Peugeot 307 CC Dag 2005 Workshop Manual

Audio equipment and telematics46 -
01-03-2005
47Audio equipment and telematics-
01-03-2005
AUDIO SYSTEM
Presentation
Your 307 CC is itted with a JBL Hi-Fi
system, designed speciically for the
vehicle's passenger compartment.
At the heart of the system, a
240 Watt multifunction ampliier
(1), located behind the rear seat
back, independently controls
10 high acoustic deinition
speakers.
This system makes it possible
to obtain optimum reproduction
and distribution of the sound in
the vehicle, in the front and in the
rear, in the coupé version and in
the cabriolet version.
The speakers are located:
- in the fascia: two Tweeters (2)
itted in two Medium Range
Speakers (3) for clear and head-
on reproduction of the sound,
favouring listening in the front;
- in the front doors: two Woofers (4)
for reproduction of the bass (low
frequencies) in the front;
- in the passenger pillars: two Tweeters (5) itted in two
Subwoofers (6) for reproduction
of the extreme bass sounds (low
and very low frequencies) as well
as reproduction of the medium
range frequencies throughout the
passenger compartment. You will appreciate the clarity and
depth, noticing that the sound ills
the vehicle perfectly.
However, to beneit fully from your
JBL Hi-Fi system, you are advised
to adjust the AUDIO functions
(Bass, Treble, Front/rear balance,
Left/right balance)
to the central
position, select the musical ambience
"None" and set the Loudness to the
" ON " position in CD mode and to the
" OFF " position in radio mode.
Adjustment in the CD and radio
modes
The basic functions remain those of
the audio equipment.
No additional adjustment is required.

Audio equipment and telematics48 -
01-03-2005
49Audio equipment and telematics-
01-03-2005
CONTROL PANEL AND
FUNCTIONS LINKED WITH
THE RT3
The RT3 is a GPS audio/telephone,
power 4x35W, with a single CD player
and a hands-free type telephone on
the front panel.
This is itted with:
- a special socket for connection of the CD changer,
- 6 speakers (2 tweeters, 2 woofers and 2 broad band),
- a Radio / CD / CD Changer / Trip Computer / Telephone / Navigation
control panel,
- a tuner with 18 FM memories (3 wavebands) and 6 AM memo-
ries,
- a processor for digital processing of the sound, "DSP" (Digital Sound
Processor).
Anti-theft system
The RT3 GPS audio/telephone is
coded in such a way that it can
only work in your vehicle. If you
wish to install it in another vehicle,
contact your PEUGEOT dealer for
coniguration of the system.
The anti-theft system is automatic.
No action on your part is required.
CD player
With direct digital play.
If the function is active, interruption by
Trafic Information (TA) or telephone
is possible.
Radio
With RDS / REG / EON / TA / PTY
functions.
Radio Text compatible.
5 disc CD changer
With random play and playing of the
beginning of tracks functions.
If the function is active, interruption by
Trafic Information (TA) or telephone
is possible.

Audio equipment and telematics48 -
01-03-2005
49Audio equipment and telematics-
01-03-2005
Control pad
Emergency call.AUDIO: access to the musical
ambience, bass, treble, loudness,
rear/front sound distribution, left/right
sound distribution and automatic
volume adjustment settings.
LIST: displaying and updating of the
list of stations received, of the tracks
on the CD.
TA/PTY: TA function on / off (trafic
information priority) - access to the
PTY function (search by type of
programme, if the coding is activated
by the broadcasting stations).
BAND AST: selection of the
frequency wavebands FM1, FM2,
FMast (Autostore function) and AM.
Button (A)
ON / OFF and volume adjustment.
Button (B)
CD eject. Keypad (2)
TEL (green): pick up an incoming
call.
LION: access to the PEUGEOT
services menu.
TEL (red): hang up.
Keypad (3) (alphanumeric block)
Storing of the radio station.
Selection of the stored station, of the
CD in relation to the position in the
CD changer.
Telephone keypad - description
inputting keypad.
Keypad (4)
MODE: changing of the display of
the permanent application (audio
equipment, navigation, ...).
MENU: displaying of the general
menu.
ESC (Escape): cancellation of the
operation in progress.
DARK: 1
st press: black screen under
the banner - 2nd press: completely
black screen - 3rd press: return to the
display.
Keypad (5)
The navigator.
Flap for SIM card (not
supplied).
Keypad (1)
SOURCE: change of source between
radio, CD and CD changer.

Audio equipment and telematics50 -
01-03-2005
51Audio equipment and telematics-
01-03-2005
Audio equipment steering
wheel control
Volume adjustment
1. Increase by pressing the back
2. Decrease by pressing the back
1+2. Cutting off / Restoring of the
sound
Search / Selection by pressing
3. Higher radio frequency - CD /
CD changer: next
4. Lower radio frequency - CD /
CD changer: previous Press for conirmation
5.
Change of sound source,
pick up / hang up, selection
conirmation
Press for more than 2 seconds: access to the telephone
displays
Selection of stations / CD changer
CD by rotation
6. Higher stored station - Next CD -
Next item - Zoom plus
7. Lower stored station - Previous
CD - Previous item - Zoom
minus
Navigator
Located on the RT3 GPS audio/
telephone control keypad, this
enables you to select and conirm
the functions, commands and
parameters displayed.
It incorporates:
- the up 5, down 6, left 7, right 8
arrows which enable you to move
the cursor on the screen,
- the central button which enables you to move the cursor on the
screen and conirm.
All selections can be cancelled
prior to conirmation by pressing the
"ESC" button or automatically after a
few seconds without any action.
Details of each of the keypad controls
are indicated on the following pages. This allows you direct and easy
access to most of the audio and
telematic functions which are also
available on the audio/telephone
control panel.

Audio equipment and telematics50 -
01-03-2005
51Audio equipment and telematics-
01-03-2005
Audio equipment steering
wheel control
Volume adjustment
1. Increase by pressing the back
2. Decrease by pressing the back
1+2. Cutting off / Restoring of the
sound
Search / Selection by pressing
3. Higher radio frequency - CD /
CD changer: next
4. Lower radio frequency - CD /
CD changer: previous Press for conirmation
5.
Change of sound source,
pick up / hang up, selection
conirmation
Press for more than 2 seconds: access to the telephone
displays
Selection of stations / CD changer
CD by rotation
6. Higher stored station - Next CD -
Next item - Zoom plus
7. Lower stored station - Previous
CD - Previous item - Zoom
minus
Navigator
Located on the RT3 GPS audio/
telephone control keypad, this
enables you to select and conirm
the functions, commands and
parameters displayed.
It incorporates:
- the up 5, down 6, left 7, right 8
arrows which enable you to move
the cursor on the screen,
- the central button which enables you to move the cursor on the
screen and conirm.
All selections can be cancelled
prior to conirmation by pressing the
"ESC" button or automatically after a
few seconds without any action.
Details of each of the keypad controls
are indicated on the following pages. This allows you direct and easy
access to most of the audio and
telematic functions which are also
available on the audio/telephone
control panel.

Audio equipment and telematics50 -
01-03-2005
51Audio equipment and telematics-
01-03-2005
Voice commands
The voice commands enable you to
control a certain number of functions
of the RT3 GPS audio/telephone
by means of pre-recorded words or
phrases.
The list of voice commands available
appears when the "MENU" button is
pressed for more than two seconds.
Activation of the voice commands
From the general menu , select
the "Coniguration" menu, then
"Sound" to activate or deactivate
their use and set their volume. Example:
to recall the radio station
stored on button 3, the key words
are: "Radio" "Memory" "3".
In order to use these key words, you
must say the word "Radio", wait for
the audible conirmation signal, then
say the word "Memory", wait for the
audible conirmation signal, then end
with the word "3", wait for the audible
conirmation signal which will carry
out the action required.
Notes:
- between saying one key word and the next, a screen indicates the
time remaining and the key word
recognised,
- if no voice commands are given, this function will be deactivated
after approximately ive seconds,
- if the system does not understand, it says "Pardon" and displays "Word
not recognised" on the screen. Recording a description
associated with a directory ile
When a description is associated
with a directory ile, you can record
the description vocally so that it
can be used later for direct access
by means of voice commands
(e.g.: "
Call" " [Name of voice
description] " or "Guide to" "[Name
of voice description]" ).
Select "Consult or change the ile" on
the menu "Management of directory
iles" to gain access to the description
inputting and recording screen.
Press the record button and follow
the instructions.
Use of the voice commands
Before saying a description, press
the end of the lights stalk to start the
voice recognition.
Press again to switch it off.

Audio equipment and telematics52 -
01-03-2005
53Audio equipment and telematics-
01-03-2005
Level 1 Level 2 Level 3
RADIO PREVIOUS
NEXT
MEMORY 1 ... 6
AUTOSTORE
LIST
CD PLAYERPREVIOUS
TRACK
NEXT TRACK
TRACK
NUMBER1 ... 20
RANDOM
SCAN
REPEAT
LIST
CHANGER
PREVIOUS
TRACK
NEXT TRACK
TRACK
NUMBER
1 ... 20
PREVIOUS
DISC
NEXT DISC
DISC
NUMBER
1 ... 5
RANDOM
SCAN
REPEAT
LIST
Level 1 Level 2 Level 3
TELEPHONE
LAST
NUMBER
DIRECTORY
DESCRIPTION
SERVICES
VOICE BOX
VOICE MAIL
SMS
MESSAGEDISPLAY
READ
TRAFIC INFODISPLAY
READ
CALL
DESCRIPTION
NAVIGATION
GUIDANCE
STOP
RESUME
DIRECTORY
DESCRIPTION
ZOOM IN
ZOOM OUT
SHOWDESTINATION
VEHICLE
GUIDE TODESCRIPTION
DISPLAY
AUDIO
TELEPHONE
NAVIGATION
TRIP
COMPUTER
GUIDANCE
List of voice commands available
The key words which can be
recognised by the system are
organised in three levels (levels 1,
2 and 3).
When you say a level 1 command, the
system makes the level 2 commands
available; when you say a level 2
command, the system makes the
level 3 commands available.
The level 1 commands are: RADIO /
CD PLAYER / CHANGER /
TELEPHONE / SMS / MESSAGE /
TRAFFIC INFO / CALL (a person
recorded in the directory) /
NAVIGATION / GUIDANCE / GUIDE
TO (guidance to the address of a
person recorded in the directory) /
DISPLAY (change of permanent
application).
Saying the words HELP or WHAT
CAN I SAY displays all of the
commands available on the screen.
Saying the word CANCEL cancels all
of the voice commands.
Miscellaneous words: STOP /
DELETE / YES / NO / PREVIOUS /
NEXT

Audio equipment and telematics52 -
01-03-2005
53Audio equipment and telematics-
01-03-2005
General functions
On/offPress the button
to switch the audio
function of the RT3
GPS audio/telephone
on or off.
The RT3 GPS audio/
telephone can operate for approxi-
mately 30 minutes without the ve-
hicle’s ignition being switched on,
under normal conditions of use and
maintenance of the battery.
After the ignition has been switched
off, the audio/telephone can be
switched on again by pressing the
"TEL" (green) button or by inserting
a CD in the player.
Adjusting the volume
Turn the dial clockwise to increase
the volume of the audio/telephone or
anti-clockwise to decrease it.
The volume setting is speciic to each
source. It is possible to have different
settings for radio, CD or CD changer,
telephone or voice synthesiser. Audio settings
Press the "AUDIO"
button several times
to access the
Musical
Ambience, Bass, Tre-
ble, Loudness, front/
rear sound distribu-
tion (Fader), right/left sound distribu-
tion (Balance) and Automatic Volume
Adjustment setting windows.
Exit from audio mode is by pressing
the "ESC" button or is automatic after
a few seconds without any action.
Bass, treble and loudness settings
are speciic to each source. It is
possible to have different settings for
radio, CD or CD changer.
Musical ambience
This function permits the selection
of a musical ambience: "None",
"Classical", "Jazz-Blues", "Pop-
Rock", "Techno" or "Vocal".
Select the musical ambience using
the navigator.
Selecting a musical ambience sets
the bass and treble automatically.
Selecting "None" permits access to
all of the settings deined below. Adjusting the Bass
When "Bass" is displayed, vary the
setting using the navigator:
- "-9" for minimum bass setting
- mid-way for normal bass setting
- "+9" for maximum bass setting
Adjusting the Treble
When "Treble" is displayed, vary the
setting using the navigator:
- "-9" for minimum treble setting
- mid-way for normal setting
- "+9" for maximum treble setting
Adjusting the loudness
The loudness automatically empha-
sises bass and treble tones when the
volume is low.
Switch the function on or off using
the navigator.

Audio equipment and telematics54 -
01-03-2005
55Audio equipment and telematics-
01-03-2005
Setting the right/left sound
distribution
When "Left - Right Balance" is
displayed, vary the setting using the
navigator:
- clockwise to increase the volume on the right,
- anti-clockwise to increase the volume on the left.
Setting the rear/front sound
distribution
When "Rear - Front Balance" is
displayed, vary the setting using the
navigator:
- clockwise to increase the volume in the front,
- anti-clockwise to increase the volume in the rear.
Automatic volume adjustment
This function allows the volume to
be adjusted automatically depending
on the level of noise produced by the
speed of the vehicle.
Switch the function on or off using
the navigator.Radio
Notes on radio reception
The quality of the radio reception is
subject to external phenomena, due
to the nature of the signals and the
way in which they are transmitted.
Both MW/LW and FM are subject to
various forms of interference. This is
not a relection on the quality of the
equipment.
On MW/LW interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the
result of increasing distance from
the transmitter, delection of the
signals by obstacles (mountains,
hills, buildings, etc.) or of being in
an area which is not covered by a
transmitter.
Selecting radio mode Press the "SOURCE"
button several times. Selecting a waveband
Briely press the
"BAND AST" button
several times to select
the FM1, FM2, FMast
and AM wavebands.
Automatic station search
Briely press button 7 or 8 to
search for the station immediately
below or above.
The search stops at the irst station
found.
If the TA trafic information pro-
gramme is selected, only the most
powerful stations broadcasting this
type of programme are selected.
Searching for a station occurs
irst in "LO" sensitivity (selection
of the most powerful transmitters)
during scanning of the waveband,
then in "DX" sensitivity (selection
of the weaker and more distant
transmitters).
To make a direct search in "DX"
sensitivity, briely press button 7
or 8 twice.

Audio equipment and telematics54 -
01-03-2005
55Audio equipment and telematics-
01-03-2005
Setting the right/left sound
distribution
When "Left - Right Balance" is
displayed, vary the setting using the
navigator:
- clockwise to increase the volume on the right,
- anti-clockwise to increase the volume on the left.
Setting the rear/front sound
distribution
When "Rear - Front Balance" is
displayed, vary the setting using the
navigator:
- clockwise to increase the volume in the front,
- anti-clockwise to increase the volume in the rear.
Automatic volume adjustment
This function allows the volume to
be adjusted automatically depending
on the level of noise produced by the
speed of the vehicle.
Switch the function on or off using
the navigator.Radio
Notes on radio reception
The quality of the radio reception is
subject to external phenomena, due
to the nature of the signals and the
way in which they are transmitted.
Both MW/LW and FM are subject to
various forms of interference. This is
not a relection on the quality of the
equipment.
On MW/LW interference may be
noticed when passing under high
voltage power lines or bridges, or in
tunnels.
On FM, interference may be the
result of increasing distance from
the transmitter, delection of the
signals by obstacles (mountains,
hills, buildings, etc.) or of being in
an area which is not covered by a
transmitter.
Selecting radio mode Press the "SOURCE"
button several times. Selecting a waveband
Briely press the
"BAND AST" button
several times to select
the FM1, FM2, FMast
and AM wavebands.
Automatic station search
Briely press button 7 or 8 to
search for the station immediately
below or above.
The search stops at the irst station
found.
If the TA trafic information pro-
gramme is selected, only the most
powerful stations broadcasting this
type of programme are selected.
Searching for a station occurs
irst in "LO" sensitivity (selection
of the most powerful transmitters)
during scanning of the waveband,
then in "DX" sensitivity (selection
of the weaker and more distant
transmitters).
To make a direct search in "DX"
sensitivity, briely press button 7
or 8 twice.