Peugeot 307 CC Dag 2005 Service Manual

Audio equipment and telematics38 -
01-03-2005
39Audio equipment and telematics-
01-03-2005
Navigator
Located on the RD4 audio equipment
control keypad, this enables you to
select and conirm the functions,
commands and parameters
displayed.
It incorporates:
- the up 5, down 6, left 7, right 8
arrows which enable you to move
the cursor on the screen,
- the central conirmation button.
All selections can be cancelled
prior to conirmation by pressing the
"ESC" button or automatically after a
few seconds without any action.
Details of each of the keypad controls
are indicated on the following pages.
Audio equipment steering wheel control
This allows you direct and easy
access to most of the audio functions
which are also available on the audio
equipment control panel.
Volume adjustment
1. Increase by pressing the back
2. Decrease by pressing the back
1+2. Cutting off / Restoring of the
sound Sound sources
5
. Change of sound source
Selection of stations / CD changer
CD by rotation
6. Higher stored station - next CD
7. Lower stored station - previous
CD
Search / Selection by pressing
3 . Higher radio frequency - CD /
CD changer: next
4. Lower radio frequency - CD /
CD changer: previous

Audio equipment and telematics38 -
01-03-2005
39Audio equipment and telematics-
01-03-2005
Navigator
Located on the RD4 audio equipment
control keypad, this enables you to
select and conirm the functions,
commands and parameters
displayed.
It incorporates:
- the up 5, down 6, left 7, right 8
arrows which enable you to move
the cursor on the screen,
- the central conirmation button.
All selections can be cancelled
prior to conirmation by pressing the
"ESC" button or automatically after a
few seconds without any action.
Details of each of the keypad controls
are indicated on the following pages.
Audio equipment steering wheel control
This allows you direct and easy
access to most of the audio functions
which are also available on the audio
equipment control panel.
Volume adjustment
1. Increase by pressing the back
2. Decrease by pressing the back
1+2. Cutting off / Restoring of the
sound Sound sources
5
. Change of sound source
Selection of stations / CD changer
CD by rotation
6. Higher stored station - next CD
7. Lower stored station - previous
CD
Search / Selection by pressing
3 . Higher radio frequency - CD /
CD changer: next
4. Lower radio frequency - CD /
CD changer: previous

Audio equipment and telematics38 -
01-03-2005
39Audio equipment and telematics-
01-03-2005
General functions
On/off
Press the button to
switch the set on or
off.
The RD4 audio
equipment can operate for
approximately 30 minutes without
the vehicle's ignition being switched
on, under normal conditions of use
and maintenance of the battery.
Adjusting the volume
Turn the button clockwise to increase
the audio equipment volume or
anticlockwise to decrease it.
Audio settings
Press the ¯ button
several times to
access the musical
ambience, automatic
volume correction,
left/right sound distribution, rear/front
sound distribution, loudness, treble
and bass setting windows.
Exit from audio mode is by pressing
the "ESC" button or is automatic after
a few seconds without pressing any
button.
The bass, treble, loudness and
musical ambience settings are
speciic to each source. It is possible
to set them differently for the AM
radio, FM radio, CD, CD changer or
auxiliary equipment. Musical ambience
This function permits the selection
of a musical ambience: "None",
"Classical", "Jazz-Blues", "Pop-
Rock", "Vocal" or "Techno".
Press the
7 and 8 navigator buttons
to select the ambience required.
Adjusting the bass
When "Bass" is displayed, press the 7 and 8 navigator buttons to vary
the setting.
- "-9" for a minimum bass setting,
- mid-way for a normal setting,
- "+9" for a maximum bass setting.
Adjusting the treble
When "Treble" is displayed, press
the 7 and 8 navigator buttons to
vary the setting.
- "-9" for a minimum treble setting,
- mid-way for a normal setting,
- "+9" for a maximum treble setting. Adjusting the loudness
The loudness automatically
emphasises bass and treble tones.
Press the
7 and 8 navigator buttons
to switch the function on or off.
Adjusting the front/rear sound
distribution
When "Rear - Front Balance" is
displayed, press the navigator
buttons.
Button 8 increases the volume at
the front.
Button 7 increases the volume at
the rear.
Adjusting the right/left sound
distribution
When "Left - Right Balance" is
displayed, press the navigator
buttons.
Button 8 increases the volume on
the right-hand side.
Button 7 increases the volume on
the left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press the 7 and 8 navigator
buttons to switch the function on or
off.

Audio equipment and telematics40 -
01-03-2005
41Audio equipment and telematics-
01-03-2005
Radio
Notes on radio reception
The quality of the audio reception is
subject to external phenomena, due
to the nature of the signals and the
way in which they are transmitted.
Both AM and FM reception
are subject to various forms of
interference. This is no relection on
the quality of the equipment.
On MW/LW, interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the
result of increasing distance from
the transmitter, delection of the
signals by obstacles (mountains,
hills, buildings, etc.), or of being in
an area which is not covered by a
transmitter.Selecting radio mode
Press the "SOURCE"
button several times
until the radio source
is obtained.
Selecting a waveband Press the "BAND
AST" button briely
to select wavebands
FM1, FM2, FMast and
AM.
The stored stations
for each waveband
are displayed. Automatic station search
Briely press button 8
or 7 to search for the
station immediately
above or below.
The search stops at
the irst station found.
Searching for a station occurs irst in
"LO" sensitivity (selection of the most
powerful transmitters), then in "DX"
sensitivity (selection of the weakest
and most distant transmitters).
Manual station search
Briely press button 5 or 6 to decrease
or increase the
frequency displayed.
By continuing to
press the button
in the direction selected, you will
obtain continuous scrolling of the
frequency.
The scrolling stops as soon as the
button is released.

Audio equipment and telematics40 -
01-03-2005
41Audio equipment and telematics-
01-03-2005
Manual storing of stations in the
memory
Select the station required.
Press one of the buttons "1" to "6" for
more than one second.
The sound stops then becomes
audible again, conirming that the
station has been stored in the
memory.
Automatic storing of FM stations
in the memory (autostore)For greater listening
pleasure, it is
preferable to activate
the RDS function.
Press the "BAND
AST" button for more
than one second.
Your radio automatically stores the 6
stations with the strongest signal in
FM. These stations are stored in the
FMast waveband.
If it is not possible to ind 6 stations,
the remaining memories are empty. Recalling stations stored in the
memory
For each waveband, briely press
one of the buttons "1" to "6" to select
the corresponding station.
A superimposed display listing the
stored stations appears, the station
selected being identiied.
Displaying the stations available
You can display
the list of stations
received locally by
pressing the "LIST
REFRESH" button.
This list can include
up to 30 stations.
To update this list during your
journey, press the "LIST REFRESH"
button for more than one second.
To search for an available station:
- press the "LIST REFRESH" button,
- when the list of available stations is displayed, press button 5 or 6
to select a station, then conirm the
selection using the "OK" button.
Note: stations which permit the
broadcasting of trafic information
are indicated by the display TA. Trafic information programme
(TA)
Press the "TA/PTY"
button to switch the
function on or off.
The multifunction display will show:
- TA if the function is selected, - TA crossed out if the function is
selected but not available.
Any trafic information lash will
be given priority, whatever source
you are listening to (radio, CD, CD
changer or auxiliary equipment).
If you wish to interrupt a message,
press the audio equipment "ESC"
or "TA" button to return to the
source which was in use prior to the
interruption.
Note: the trafic information volume
is independent of the normal audio
equipment volume.
You can adjust it, during the
broadcasting of a message, using
the volume dial or the steering wheel
control. The setting is stored and will
be used when the next messages
are broadcast.

Audio equipment and telematics42 -
01-03-2005
43Audio equipment and telematics-
01-03-2005
Search by type of programme
(PTY)
This is a search by type of
programme, if the coding is activated
by the broadcasting stations.
It allows you to listen to stations
broadcasting a speciic type of
programme (news, culture, sport,
rock, weather, etc.)."RADIO" menu
Press the "MENU"
button to access the
general menu and
select the "Audio
functions" menu then
"FM waveband pref-
erences" or press the
"OK" button in radio
mode to select the fol-
lowing functions:
- Activate/Deactivate frequency following (RDS),
- Activate/Deactivate regional mode (REG),
- Activate/Deactivate displaying of the radio text (RDTXT).
Press the "TA/PTY"
button to access this
function. To search for a type of PTY
programme:
- press the "TA/PTY" button,
- press button 5 or
6 to scroll down the
list of the various
types of programmes
offered, then conirm
the selection using the
"OK" button.
The list of stations is available after a period
during which the FM
waveband is searched.
- when the list of stations corresponding to the type of
programme is displayed, press
button 5 or 6 to select a station,
then conirm the selection using the
"OK" button.
To switch the PTY function off, select
"Deactivate PTY" from the list of the
various types of programme offered.
EON system
This system connects stations which
are part of the same network. It
enables the broadcasting of TA trafic
information by a station that is part
of the same network as the station to
which you are listening.
This service is available when
you have selected the TA trafic
information programme.

Audio equipment and telematics42 -
01-03-2005
43Audio equipment and telematics-
01-03-2005
RDSRegional following mode (REG)
When they are part of a network,
certain stations broadcast regional
programmes in the various areas
which they serve. The regional
following mode enables you to
continue listening to the same
programme.
To access the function, press the
"MENU" button, select the "Audio
functions" menu then "FM waveband
preferences" or press the "OK"
button in radio mode.
The "RADIO" contextual menu
appears.
Select "Activate regional mode
(REG)" or "Deactivate regional mode
(REG)" depending on the status
of the function on the multifunction
display.
The multifunction display will show:
- REG if the function is selected,
- REG crossed out if the function is selected but not available.
Using the RDS (Radio Data
System) function on FM
The RDS allows you to continue
listening to the same station
whatever frequency it is using in the
region you are going through. The
display indicates the name of the
station selected.
However, poor coverage of the
network or particular environmental
conditions may interfere with the
transmission.
The radio is continually searching for
the transmitter which is transmitting
the same programme with the best
reception.
To access the function, press the
"MENU" button, select the "Audio
functions" menu then "FM waveband
preferences" or press the "OK"
button in radio mode.
The "RADIO" contextual menu
appears.
Select "Activate frequency following
(RDS)" or "Deactivate frequency
following (RDS)" depending on
the status of the function on the
multifunction display.
The multifunction display will show:
- RDS if the function is selected,
- RDS crossed out if the function is
selected but not available.

Audio equipment and telematics44 -
01-03-2005
45Audio equipment and telematics-
01-03-2005
Selecting a track
Press button 8 to select the next
track.
Press button 7 to return to the start
of the current track or to select the
previous track.
You can also select a track directly
via the list of tracks on the CD:
- press the "LIST REFRESH" button to display the list,
- press button 5 or 6 to select the
track,
- press the "OK" button to play the track.
Accelerated play
Keep button 8 or 7 pressed for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released. "CD" menu
Press the "MENU"
button to access the
general menu and
select the "Audio
functions" menu
then "Audio CD
preferences" or press
the "OK" button in CD
mode to select the
following functions:
- Activate/Deactivate playing of the track
intros (SCAN),
- Activate/Deactivate random playing of the tracks (RDM),
- Activate/Deactivate CD information (CDTXT).
A function selected from the "CD"
menu remains active when the CD
changer mode is selected.
Insert circular compact
discs only.
Some anti-pirating systems,
on original discs or CDs
copied by a personal CD
writer may cause malfunctions,
irrespective of the quality of the
original player.Compact disc
The CD player, incorporated in your
audio equipment, is compatible with
displaying of the CD Text  mode.
CDs which do not use this mode
will display the number of each track
instead of the name of the artist and
the title of the song. This function is
not available with the CD changer.
With the audio
equipment on and
after insertion of
a disc, printed
face upwards, the
CD player starts
automatically.
If a disc is already inserted, press
the "SOURCE" button to select the
CD player.
Selecting CD mode
Ejection of a disc
Press the button to
eject the disc from the
player.

Audio equipment and telematics44 -
01-03-2005
45Audio equipment and telematics-
01-03-2005
CD changer
Selecting CD changer modePress the "SOURCE"
button several times.
To access the CD
changer, you must
insert at least one CD
in the changer.
Selecting a disc
Press one of the buttons "1" to "5"
on the CD changer to select the
corresponding disc.
Buttons 5 and 6 permit the
selection of the previous / next disc
in the changer.
Each time a disc is selected, a
window appears as a superimposed
display to indicate the presence of
discs in the changer cartridge:
- "Disc" if a CD is present,
- "Cannot be played" if the CD is faulty or upside down,
- Blank line if there is no CD present.
The CD Text  is not
available when playing a
CD via the changer. Selecting a track
Press button
8 to select the next
track.
Press button 7 to return to the start
of the current track or to select the
previous track.
Accelerated play
Keep button
8 or 7 pressed for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Insert circular compact
discs only. Some anti-
pirating systems, on
original discs or CDs copied
by a personal CD writer
may cause malfunctions,
irrespective of the quality of
the original player.
"CHANGER" menu
Press the "MENU"
button to access the
general menu and
select the "Audio
functions" menu then
"Audio CD preferen-
ces" or press the "OK"
button in CD changer
mode to select the fol-
lowing functions:
- Activate/Deactivate playing of the track intros (SCAN),
- Activate/Deactivate CD changer repeat (RPT),
- Activate/Deactivate random playing of the tracks (RDM).
These functions are only applied to
the tracks of the CD currently being
played.
A function selected in the
"CHANGER" menu remains active
when the CD mode is selected.

Audio equipment and telematics46 -
01-03-2005
47Audio equipment and telematics-
01-03-2005
CD CHANGER
This is located in the centre of the
fascia under the radio. It holds up to
5 discs.
To load the changer, insert the discs
with the printed side upwards.To select a disc, press the
corresponding button
"1" to "5"
briely. Play begins automatically.
To remove a disc, press the
corresponding button "1" to "5" for
more than two seconds.
Insert circular compact
discs only.
Some anti-pirating systems,
on original discs or CDs
copied using a personal
recorder, may cause malfunctions,
irrespective of the quality of the
original player.
In the cabriolet position, remember to
remove the compact discs from your
changer (risk of theft).