjust the temperature to their requirements.The value indicated on the display corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit.Turn control 2 or 3 ororto the left or to the right respectively to decrease or increase this value.A setting around the value 21 provides optimum comfort. However, depending on your requirements, a setting between 18 and 24 is normal.
For optimum comfort, you are advised to avoid a left/right setting difference of more than 3.For maximum cooling or heating of the passenger compartment, it is possible to go below the value 15 by turning until "LO" is displayed or above the value 27 by turning until "HI" is displayed.
4. Automatic visibility programme
The automatic comfort programme may prove inadequate to quickly demist or de-ice the windscreen and side windows (because of humidity, numerous passengers, ice, etc.).In these cases, select the automatic visibility programme. The button 4 indicator light comes on.The system automatically controls the air conditioning, the air flow and the air intake and provides optimum distribution of the ventilation to the windscreen and side windows.To switch it off, press button 4 again or press the "AUTO" button, the button’s indicator light switches off and "AUTO" is displayed.
Press the "AUTO" button. The "AUTO" symbol is displayed.We recommend the use of this mode: it permits automatic and optimised adjustment of all of the functions, passenger compartment temperature, air flow, air distribution and air recirculation, in line with the value that you have selected. This system is designed to operate effectively in all seasons, with the windows closed.In the cabriolet position, the effective-ness of the system may be reduced.
2. Driver’s side setting
3. Passenger side setting
DUAL ZONE AUTOMATIC AIR CONDITIONING

36
Manual operation
If you wish, you can make a different choice from the one offered by the system, by changing a setting. The other functions will still be managed automatically.
Press the "AUTO" button to return to completely automatic operation.
Press this button to stop the air cooling.
Avoid prolonged use of this mode (risk of condensation, odour, humidity).
Press this button again as soon as possible to return to automatic operation of the air conditioning. The "A/C" symbol is displayed.
6. Air distribution adjustment
Successive presses of this button allow the air flow to be directed alternately to:
- the windscreen and the side windows (demisting or de-icing),- the windscreen, the side windows and the footwells,- the footwells,- the central vents, the side vents and the footwells,- the central and side vents.
7. Air flow adjustment
Press the "small fan" or "large fan"button respectively to decrease or increase the air flow.
The air flow symbol, the fan, fills progressively in relation to the value required.
8. Air intake/Air recirculation
9. De-icing the rear window and the mirrors
10. Switching the system off
Press the "small fan" button of the air flow 7 until the fan symbol disappears.
This action switches off all of the functions of the air conditioning system, with the exception of the demisting of the rear screen 9.
Temperature-related comfort is no longer guaranteed but a slight flow of air, due to the movement of the vehicle, can still be felt.
Pressing the "large fan" button of the air flow 7 again or the AUTO button again reactivates the system with the values set before it was switched off.
Press this button to recirculate the interior air. The air recirculation symbol 8 is displayed.
Air recirculation prevents the entry of unpleasant odours and fumesfrom the outside.
Avoid prolonged recirculation of the interior air (risk of condensation and deterioration of the air quality).
As soon as possible, press this button again to permit the intake of outside air and prevent condensation.
5. Air conditioning On/Off
Press this button to de-ice the rear screen and the exterior mirrors. The button 9 indicator light comes on.
The de-icing system switches off automatically to prevent an excessive consumption of current.
It is possible to stop the de-icing before it switches off automatically by pressing the button again.
Note: this function is disarmed when the roof is stored in the boot.

i
37

i
!
38
Electric exterior mirrors
Adjustment
 Slide switch A to the right or to the left to select the corresponding mirror.
 Move knob B in all four directions to adjust.
 Return switch A to the centre position.
Folding
- from inside: with the ignition on, pull switch Arearwards.
- from outside: lock the vehicle using the remote control or the key.
Unfolding
- from inside: with the ignition on, pull switch Arearwards.
- from outside: unlock the vehicle using the remote control or the key.
MIRRORS
Note: if the mirrors are folded using switch A, they will not unfold when the vehicle is unlocked using the remote control or the key. Switch Amust be pulled again.