Peugeot 307 CC Dag 2005.5 Owner's Guide

29Multifunction displays-
01-10-2005
MONOCHROME DISPLAY C
(without RD4 audio equipment)
Parameter coniguration
Three buttons and a navigator enable
you to control the display:
- "MENU" to display the general
menu,
- "MODE" to change the permanent
application (trip computer, date, ...),
- "ESC" to abandon the operation in
progress,
- Rotation of the navigator: move-
ment on the display or changing of
a setting,
- Press on the navigator: conirma-
tion of the selection.
Presentation
It displays the following information:
- the time,
- the date,
- the exterior temperature (the value displayed lashes if there is a risk of
ice),
- the accesses check (doors, boot, ...),
- the warning messages (e.g.: "De- pollution system faulty") or infor-
mation messages (e.g.: "Automatic
headlamp lighting activated"), dis-
played temporarily, can be cleared
by pressing the "ESC" button,
- the trip computer (see correspon- ding section).
General menu
Press the "MENU" button to access
the general menu:
- trip computer (see corresponding section),
- personalisation-coniguration.
Turn the navigator to select the menu
required, then conirm by pressing
the navigator.
"Personalisation-
Coniguration" menu
Once this menu has been selected,
you can access the following func-
tions:
- deine the vehicle parameters,
- display coniguration,
- selection of the language.

Multifunction displays30 -
01-10-2005
31Multifunction displays-
01-10-2005
Deine the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the
following equipment:
- automatic switching on of the lights,
- "follow-me-home" lighting and duration,
- parking assistance. Selection of the language
Once this menu has been selected,
you can change the language
used on the display (Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-
Brasil).
Display coniguration
Once this menu has been selected,
you can access the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
Once you have selected a setting,
press the navigator.
Turn the navigator to change the
value of the setting selected.
Press the navigator to record the
change and move on to the next
setting or press the
"ESC" key to
cancel.Example: "Duration of the "follow-
me-home" lighting"
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays30 -
01-10-2005
31Multifunction displays-
01-10-2005
MONOCHROME SCREEN C
General menu
Press the "MENU" button to gain
access to the general menu:
- audio functions,
- trip computer (see corresponding section),
- personalisation-coniguration,
- telephone (hands-free kit).
Press the " 5" or " 6" buttons to se-
lect the menu required, then conirm
by pressing the "OK" button.
Presentation
This displays the following
information, via the RD4 audio
equipment control keypad:
- the time,
- the date,
- the outside temperature (this
lashes if there is a risk of ice),
- the audio source displays (radio, CD, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "De- pollution system faulty") or infor-
mation messages (e.g.: "Automatic
headlamp lighting activated"), dis-
played temporarily, can be cleared
by pressing the "ESC" button,
- the trip computer (see correspon- ding section).
"Audio functions" menu
With the RD4 audio equipment
switched on, once this menu has
been selected, you can activate or
deactivate the functions linked with
the use of the radio (RDS, REG, Ra-
dioText), the CD or the CD changer
(introscan, random play, CD repeat).
"Personalisation-
Coniguration" menu
Once this menu has been selected,
you can gain access to the following
functions:
- deine the vehicle parameters,
- display coniguration,
- selection of the language.

Multifunction displays32 -
01-10-2005
33Multifunction displays-
01-10-2005
Deine the vehicle parameters
Once this menu has been selected,
you can activate or deactivate the
folllowing equipment:
- automatic switching on of the lights,
- "follow-me-home lighting" and duration,
- parking assistance. Selection of the language
Once this menu has been selected,
you can change the language used
by the display (Deutsch, English,
Espanol, Français, Italiano, Neder-
lands, Portugues, Portugues-Brasil).
Display coniguration
Once this menu has been selected,
you can gain access to the following
settings:
- brightness-video setting,
- date and time setting,
- selection of the units.
When you have selected a setting,
press the
"OK" button, then press
the " 7" or " 8" buttons to change
its value.
Press the "OK" button to record the
change and move on to the next set-
ting or press the "ESC" button to
cancel.Example: "duration of follow-me-
home lighting"
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Multifunction displays32 -
01-10-2005
33Multifunction displays-
01-10-2005
MONOCHROME SCREEN CT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control keypad:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (tele- phone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Fuel level low") and vehicle function
status messages (e.g.: "Automatic
headlamp lighting activated") dis-
played temporarily,
- the trip computer display,
- the satellite navigation system dis- plays. In order to enable you to use all of
your system's functions, you have
two CD-Roms:
- one, "Coniguration", contains the
software and the various display
languages and spoken informa-
tion,
- the other, "Navigation", contains the satellite navigation system map
data.
General menu
Press the "MENU" button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- coniguration.
For further details regarding these
functions, refer to the corresponding
section.

Multifunction displays34 -
01-10-2005
35Multifunction displays-
01-10-2005
Display coniguration
The "Display coniguration" menu
provides access to the following pa-
rameters:
• "Brightness setting": setting of the brightness of the display,
• "Sound": setting of the voice syn- thesiser (for the male/female voice
parameter: insert the coniguration
CD-Rom); setting of the voice com-
mands,
• "International parameters": setting of the date and time (12 or 24 hour
mode, adjustment of the minutes
on GPS); selection of the units
(l/100 - °C or mpg - °F),
• "Selection of the language": selection of the language of the
display, information and voice
commands (Français, English,
Italiano, Portugues, Espanol,
Deutsch, Nederlands: insert the
coniguration CD-rom ).
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary."Coniguration" menu
This provides access to successive
conirmation windows. Example: "duration of follow-me-
home lighting"
Deine the vehicle parameters
This enables you to activate or de-
activate certain driving and comfort
functions:
- automatic switching on of the
lights,
- "follow-me-home" lighting and du- ration,
- parking assistance.

Multifunction displays34 -
01-10-2005
35Multifunction displays-
01-10-2005
COLOUR SCREEN DT
Presentation
This displays the following informa-
tion, via the RT3 audio/telephone
control panel:
- the time,
- the date,
- the outside temperature (if there is a risk of ice, you are warned by a
message),
- the audio source displays (radio, CD, ...),
- the telematic system displays (tele- phone, services, ...),
- the status of the accesses (doors, boot, ...),
- the warning messages (e.g.: "Fuel level low") and vehicle function
status messages (e.g.: "Automatic
headlamp lighting activated") dis-
played temporarily,
- the trip computer display,
- the satellite navigation system dis- plays. In order to enable you to use all of
your system's functions, you have
two CD-Roms:
- one, "Coniguration", contains the
software and the various display
languages and spoken informa-
tion,
- the other, "Navigation", contains the satellite navigation system map
data.
General menu
Press the "MENU" button on the
RT3 audio/telephone to access the
general menu and select one of the
following applications:
- navigation - guidance,
- audio functions,
- trip computer,
- directory,
- telematics,
- coniguration,
- map,
- video.
For further details regarding these
functions, refer to the corresponding
section.

Multifunction displays36 -
01-10-2005
37Multifunction displays-
01-10-2005
Display coniguration
The "Display coniguration" menu
provides access to the following
parameters:
• "Select the colours": selection from the palette of colours available for
the display,
• "Brightness and intensity": setting of the brightness and intensity of
the display,
• "Sound": setting of the voice syn- thesiser (for the male/female voice
parameter: insert the coniguration
CD-Rom); setting of the voice com-
mands,
• "International parameters": setting of the date and time (12 or 24 hour
mode, adjustment of the minutes
on GPS); selection of the units
(l/100 - °C or mpg - °F),
• "Selection of the language": selection of the language of the
display, information and voice
commands (Français, English,
Italiano, Portugues, Espanol,
Deutsch, Nederlands: insert the
coniguration CD-rom)."Coniguration" menu
This provides access to successive
conirmation windows.
Deine the vehicle parameters
This enables you to activate or de-
activate certain driving and comfort
functions:
- automatic switching on of the lights,
- "follow-me-home" lighting and du- ration,
- parking assistance. Example: "Automatic switching on of
the lights"

Multifunction displays36 -
01-10-2005
37Multifunction displays-
01-10-2005
A FEW DEFINITIONS...
Superimposed display
This is a window which appears tem-
porarily over the current application
to announce a change of status of
another application.
Permanent application
This is the main application currently
in use, displayed as the main screen
window.
Contextual menu
This is a menu, limited to the main
functions of the main application
currently in use, displayed as the
main screen window.
"Video" menu
You can connect video equipment
(camcorder, digital camera, DVD
player, ...) to the three audio/video
sockets, located in the glove box.
Videos can only be displayed
when stationary.Select the
"Video" menu from the
general menu :
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
contrast and the colours.
Pressing the "MODE" or "DARK"
button disconnects the display from
the video.
Successive presses on the
"SOURCE" button permit the selec-
tion of an audio source other than
that of the video.
For safety reasons, conig-
uration of the multifunction
displays by the driver must
take place when stationary.

Comfort38 -
01-10-2005
39Comfort-
01-10-2005