Peugeot 307 CC Dag 2005 Manual PDF

Audio equipment and telematics64 -
01-03-2005
65Audio equipment and telematics-
01-03-2005
Emergency call*
In an emergency, press
and hold the "SOS"
button until a signal
is heard and a call
validation / deletion
screen is displayed
(delay of 6 seconds) or enter 112
directly.
Make an emergency call when you
are involved in a situation which leads
you to fear serious consequences
(injuries, ...) for those exposed to
it (if you witness or are involved in
an accident resulting in injuries, an
attack, ...).
Before making a call of this kind,
the audio/telephone must detect a
cellular network and you must have
inserted your SIM card .
If you have not signed the speciic
PEUGEOT contract, the parameters
of the "SOS" button are set so
that a call is made to 112 - unique
number made available by the
worldwide GSM network, reserved
for emergency calls.
If you have signed the speciic
PEUGEOT contract, your call will be
located and you will be put in contact
with a PEUGEOT emergency
representative.
For further details, refer to the
general conditions of your contract.
"PEUGEOT Assistance" /
Emergency call
A green diode lashes on the RT3
GPS audio/telephone panel, when
the emergency call procedure or
a call to "PEUGEOT Assistance"
begins, then lights continuously
when the call is taken by the services
concerned.
It is not possible to make or receive
calls or send or receive SMS text
messages during the connection;
these will be diverted to your voice
mail.
Directory
General
The "Directory" application gives
access to 400 iles divided into
4 independent sub-directories
("User1", "User2", "User3" and
"User4"). It enables you to manage
these iles, make calls using the SIM
card and activate guidance.
* If option and service available. Main menu
From the general menu,
select the "Directory"
application to access its
main menu and select
one of the following
functions:
• "Call", to call a number stored in a ile,
• "Activate guidance to", to initiate guidance to a location stored in a
ile,
• "Management of directory iles", to add, delete, modify and consult
directory iles or exchange them
with the SIM card,
• "Directory coniguration", to select the working directory and deine
the default directory when the
system is switched on.

Audio equipment and telematics66 -
01-03-2005
Creation / Modiication of a ile
To create a ile, from the "Directory"
menu, select the "Management of
directory iles" function, then "Add".
In the ile, select the section to be
illed in, conirm and then enter the
information.
To modify an existing ile, select it by
means of the "Consult or modify the
ile" function of the "Management of
directory iles" menu, then make the
modiications.
When entering the address, the
navigation CD ROM must be
present to obtain guidance to this
destination.Recording a description
associated with a directory ile
When a description is associated
with a directory ile, you can record
the description vocally to use it later
for direct access by means of voice
commands (e.g.: "Call" "[Name of
voice description]" or "Guide to"
"[Name of voice description]").
Select "Consult or modify the ile"
from the "Management of directory
iles" menu to access the description
entering and recording screen.
Press the record button and follow
the instructions.RDS TMC (Trafic Message
Channel) Trafic Information
You can access the information
relating to trafic conditions from the
"Audio functions" or "Telematics"
menu, then from the "TMC Trafic
Information" function (see section
"Satellite navigation system").
The RT3 GPS audio/telephone
permits access to the TMC RDS
trafic information broadcast free on
the FM waveband.

67Audio equipment and telematics-
01-03-2005
SATELLITE NAVIGATION
SYSTEM
Introduction
The satellite navigation system
guides you, by means of vocal and
visual instructions, to your chosen
destination.
The heart of the system lies in the
use of a map data base and the GPS
(Global Positioning System). With
this system you can ix the position of
your vehicle by means of a satellite
network.
The system uses the following
elements:
- the CD-Rom drive,
- the coniguration CD-Rom
- the navigation CD-Rom,
- the last voice message recall control,
- the control panel,
- the CT monochrome screen or the DT colour screen .
The CD-Rom drive
This is part of the RT3 GPS audio/
telephone.
1. Ejection button on CD-Rom.
2. CD-Rom housing.
The coniguration CD-Rom contains
the language and type and voice
synthesiser voice parameters.
The navigation CD-Rom contains all
the map data.
It must be inserted in the drive,
printed face upwards.
The last voice message recall
control.
Pressing for more than two seconds
on the button at the end of the
lights stalk repeats the last voice
information.
Use only CD-Roms recom-
mended by PEUGEOT.
During guidance, the
navigation CD-Rom must
remain in the RT3 GPS
audio/telephone drive; if you wish to
listen to an audio CD, you must use
the CD changer.
In the cabriolet position, remember
to remove the CD Rom from the
drive (risk of theft).
Certain functions or
services described may
vary depending on the
version of CD-Rom or the
country where the vehicle
is sold.
For safety reasons, the inputting of
navigation information by the driver
must be carried out when the vehicle
is stationary.

Audio equipment and telematics68 -
01-03-2005
69Audio equipment and telematics-
01-03-2005
The control panel
This lets you navigate, select, choose
and validate the functions, from the
parameters displayed. 'MENU' button:
- brief press: access to the
general
menu.
- press for more than two seconds: access to the help menu and to
the list of voice commands .Rotation of the navigator:
This allows you to
move round the
screen and thus select a function.
It also allows you:
- with a "setting" type parameter,
after selection, to increase or
decrease the value,
- with a "list" type parameter, after
opening the list, to scroll through
the values,
- with map guidance, to increase or
decrease zoom.
'MODE' button:
- brief press: modiication of
permanent display (audio system,
navigation / guidance...).
- Press for more than two seconds: display of general information.
Pressing the navigator:
This allows:
- access to the list of controls
(contextual menu) of the permanent
application displayed, if there is no
other display superimposed,
- conirmation of the selected
function or of the modiied value,
- selection of a "setting" or "list"
type parameter for modiication.
Tip:
You can access the general menu
by pressing the RT3 GPS audio/
telephone navigator.
'ESC' button:
- brief press:
cancelling of operation
in progress or erasing of last
superimposed display.
- pressing for more than two sec- onds: erasing of all superimposed
displays and return to the perma-
nent display.

Audio equipment and telematics68 -
01-03-2005
69Audio equipment and telematics-
01-03-2005
General notes on the display
Monochrome screen CTPermanent locating
When guidance is not activated, this
function permits displaying of the
name of the street along which the
vehicle is travelling, if the navigation
CD-Rom is in the drive.
Press the navigator for more than
two seconds to display the name
of the street along which you are
travelling.
Colour screen DT During guidance, if the navigation
CD-Rom is present, the screen
displays different information
depending on the manoeuvres to be
carried out.
1.
Current manoeuvre or compass
or course (if calculation in
progress or zone not mapped).
2. Next manoeuvre to be carried
out.
3. Next road to be taken.
4. Current road.
5. Estimated time of arrival at
destination.
6. Distance to inal destination.
7. Distance to next manoeuvre.
Note: depending on the situation of
the vehicle and on the reception of
GPS information, this information
may disappear from the screen
temporarily. Initialisation of the system
Following disconnection of the
battery, the navigation system must
be reinitialised:
- place the vehicle in the open air,
so that it can make contact with at
least one satellite,
- place the ignition key in the running position,
- wait for ifteen minutes.

Audio equipment and telematics70 -
01-03-2005
71Audio equipment and telematics-
01-03-2005
Access via the general menu
Switch on the RT3 GPS audio/
telephone and insert the navigation
CD-Rom.
Press the "MENU" button to access
the general menu . Navigation - Guidance Selecting a destination
Select the Navigation/Guidance icon
using the navigator, then validate
by pressing the navigator to access
the main
"Navigation - Guidance"
menu. The main
"Navigation - Guidance"
menu offers various options for
activation or management of
guidance:
- choice of the type of destination address (entering of address,
service, GPS co-ordinates, stored
address),
- modiication to the initial route,
- displaying of the chosen destination,
- setting of the guidance option parameters,
- stop or resume guidance (displaying of the message which changes
depending on the previous status). The
"Destination choice" menu
offers various options for reaching a
destination:
- entering a postal address,
- selecting a service available in a town (town hall, hotel, cinema,
airport...).
- entering GPS details,
- selecting a destination stored in the directory,
- selecting one of the previous destinations.

Audio equipment and telematics70 -
01-03-2005
71Audio equipment and telematics-
01-03-2005
Entering an address
The last guidance address is
displayed.
To ill in the entry zones, select and
validate in succession the zones
"Town", "Road" , then "N°" (the last
two are optional).
The "OK" function permits validation
of the address and access to the
guidance activation function.
The "Store" function permits
recording of the address in a
directory ile.
The "Curr. loc" function permits
display of the current address. Entering the name of the town
When the list contains fewer than
ive names, these are displayed
automatically. Select a town then
validate by pressing the navigator.
When the complete name of the
town is displayed, select the "OK"
function then conirm by pressing the
navigator.
Note: once the town has been
entered, you can conirm by pressing
"OK" . You will then be guided to the
centre of this town automatically.
Entering the name of the road
Enter the name of the street in the
same way as the name of the town.
When the full name of the street is
displayed, select the "OK" function
then conirm by pressing the
navigator.
To enter the name of a town, select
each letter by turning the navigator,
then validate each letter by pressing
the navigator.
If an error is made entering the
letters, the
"Change" function
permits erasing of the last letter
entered.
Note: following the validation of a
letter, only those which could make
up a name existing in the database
appear.
As letters are entered, the "List"
function indicates the number of
towns beginning with the same
letters. Activation of this function
permits selection of a town from the
list. Entering the town and road using
the alphanumeric keypad
Press the numeric key which
corresponds to the letter required
until the letter appears on the screen,
then conirm by pressing the
# key
after each letter.

Audio equipment and telematics72 -
01-03-2005
73Audio equipment and telematics-
01-03-2005
Entering the number of the road
or junction
Enter the number of the street
previously entered.
Select the "OK" function, then
conirm by pressing the navigator.
Note: if the number of the street
entered is not listed, it is rejected.
The list of junctions is displayed
automatically.
Select a street from the "Junctions"
function, this avoids having to enter
the street number.
The full destination is displayed.
Select the "OK" function, then
conirm by pressing the navigator
to access the guidance activation
function. Follow the instructions
given by the system. Selecting a service
If you wish to be directed to a service,
select the
category corresponding to
the service , then conirm by pressing
the navigator.
The list of services corresponding to
the category selected is displayed.
Select the service then conirm by
pressing the navigator to access the
"Choice of a location" function.
The last address entered is
displayed.
There are three options for deining
the location in which you wish to
obtain this service:
- accept the last address entered using the "OK" function,
- ill in the "Town" and "Road"
zones,
- automatically enter the name of your current location using the
"Curr. loc." function. Note:
if the service selected is
not available in the programmed
location, a temporary message
informs you of this.
Following validation of the location,
the service closest to it is displayed.
The distance indicated is the distance
as the crow lies from the service to
the selected location.
An indication on the edge of the
screen (x/n) shows you the maximum
number of establishments providing
the same service within a radius of
30 miles (50 km), as the crow lies,
from the selected location.
Use buttons "<<" and ">>" to consult
the list provided.
When the establishment of your
choice is displayed, you can:
- select the "OK" function to activate
guidance towards this service,
- select the "Store" function to
enter this establishment in your
directory.

Audio equipment and telematics72 -
01-03-2005
73Audio equipment and telematics-
01-03-2005
GPS details Selecting a destination stored in the directory Selection of one of the previous
destinations
The most recent destinations are
shown.
There are three possible methods
of deining the location to which you
wish to travel:
- accept the last details input by
means of the "OK" function,
- input the details of your destination,
- automatically input the details of your current location by means of
the "Curr. loc." function. Select the
''Directory'' function to
access the ile in which the address
you are looking for is archived.
Select a description by scrolling
down the list by means of the
navigator, then conirm by pressing
the navigator. The directory ile is
then displayed.
Select the "OK" function, then press
the navigator to access the guidance
activation function.
Follow the directions given by the
system. Select the
"Previous destinations"
function to access one of the last
twenty addresses stored.
Select a description by scrolling
down the list by means of the
navigator, then conirm it by pressing
the navigator. The complete address
is then displayed.
Select the "OK" function, then press
the navigator to access the guidance
activation function.
Follow the instructions given by
the system.

Audio equipment and telematics74 -
01-03-2005
75Audio equipment and telematics-
01-03-2005
Changing the initial route Guidance options
Activate the function ''Divert route'',
then input the distance involved in
the change required.
Select the ''OK'' function then
validate by pressing the navigator.
The system calculates the change
which is closest to the value input
and gives you the option of whether
or not to use this change. The menu
''Guidance options''
provides access to the following
functions:
- changing of the route calculation criteria,
- voice synthesis adjustment of guidance messages,
- description of the information relating to the navigation CD-Rom,
- management of the addresses stored in the directory.
Calculation criteria
The last criterion used is displayed.
Select a criterion from the list, then
validate by pressing the navigator.
When the criterion of your choice
has been selected, select the "OK"
function then conirm by pressing the
navigator.
Adjusting the voice synthesiser
Select the type of voice "male"
or "female" , after inserting the
coniguration CD-Rom.
Adjust the volume of the voice
synthesis by turning the navigator,
then validate by pressing the
navigator.
Note: the volume can also be
adjusted during a message, using
the audio/telephone button or the
steering wheel control.
Details of the route
You can consult or change the
destination address at any time by
activating the
"Chosen destination"
function on the "Navigation-
Guidance" menu.