PEUGEOT 307 CC DAG 2004 Manual PDF

68
30-08-2004
69
30-08-2004
YOUR 307 CC IN DETAIL
Filtering the TMC messages
To ilter these messages, select the
"Filter the TMC information" func-
tion from the "Trafic Information
TMC" menu, you then obtain:
- "Route information ilter" to obtain the messages relating to the cur-
rent guidance outline,
- "Filter by event" to display the mes- sages speciic only to accidents, or
trafic jams, or...,
- "Geographic ilter" to take into ac- count the messages within a radius
of action to be deined around the
vehicle and/or a location.
You can ilter these messages using
one or more ilters simultaneously.General notes on the "Map"
application**
The "Map" application has two dis-
play modes:
- "Vehicle following on map"
mode, representing active guid-
ance on the map on the right and
a large-scale view of the next inter-
section on the left,
- "Selection-Movement on map"
mode, representing consultation
of the map at full screen size or
reduced size on the right with a
compass on the left.
To switch from one mode to the other,
press the dial on the right briely, then
select the "Move the map" or "Exit
the map mode" function. In
"Selection-movement on map"
mode, you can see symbols, repre-
senting the various types of services
which exist, sorted by category:
- "Administration and safety" symbol on a grey background,
- "Hotels, bars and restaurants" sym- bol on a yellow background,
- "Other businesses" symbol on a purple background,
- "Culture, tourism and entertain- ment" symbol on a white back-
ground,
- "Sports centres and open air centres" symbol on a green back-
ground,
- "Transportation and automobiles" symbol on a blue background.
A "Zoom" function enables you to
enlarge the map, in accordance with
the thirteen preset levels relating to
the following scales:
- 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
- 1 km/cm, 2 km/cm, 5 km/cm,
- 10 km/cm, 20 km/cm, 50 km/cm,
- 100 km/cm, 200 km/cm.
This is achieved by turning the dial.
** Only with DT colour screen.

68
30-08-2004
69
30-08-2004
YOUR 307 CC IN DETAIL
Filtering the TMC messages
To ilter these messages, select the
"Filter the TMC information" func-
tion from the "Trafic Information
TMC" menu, you then obtain:
- "Route information ilter" to obtain the messages relating to the cur-
rent guidance outline,
- "Filter by event" to display the mes- sages speciic only to accidents, or
trafic jams, or...,
- "Geographic ilter" to take into ac- count the messages within a radius
of action to be deined around the
vehicle and/or a location.
You can ilter these messages using
one or more ilters simultaneously.General notes on the "Map"
application**
The "Map" application has two dis-
play modes:
- "Vehicle following on map"
mode, representing active guid-
ance on the map on the right and
a large-scale view of the next inter-
section on the left,
- "Selection-Movement on map"
mode, representing consultation
of the map at full screen size or
reduced size on the right with a
compass on the left.
To switch from one mode to the other,
press the dial on the right briely, then
select the "Move the map" or "Exit
the map mode" function. In
"Selection-movement on map"
mode, you can see symbols, repre-
senting the various types of services
which exist, sorted by category:
- "Administration and safety" symbol on a grey background,
- "Hotels, bars and restaurants" sym- bol on a yellow background,
- "Other businesses" symbol on a purple background,
- "Culture, tourism and entertain- ment" symbol on a white back-
ground,
- "Sports centres and open air centres" symbol on a green back-
ground,
- "Transportation and automobiles" symbol on a blue background.
A "Zoom" function enables you to
enlarge the map, in accordance with
the thirteen preset levels relating to
the following scales:
- 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
- 1 km/cm, 2 km/cm, 5 km/cm,
- 10 km/cm, 20 km/cm, 50 km/cm,
- 100 km/cm, 200 km/cm.
This is achieved by turning the dial.
** Only with DT colour screen.

68
30-08-2004
69
30-08-2004
YOUR 307 CC IN DETAIL
"Selection-Movement on map"
mode
This mode permits:
- selection of any point on the map to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS co-ordinates),
- movement on the map by means of the four directional arrows,
representing the four cardinal
points (North, East, South, West),
- zooming in on the map in accord- ance with the thirteen preset levels,
- displaying of the "Map" contextual
menu. Map
From the
general menu , the main
"Map" menu offers various options
for guidance management:
- switching to "Selection-Movement on map" mode,
- direction of the map towards the North or in the direction of the vehicle,
- recentering of the map around the vehicle,
- opening of the services selection window visible on the map, such as
hotels, service stations, etc.
- displaying of the window for enter- ing the description for recording the
current position of the vehicle in a
directory ile."Vehicle following on map" mode
This mode permits:
- displaying of the vehicle on the map with the route proposed by the
navigation if the guidance is active,
- zooming in on the map in accord- ance with the thirteen preset levels,
- displaying of the "Navigation -
Guidance" contextual menu.

70
30-08-2004
71
30-08-2004
"Map" contextual menu
The contextual menu associated
with the "Map" application and with
the "Selection-Movement on map"
mode appears as a superimposed
display, when these are in use in the
main screen window.
This menu is limited to the following
functions:
- displaying of the information on the location selected on the map,
- selection of a location on the map as a destination,
- storing of the location selected (postal address if available or, if it is
not, GPS co-ordinates, so that they
can be recorded in a directory ile),
- switching to "Vehicle following on map" mode.
YOUR 307 CC IN DETAIL

72
30-08-2004
73
30-08-2004
YOUR 307 CC IN DETAIL

72
30-08-2004
73
30-08-2004
YOUR 307 CC IN DETAIL
VENTILATION
1. Windscreen de-icing or
demisting vents.
2. Front window de-icing or
demisting vents.
3. Side vents.
4. Centre vents.
5. Air outlet to front footwells.
6. Air outlet to rear footwells.
Advice on operation
F Place the air flow control at a level
sufficient to ensure a good renewal
of air in the passenger compart-
ment.
The
''OFF'' position cuts off all the air
circulation in the passenger compart-
ment.
Note: only use the ''OFF'' position oc-
casionally (risk of condensation).
F For perfectly even air distribution,
take care not to obstruct the ex-
terior air intake grilles, the vents
and the air ducts under the front
seats, as well as the air extractor
located in the boot. Check that the
passenger compartment filter is in
good condition.

74
30-08-2004
75
30-08-2004
AUTOMATIC AIR CONDITIONING
Note: in the cabriolet version, the effectiveness of the system may be reduced.
Automatic operation
2. Automatic comfort
program
Press the AUTO button. The
system automatically regu-
lates the temperature level of
the passenger compartment
in line with the value that you have
selected. To obtain the correct ambi-
ance, it controls the temperature, the
air low, the distribution and intake of
air as well as the air conditioning. For your comfort, the settings are
retained between two start-ups of
your vehicle if the temperature in
the passenger compartment has not
changed signiicantly; otherwise, op-
eration resumes in automatic mode.
3.
Automatic visibility
program
In certain cases, the auto-
matic comfort program may
prove inadequate to demist
or de-ice the windows (be-
cause of humidity, numerous passen-
gers, ice, etc.). Select this program to
rapidly clear the windows.
To exit this program and return to the
automatic comfort program, press
the
AUTO button.
Manual operation
If you wish you can make a different
choice from the one offered by the
system, by changing a setting. The
other functions will still be managed
automatically. Press the
AUTO but-
ton to return to completely automatic
operation.
1.
Temperature setting
The value indicated on the
display corresponds to a
comfort level and not to a
temperature in degrees Cel-
sius or Fahrenheit.
Press the arrows
1 (up and down)
to change this value. A setting of ap-
proximately 21 allows a comfortable
setting to be obtained.
YOUR 307 CC IN DETAIL

74
30-08-2004
75
30-08-2004
4. Air conditioning
Press this button to stop
cooling of the air. The "ECO"
symbol lights up. Press
again to return to automatic
operation of the air conditioning. The
"
A/C" symbol is displayed.
Note
The condensation created by the air
conditioning causes a normal low of
water under the vehicle when sta-
tionary.
To prevent condensation on the inside
of the vehicle in cold or wet weather,
you are advised to avoid using the
"
ECO" mode.
5.
Air distribution
Successive presses of this
button allow the air low to be
directed alternately to:
-
the windscreen (demisting or de-icing),
- the windscreen and the footwells,
- the footwells,
- the central and side vents and the footwells,
- the central and side vents. 6.
Air low
The air low may be in-
creased or reduced by
pressing the buttons
+
or - respectively.
7.
Air intake
8. Disarming the system
The OFF button disarms all
of the system's functions.
Temperature-related comfort
is no longer guaranteed but
a minimal low of air is maintained to
avoid misting of the windows and to
renew the air.
Pressing the OFF, AUTO or "visibility"
button again reactivates the system with
the values set before it was disarmed.
Note: if you wish to cut off the low
of air completely, press the air intake
button
7.
9.
De-icing the rear window and
the mirrors
Press this button to de-ice
the rear screen and the mir-
rors. The de-icing system
switches off automatically. It
is possible to stop the de-icing before
it switches off automatically by press-
ing the button again.
Note: this function is disarmed when
the roof is stored in the boot.
Important precaution
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Press this button to recycle
the interior air. Recirculation,
shown on the display, pre-
vents the entry of unpleasant
odours and fumes
from the outside.
Avoid prolonged recirculation of the
interior air. To do this, press again
to return the system to automatic
processing of the air intake.
Note: To prevent condensation on
the inside of the vehicle in cold or wet
weather, you are advised to avoid us-
ing this mode.
YOUR 307 CC IN DETAIL

76
30-08-2004
77
30-08-2004
YOUR 307 CC IN DETAILFRONT SEATS
1- Forwards-backwards
adjustment
Lift the control and slide the seat for-
wards or backwards.
2-
Access to rear seats
Pull the handle to fold the seat back
and move the seat forwards. On
repositioning, the seat returns to its
initial position.
Note: you can also use control 3.
Then adjust the angle.
Warning: no person or object must
prevent the seat slide from return-
ing to its initial position; return to this
position is necessary for the seat to
lock in place.
3-
Seat back angle adjustment
Push the handle towards the rear.

76
30-08-2004
77
30-08-2004
YOUR 307 CC IN DETAIL
4- Driver's or passenger's seat
height adjustment
Pull the handle upwards or push it
downwards as many times as neces-
sary to obtain the required position.
To remove the head restraint:
- place it in the top position then lower it a few millimetres,
- lift the lug using a coin,
- keep the lug lifted and pull it.
To put it back in position, locate the
stems of the restraint in the holes,
taking care to keep them in line with
the seat back.
REAR HEAD RESTRAINTS
The rear head restraints are ixed and
cannot be adjusted. They incorporate
pop-up roll-over hoops which are trig-
gered if the vehicle rolls over, in both
the coupé and the cabriolet position,
to guarantee your protection.
Do not place any clothing
on the rear head restraints.
Use a special cover recom-
mended by your PEUGEOT
dealer.
Following an accident, have
the roll-over hoops checked by a
PEUGEOT dealer.
6-
Heated seats switch
With the engine running, press the
switch. The temperature is controlled
automatically.
Pressing the switch again stops op-
eration.
Note: the command for activation
of heating of the seat(s) remains
memorised for two minutes after the
ignition has been switched off.
The adjustment is correct when
the upper edge of the head re-
straint is level with the top of the
head.
Never drive with the head
restraints removed; they
must be in place and cor-
rectly adjusted.
5-
Head restraint height and
angle adjustment
To raise or lower the restraint, pull it
forwards, sliding it at the same time.
Active seat back (front seats)
This possesses a device to prevent
'whiplash'.
When there is an impact from the
rear, the action of the body on the
seat back forces the head restraint
forwards and upwards, preventing
the head being thrown backwards.